Wraps by car

Tatra T700 wrap

The Tatra T700 wrap page covers the full-size sedan built from 1996 to 1999, presented here in one generation. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Tatra T700, first generation, factory photo
Tatra T700, first generation. Factory color shown.

Tatra T700 wrap colors and ideas

  • Tatra T700 black wrap
  • Tatra T700 white wrap
  • Tatra T700 gray wrap
  • Tatra T700 silver wrap
  • Tatra T700 red wrap
  • Tatra T700 blue wrap
  • Tatra T700 green wrap
  • Tatra T700 yellow wrap
  • Tatra T700 orange wrap
  • Tatra T700 purple wrap
  • Tatra T700 pink wrap
  • Tatra T700 teal wrap
  • Tatra T700 brown wrap
  • Tatra T700 gold wrap
  • Tatra T700 chrome wrap
  • Tatra T700 color shift wrap
  • Tatra T700 carbon fiber wrap
  • Tatra T700 camo and patterned wrap

How much vinyl to wrap a Tatra T700

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–1999sedan (2 or 4 doors)196.3 in (4,985 mm) to 202.4 in (5,140 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Tatra T700 wrap cost factors

The Tatra T700 wrap cost depends on the size of the car and the condition of its paint. A body between 196.3 in (4,985 mm) and 202.4 in (5,140 mm) long takes about 61 ft (18.5 m) of cast film, and old or repainted panels can require extra preparation. The film finish you choose also changes the amount of material and labor needed.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (2 or 4 doors).

Tatra T700 wraps by generation

Swipe sideways. Tap a card for the full description.

Tatra T700, first generation, factory photo
Factory color shown

1996–1999 Tatra T700 sedan (first generation)

1996–1999sedan (2 or 4 doors)196.3 in (4,985 mm) to 202.4 in (5,140 mm)

The Tatra T700 was built from 1996 to 1999 as a full-size sedan with two or four doors, and its paint is now old enough that panels may be original or repainted. On a car of these years a test spot comes before a full wrap to check how the film adheres to the existing finish. If any panel has been repainted, the installer needs to know that before stretching film over it.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Tatra T700

A partial wrap on a Tatra T700 can cover the roof, hood, or mirror caps as separate jobs. Chrome delete on this car covers the window trim and badges with black film, and paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full wrap but still need clean panel edges.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Tatra T700: body, cut-outs and film

The Tatra T700 vinyl wrap follows the car's large sedan shape, with a body that ranges from 196.3 in (4,985 mm) to 202.4 in (5,140 mm) long. This full-size body is available with either two or four doors, and the extra length on some versions increases the amount of film needed compared with a shorter sedan. A wrap on this car is a large, flat-sided project that rewards careful panel-by-panel work.

Tatra T700 wrap ideas start with the trim and badges, which are often removed or masked for a clean color change wrap. The door handles, mirrors, and window trims need cut-outs or come off the car before the film is laid. The long roof and the hood are large single panels that require two people to handle the film without creasing.

If you are counting how much vinyl to wrap a Tatra T700, the one generation is the only body to measure. The sedan's length varies from 196.3 in (4,985 mm) to 202.4 in (5,140 mm), so a longer car needs more film on the roof and lower sides.

Questions about wrapping a Tatra T700

How much vinyl does it take to wrap a Tatra T700?

A Tatra T700 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is for the newest body of the one generation, and a chrome or patterned film would need about 70 ft (21.5 m) instead.

Can I wrap only the hood or the roof of a Tatra T700?

Yes, you can wrap only the hood or the roof of a Tatra T700 as a partial wrap. The roof, hood, and mirror caps are listed as separate partial jobs, and chrome delete can be done on the window trim and badges without wrapping the whole car.

Is a Tatra T700 hard to wrap?

A Tatra T700 is a large full-size sedan, so it adds work simply through its size, with bodies up to 202.4 in (5,140 mm) long. The trim and badges need to be removed or cut around, and old paint may require a test spot before the wrap. These factors make the job longer than a small car but still straightforward for an experienced installer.

How many generations of the Tatra T700 does this page cover?

This page covers one generation of the Tatra T700, built from 1996 to 1999. The page describes the full-size sedan body in both two-door and four-door styles.