Wraps by car

Daimler Double Six wrap

This page covers the Daimler Double Six wrap, a job for one generation of the long-wheelbase sedan built from 1993 to 1997. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m).

1generations17 mof film for a full wrap

Daimler Double Six, first generation, factory photo
Daimler Double Six, first generation. Factory color shown.

Daimler Double Six wrap colors and ideas

  • Double Six black wrap
  • Double Six white wrap
  • Double Six gray wrap
  • Double Six silver wrap
  • Double Six red wrap
  • Double Six blue wrap
  • Double Six green wrap
  • Double Six yellow wrap
  • Double Six orange wrap
  • Double Six purple wrap
  • Double Six pink wrap
  • Double Six teal wrap
  • Double Six brown wrap
  • Double Six gold wrap
  • Double Six chrome wrap
  • Double Six color shift wrap
  • Double Six carbon fiber wrap
  • Double Six camo and patterned wrap

How much vinyl to wrap a Daimler Double Six

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1997sedan (4 doors)202.8 in (5,150 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Double Six wrap cost factors

Double Six wrap cost is driven by the size of the body and the state of the paint, not by a fixed price tag. A 202.8 in (5,150 mm) sedan needs about 56 ft (17 m) of film for a full color change. Cutting around the chrome window trim, long doors and front bumper adds labor to the job.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Double Six wraps by generation

Swipe sideways. Tap a card for the full description.

Daimler Double Six, first generation, factory photo
Factory color shown

1993–1997 Double Six sedan (first generation)

1993–1997sedan (4 doors)202.8 in (5,150 mm)

The first generation Daimler Double Six is a 1993–1997 sedan with a 202.8 in (5,150 mm) body. On a car of these years the panels may be original or repainted, so a test spot comes before a full wrap. The installer checks adhesion on each panel before laying the full sheets.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Double Six

A partial wrap on a Double Six can cover the roof, hood or mirror caps without the cost or material of a full body wrap. Double Six chrome delete is a separate option that covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end that guards the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daimler Double Six: body, cut-outs and film

The Daimler Double Six vinyl wrap has to cover a 202.8 in (5,150 mm) four-door sedan body. The long roof and tall sides mean you order film in full 60-inch (1.52 m) widths and work panel by panel. The four doors add four deep recesses, each one a separate inlay before the main door sheet goes on.

Double Six wrap ideas start with the front bumper, which needs cut-outs for the grille, lamps and trim. The door handles, side moldings and badges come off so the vinyl can sit flat behind them. The mirror caps are small curved parts that respond well to careful stretching with a heat gun.

How much vinyl to wrap a Double Six depends on which of the catalog bodies you count. The first generation is a 1993–1997 sedan with a 202.8 in (5,150 mm) length and needs about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 70 ft (21.5 m) because the pattern repeat and brightwork trim eat up material.

Questions about wrapping a Daimler Double Six

How much vinyl does it take to wrap a Daimler Double Six?

A full Daimler Double Six wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 70 ft (21.5 m).

Can I wrap only the hood or the roof of a Double Six?

Yes, you can wrap only the hood or the roof of a Double Six. A partial wrap covers the roof, hood or mirror caps without a full body wrap.

Is a Double Six hard to wrap?

A Double Six is more work to wrap than a small car because of its 202.8 in (5,150 mm) length. The long roof, four doors and bright window trim add extra cutting and tucking time.

How many generations of the Double Six does this page cover?

This page covers one generation of the Daimler Double Six, built from 1993 to 1997.