Wraps by car

Tatra 80 wrap

A Tatra 80 wrap uses cast vinyl to cover the whole body of this 1931–1935 luxury convertible. The catalog lists one generation, and a full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) film. Plain cast film is the standard choice, while chrome or patterned film needs more material.

1generations18 mof film for a full wrap

Tatra 80, first generation, factory photo
Tatra 80, first generation. Factory color shown.

Tatra 80 wrap colors and ideas

  • Tatra 80 black wrap
  • Tatra 80 white wrap
  • Tatra 80 gray wrap
  • Tatra 80 silver wrap
  • Tatra 80 red wrap
  • Tatra 80 blue wrap
  • Tatra 80 green wrap
  • Tatra 80 yellow wrap
  • Tatra 80 orange wrap
  • Tatra 80 purple wrap
  • Tatra 80 pink wrap
  • Tatra 80 teal wrap
  • Tatra 80 brown wrap
  • Tatra 80 gold wrap
  • Tatra 80 chrome wrap
  • Tatra 80 color shift wrap
  • Tatra 80 carbon fiber wrap
  • Tatra 80 camo and patterned wrap

How much vinyl to wrap a Tatra 80

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1931–1935convertible (2 doors)196.9 in (5,000 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Tatra 80 wrap cost factors

The Tatra 80 wrap cost depends on the film type and the amount of work on this large luxury car. The standard estimate is about 59 ft (18 m) of cast film, but chrome or patterned film brings it to about 69 ft (21 m). The single convertible body style has a fabric top that is not wrapped, which keeps the material use to the lower panels.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Tatra 80 wraps by generation

Swipe sideways. Tap a card for the full description.

Tatra 80, first generation, factory photo
Factory color shown

1931–1935 Tatra 80 convertible (first generation)

1931–1935convertible (2 doors)196.9 in (5,000 mm)

The open top of the first generation Tatra 80 is not wrapped, and the vinyl ends where the fabric roof starts. The car has a fabric top, so the film covers the body up to the top edge. A folding hard top would be wrapped as separate panels, but this model does not have one.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Tatra 80

A partial wrap on a Tatra 80 can cover the hood, mirror caps or rear deck. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Tatra 80: body, cut-outs and film

The Tatra 80 vinyl wrap covers a body that is 196.9 in (5,000 mm) long in its single convertible style. This two-door body has long, flat panels, but the large overall size adds to the amount of film required. The fabric top is not wrapped, so the estimate is for the lower body only.

Tatra 80 wrap ideas often start with the parts that need extra work. Door handles, badges and the windshield frame are removed or wrapped around for a clean finish. The fabric top is left unwrapped, and the film ends where the top begins.

To figure out how much vinyl to wrap a Tatra 80, you need to know its size and panel layout. The first generation is the only one, so there is no difference between generations in film amounts. A full wrap takes about 59 ft (18 m) of standard film, and a chrome or patterned film takes about 69 ft (21 m).

Questions about wrapping a Tatra 80

How much vinyl does it take to wrap a Tatra 80?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap the Tatra 80. If you choose chrome or patterned film, the amount goes up to about 69 ft (21 m). These figures cover the whole body of the convertible, excluding the fabric top.

Is the top of a Tatra 80 wrapped?

No, the top of a Tatra 80 is not wrapped. The car has a fabric top, and the film ends where the top begins. A folding hard top would be wrapped as panels of its own, but this model does not have one.

Can I wrap only the hood or the roof of a Tatra 80?

Yes, you can wrap only the hood, mirror caps or rear deck of a Tatra 80. A partial wrap can also be a chrome delete on the window trim and badges. Paint protection film (PPF) goes on the front end as a clear film.

Is a Tatra 80 hard to wrap?

The Tatra 80 is not especially hard to wrap, but its size and details add work. The body is 196.9 in (5,000 mm) long, which means more film and more handling. The convertible top is not a factor, but door handles and badges should be removed or wrapped around for a clean result.