Wraps by car

Tatra T603 wrap

The Tatra T603 wrap page covers the first and second generations of this rear-engined sedan. Two generations are listed, both with the same four-door body. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

2generations19 mof film for a full wrap

Tatra T603, second generation, factory photo
Tatra T603, second generation. Factory color shown.

Tatra T603 wrap colors and ideas

  • Tatra T603 black wrap
  • Tatra T603 white wrap
  • Tatra T603 gray wrap
  • Tatra T603 silver wrap
  • Tatra T603 red wrap
  • Tatra T603 blue wrap
  • Tatra T603 green wrap
  • Tatra T603 yellow wrap
  • Tatra T603 orange wrap
  • Tatra T603 purple wrap
  • Tatra T603 pink wrap
  • Tatra T603 teal wrap
  • Tatra T603 brown wrap
  • Tatra T603 gold wrap
  • Tatra T603 chrome wrap
  • Tatra T603 color shift wrap
  • Tatra T603 carbon fiber wrap
  • Tatra T603 camo and patterned wrap

How much vinyl to wrap a Tatra T603

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1975sedan (4 doors)199.4 in (5,065 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1956–1968sedan (4 doors)199.4 in (5,065 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Tatra T603 wrap cost factors

Tatra T603 wrap cost depends on the amount of film and the prep work. The body needs about 62 ft (19 m) of 60-inch (1.52 m) cast film. The age of the paint can add time for cleaning and testing.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Tatra T603 wraps by generation

Swipe sideways. Tap a card for the full description.

Tatra T603, second generation, factory photo
Factory color shown

1968–1975 Tatra T603 sedan (second generation)

1968–1975sedan (4 doors)199.4 in (5,065 mm)

The second generation Tatra T603 was produced from 1968 to 1975. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The 199.4 in (5,065 mm) length means the same amount of film as the first generation.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Tatra T603, first generation, factory photo
Factory color shown

1956–1968 Tatra T603 sedan (first generation)

1956–1968sedan (4 doors)199.4 in (5,065 mm)

The first generation Tatra T603 was produced from 1956 to 1968. The size and the body style of this car mean the amount of film and the number of panels are fixed. The four-door sedan body is 199.4 in (5,065 mm) long and uses about 62 ft (19 m) of 60-inch (1.52 m) film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Tatra T603

A partial wrap on a Tatra T603 covers the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Tatra T603: body, cut-outs and film

The Tatra T603 vinyl wrap uses a body length of 199.4 in (5,065 mm) in a four-door sedan style. The even shape means film can be laid with fewer relief cuts. The large roof and tall side panels add to the film used.

For Tatra T603 wrap ideas, the badges and window trim are the main parts that need cut-outs. The door handles and mirrors come off for a cleaner edge. The front grille is not removed, but its surround is wrapped as a separate piece.

How much vinyl to wrap a Tatra T603 depends on the generation. The first and second generations have the same length of 199.4 in (5,065 mm), so the amount of film is the same. The first generation was made from 1956 to 1968, the second from 1968 to 1975.

Questions about wrapping a Tatra T603

How much vinyl does it take to wrap a Tatra T603?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Tatra T603. A chrome or patterned film needs about 72 ft (22 m).

Can I wrap only the hood or the roof of a Tatra T603?

Yes, you can wrap only the hood or the roof of a Tatra T603. A partial wrap on this car can include the roof, hood, or mirror caps.

Is a Tatra T603 hard to wrap?

A Tatra T603 is not hard to wrap, but the age of the paint adds work. The body is 199.4 in (5,065 mm) long, so a full wrap uses about 62 ft (19 m) of film.

How many generations of the Tatra T603 does this page cover?

This page covers two generations of the Tatra T603. They are the first generation from 1956 to 1968 and the second generation from 1968 to 1975.