Wraps by car

Tatra 77 wrap

The Tatra 77 wrap page covers the first generation of the Tatra 77 luxury sedan, produced from 1934 to 1938. A full vinyl wrap of this classic car takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the amount to about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Tatra 77, first generation, factory photo
Tatra 77, first generation. Factory color shown.

Tatra 77 wrap colors and ideas

  • Tatra 77 black wrap
  • Tatra 77 white wrap
  • Tatra 77 gray wrap
  • Tatra 77 silver wrap
  • Tatra 77 red wrap
  • Tatra 77 blue wrap
  • Tatra 77 green wrap
  • Tatra 77 yellow wrap
  • Tatra 77 orange wrap
  • Tatra 77 purple wrap
  • Tatra 77 pink wrap
  • Tatra 77 teal wrap
  • Tatra 77 brown wrap
  • Tatra 77 gold wrap
  • Tatra 77 chrome wrap
  • Tatra 77 color shift wrap
  • Tatra 77 carbon fiber wrap
  • Tatra 77 camo and patterned wrap

How much vinyl to wrap a Tatra 77

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1934–1938sedan (4 doors)196.9 in (5,000 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Tatra 77 wrap cost factors

The Tatra 77 wrap cost depends on the amount of film needed, which is about 54 ft (16.5 m) for a standard color change wrap. If you choose chrome or patterned film, the estimate rises to about 67 ft (20.5 m). Labor also depends on the car's age and the condition of the paint, as older panels may need extra preparation.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Tatra 77 wraps by generation

Swipe sideways. Tap a card for the full description.

Tatra 77, first generation, factory photo
Factory color shown

1934–1938 Tatra 77 sedan (first generation)

1934–1938sedan (4 doors)196.9 in (5,000 mm)

The first generation Tatra 77, built from 1934 to 1938, may have original or repainted panels due to its age. Before a full wrap, you should perform a test spot to check paint adhesion. A professional installer can advise on the best surface preparation for your car.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Tatra 77

A partial wrap on a Tatra 77 can include the roof, hood, or mirror caps to change the look without covering the whole car. Chrome delete involves covering the window trim and badges with black film. Clear paint protection film (PPF) on the front end guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Tatra 77: body, cut-outs and film

The Tatra 77 vinyl wrap covers a four-door sedan with an overall length of 196.9 in (5,000 mm). The large body panels and long roofline mean you need wide film and careful planning to avoid seams on visible areas. The rear engine cover and sloping tail require extra material for proper coverage. A full wrap on this car uses more film than a typical modern sedan.

Tatra 77 wrap ideas must account for the distinctive rear fin and the split rear window, which are challenging to wrap without relief cuts. Door handles, badges, and the front grille come off for a cleaner installation. The window trim and bumpers are chrome, so they need either wrapping or removal for chrome delete.

To estimate how much vinyl to wrap a Tatra 77, note that only one generation exists in this catalog, produced from 1934 to 1938. The body style remained a four-door sedan throughout these years. Therefore, the film estimate remains the same for any Tatra 77 you wrap.

Questions about wrapping a Tatra 77

How much vinyl does it take to wrap a Tatra 77?

A Tatra 77 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the amount rises to about 67 ft (20.5 m).

Can I wrap only the hood or the roof of a Tatra 77?

Yes, you can wrap only the hood or the roof of a Tatra 77. A partial wrap may also include mirror caps, chrome delete on window trim and badges, or clear paint protection film on the front end.

Is a Tatra 77 hard to wrap?

Yes, a Tatra 77 is hard to wrap because of its long body and the rear fin and split rear window. These features require relief cuts and extra patience. The chrome trim and badges also need removal or careful masking.

How many generations of the Tatra 77 does this page cover?

This page covers one generation of the Tatra 77, produced from 1934 to 1938.