Wraps by car

Tatra 87 wrap

The Tatra 87 wrap page covers the first generation produced from 1936 to 1950. This single generation is a luxury four-door sedan body style. A full wrap of this body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m) for the same coverage.

1generations17.5 mof film for a full wrap

Tatra 87, first generation, factory photo
Tatra 87, first generation. Factory color shown.

Tatra 87 wrap colors and ideas

  • Tatra 87 black wrap
  • Tatra 87 white wrap
  • Tatra 87 gray wrap
  • Tatra 87 silver wrap
  • Tatra 87 red wrap
  • Tatra 87 blue wrap
  • Tatra 87 green wrap
  • Tatra 87 yellow wrap
  • Tatra 87 orange wrap
  • Tatra 87 purple wrap
  • Tatra 87 pink wrap
  • Tatra 87 teal wrap
  • Tatra 87 brown wrap
  • Tatra 87 gold wrap
  • Tatra 87 chrome wrap
  • Tatra 87 color shift wrap
  • Tatra 87 carbon fiber wrap
  • Tatra 87 camo and patterned wrap

How much vinyl to wrap a Tatra 87

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1936–1950sedan (4 doors)186.6 in (4,740 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Tatra 87 wrap cost factors

The Tatra 87 wrap cost depends on the film type and the condition of the original paint. A 186.6 in (4,740 mm) body with many curves requires more labor time than a flat-sided car. Chrome or patterned film costs more than standard cast film and needs about 66 ft (20 m). Paint correction before wrapping adds preparation time and materials.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Tatra 87 wraps by generation

Swipe sideways. Tap a card for the full description.

Tatra 87, first generation, factory photo
Factory color shown

1936–1950 Tatra 87 sedan (first generation)

1936–1950sedan (4 doors)186.6 in (4,740 mm)

The first generation Tatra 87 spans 1936 to 1950 and is the only body style on this page. Paint age varies greatly on a car of these years, with some panels original and others repainted. A test spot on the paint before a full wrap checks adhesion without damaging old finishes. Installers should inspect each panel for rust or filler before film is applied.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Tatra 87

A partial wrap on a Tatra 87 can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end protects the nose and fenders from stone chips. These jobs use less film than a full wrap and are a way to change or protect part of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Tatra 87: body, cut-outs and film

The Tatra 87 vinyl wrap starts with a body measuring 186.6 in (4,740 mm) in length. The four-door sedan shape has long, curved panels that require careful film stretching. Installers should plan for more material than a modern car of similar length. The length and rounded rear section mean film is consumed faster on the roof and fenders.

Tatra 87 wrap ideas must account for the car's distinctive features. The rear engine cover and the dorsal fin require cut-outs for vents and hinges. Door handles, window trim, and the front grille are removed for a clean edge. The badges and lights are also taken off before wrapping these panels.

To know how much vinyl to wrap a Tatra 87, compare film needs across this generation's production run. The body dimensions remain the same for all years from 1936 to 1950. Some later cars have a slightly different rear window shape, which changes the amount of film for that area. The 57 ft (17.5 m) figure is the safe estimate for any Tatra 87.

Questions about wrapping a Tatra 87

How much vinyl does it take to wrap a Tatra 87?

A full wrap of a Tatra 87 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 66 ft (20 m). This estimate covers the entire four-door sedan body without film for the windows or trim.

Can I wrap only the hood or the roof of a Tatra 87?

Yes, you can wrap only the hood or the roof of a Tatra 87. A partial wrap can also cover the mirror caps. Chrome delete on the window trim and badges is another smaller job. Clear paint protection film on the front end protects without changing the color.

Is a Tatra 87 hard to wrap?

A Tatra 87 is not a simple car to wrap because of its length and curved panels. The 186.6 in (4,740 mm) body has long roof and fender sections that need two people to handle film. The rear engine cover and dorsal fin require careful trimming and cut-outs. Old paint may also need more preparation before the film is applied.

How many generations of the Tatra 87 does this page cover?

This page covers one generation of the Tatra 87, produced from 1936 to 1950. The first generation is the only body style in the catalog for this model.