Wraps by car

Daewoo Racer wrap

The Daewoo Racer wrap page covers the first generation of this compact from 1986 to 1994 in its hatchback and sedan forms. A full vinyl wrap of a Racer takes about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan using 60-inch (1.52 m) cast film. With chrome or patterned film the amount can rise to about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Daewoo Racer, first generation, factory photo
Daewoo Racer, first generation. Factory color shown.

Daewoo Racer wrap colors and ideas

  • Racer black wrap
  • Racer white wrap
  • Racer gray wrap
  • Racer silver wrap
  • Racer red wrap
  • Racer blue wrap
  • Racer green wrap
  • Racer yellow wrap
  • Racer orange wrap
  • Racer purple wrap
  • Racer pink wrap
  • Racer teal wrap
  • Racer brown wrap
  • Racer gold wrap
  • Racer chrome wrap
  • Racer color shift wrap
  • Racer carbon fiber wrap
  • Racer camo and patterned wrap

How much vinyl to wrap a Daewoo Racer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1994hatchback, sedan (3 or 4 or 5 doors)163.7 in (4,158 mm) to 176.5 in (4,482 mm)about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Racer wrap cost factors

Racer wrap cost depends mainly on the size of the car and the chosen film. The hatchback is 163.7 in (4,158 mm) long and the sedan can be 176.5 in (4,482 mm), which affects how much 60-inch (1.52 m) cast film is needed, about 48 ft (14.5 m) to 49 ft (15 m). A chrome or patterned film can increase the film amount to 61 ft (18.5 m) and adds labor for pattern matching. The condition of the paint and the number of parts removed, such as door handles and mirrors, also change the final cost.

  • Film for a full wrap: about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: hatchback, sedan (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Racer wraps by generation

Swipe sideways. Tap a card for the full description.

Daewoo Racer, first generation, factory photo
Factory color shown

1986–1994 Racer hatchback, sedan (first generation)

1986–1994hatchback, sedan (3 or 4 or 5 doors)163.7 in (4,158 mm) to 176.5 in (4,482 mm)

The first generation Racer from 1986 to 1994 came in two body styles, a hatchback and a sedan. The hatchback and sedan decide the panel plan, because the hatchback has its rear glass in the tailgate while the sedan has a separate trunk lid. The length ranges from 163.7 in (4,158 mm) to 176.5 in (4,482 mm), and a full wrap takes about 48 ft (14.5 m) to 49 ft (15 m) of 60-inch (1.52 m) cast film. When you count film for this generation, the body style is the main choice.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Racer

A partial wrap on a Racer covers the roof, the hood or the mirror caps without wrapping the whole car. Chrome delete on a Racer means covering the window trim and badges with black film. Paint protection film (PPF) is a clear option for the front end of a Racer to protect the hood and bumper. These smaller jobs use less film than a full wrap and let you change one area of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daewoo Racer: body, cut-outs and film

A Daewoo Racer vinyl wrap follows the body style because the hatchback and sedan have different panel shapes. The hatchback measures 163.7 in (4,158 mm) in length while the sedan can be up to 176.5 in (4,482 mm). The shorter hatchback has a tailgate with the rear glass set into it, which changes how the film is cut around the window. The sedan adds more sheet metal along the rear deck and trunk lid, so the installer uses a slightly larger film amount.

Racer wrap ideas include a full color change or a partial wrap, but the tailgate with its integrated rear glass needs special attention. The film must end at the edge of the glass, so the installer trims carefully rather than wrapping over the window. Door handles, mirrors and badges are removed before the vinyl is applied to keep the edges clean. The hatchback tailgate is one of the parts that comes off the car for a better wrap result.

When you calculate how much vinyl to wrap a Racer, remember that only the first generation is in this catalog. The hatchback and sedan use nearly the same amount of film, about 48 ft (14.5 m) to 49 ft (15 m) in 60-inch (1.52 m) material. A chrome or patterned film may require up to 61 ft (18.5 m) because the pattern must be matched at the seams. The difference between the two body styles is small, so the panel plan matters more than the total length of the car.

Questions about wrapping a Daewoo Racer

How much vinyl does it take to wrap a Daewoo Racer?

A Daewoo Racer takes about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan in 60-inch (1.52 m) cast film, and with chrome or patterned film up to about 61 ft (18.5 m). Those figures come from the film estimate for the newest body in this catalog. The amount depends on the body style and any pattern matching.

Which Racer body takes more film?

The sedan takes more film than the hatchback because it can be longer at 176.5 in (4,482 mm) compared to 163.7 in (4,158 mm). The film estimate is about 49 ft (15 m) for the sedan and 48 ft (14.5 m) for the hatchback in 60-inch (1.52 m) cast film. Those numbers are close, so the panel plan matters more than the total length.

Can I wrap only the hood or the roof of a Racer?

Yes, you can wrap only the hood or the roof of a Racer as a partial wrap. Partial wraps also include mirror caps, and chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear option for the front end.

Is a Racer hard to wrap?

A Racer is not especially hard to wrap, but the hatchback's tailgate with the rear glass adds work because the film must end at the edge of the glass. The car is compact, 163.7 in (4,158 mm) to 176.5 in (4,482 mm) long, so the panels are manageable. The installer removes door handles, mirrors and badges for clean edges, which adds time, but the simple body lines of the Racer keep the job straightforward.