Wraps by car

Daewoo Prince wrap

The Daewoo Prince wrap page covers the mid-size sedan built from 1991 to 1997. This catalog lists one generation of the Prince with a four-door body. A full vinyl wrap of the Prince takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Daewoo Prince, first generation, factory photo
Daewoo Prince, first generation. Factory color shown.

Daewoo Prince wrap colors and ideas

  • Prince black wrap
  • Prince white wrap
  • Prince gray wrap
  • Prince silver wrap
  • Prince red wrap
  • Prince blue wrap
  • Prince green wrap
  • Prince yellow wrap
  • Prince orange wrap
  • Prince purple wrap
  • Prince pink wrap
  • Prince teal wrap
  • Prince brown wrap
  • Prince gold wrap
  • Prince chrome wrap
  • Prince color shift wrap
  • Prince carbon fiber wrap
  • Prince camo and patterned wrap

How much vinyl to wrap a Daewoo Prince

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1997sedan (4 doors)189.0 in (4,800 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Prince wrap cost factors

Prince wrap cost depends on the size of the car and the film you choose. A full wrap of the 189.0 in (4,800 mm) sedan uses about 52 ft (16 m) of cast film. Chrome or patterned film adds about 14 ft (4 m) over the standard estimate. The cost also depends on the shop's labor for removing parts and working around the recessed areas.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Prince wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Prince, first generation, factory photo
Factory color shown

1991–1997 Prince sedan (first generation)

1991–1997sedan (4 doors)189.0 in (4,800 mm)

The first generation Prince ran from 1991 to 1997 as a four-door sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The painter's tape test will show if the old paint can hold the vinyl without peeling. Installers should check for rust or body filler before quoting the job.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Prince

Partial wrap on a Prince covers the roof, hood, or mirror caps. Prince chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. A partial job uses less film than a full wrap and takes less time to install.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Prince: body, cut-outs and film

A Daewoo Prince vinyl wrap has to follow the sedan's flat sides and long hood. The body is 189.0 in (4,800 mm) long, so a full wrap uses about 52 ft (16 m) of cast film. A wrap on this car needs no extra film for a roof that is not there. The four doors are straightforward to cover with standard vinyl.

Prince wrap ideas start with the parts that need cut-outs or come off. The door handles, mirrors, and badges come off for a clean install. The front and rear bumpers have deep recesses that need stretching and relief cuts. The window trim and grille are good areas for a chrome delete with black film.

If you want to know how much vinyl to wrap a Prince, you have one generation to count. The Prince was built from 1991 to 1997 as a four-door sedan. Some trims may have different bumpers or side moldings that add a little film. The catalog covers the first generation only, so the estimate stays at about 52 ft (16 m).

Questions about wrapping a Daewoo Prince

How much vinyl does it take to wrap a Daewoo Prince?

A full wrap of a Daewoo Prince takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, budget about 66 ft (20 m). These numbers are for the first generation sedan built from 1991 to 1997.

Can I wrap only the hood or the roof of a Prince?

Yes, you can wrap only the hood or the roof of a Prince. Partial wrap covers the roof, hood, or mirror caps. A hood wrap uses far less film than a full wrap and is a good first project.

Is a Prince hard to wrap?

Yes, a Prince can be harder to wrap because of its recessed bumpers. The front and rear bumpers have deep channels that need stretching and relief cuts. Door handles, mirrors, and badges must come off for a clean job. The sedan's long flat panels are easier, but the recessed areas add time.

How many generations of the Prince does this page cover?

This page covers one generation of the Daewoo Prince. That generation was built from 1991 to 1997 as a four-door sedan. The catalog does not list any other generations.