Wraps by car

Daimler DS420 wrap

This page covers the Daimler DS420 wrap and the film a full vinyl wrap takes. The Daimler DS420 was built as one generation from 1968 to 1992. A single body style was offered, a four-door sedan with a length of 226.0 in (5,740 mm). A full wrap of this body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film, or about 82 ft (25 m) for chrome or patterned film.

1generations21.5 mof film for a full wrap

Daimler DS420, first generation, factory photo
Daimler DS420, first generation. Factory color shown.

Daimler DS420 wrap colors and ideas

  • Daimler DS420 black wrap
  • Daimler DS420 white wrap
  • Daimler DS420 gray wrap
  • Daimler DS420 silver wrap
  • Daimler DS420 red wrap
  • Daimler DS420 blue wrap
  • Daimler DS420 green wrap
  • Daimler DS420 yellow wrap
  • Daimler DS420 orange wrap
  • Daimler DS420 purple wrap
  • Daimler DS420 pink wrap
  • Daimler DS420 teal wrap
  • Daimler DS420 brown wrap
  • Daimler DS420 gold wrap
  • Daimler DS420 chrome wrap
  • Daimler DS420 color shift wrap
  • Daimler DS420 carbon fiber wrap
  • Daimler DS420 camo and patterned wrap

How much vinyl to wrap a Daimler DS420

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1992sedan (4 doors)226.0 in (5,740 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Daimler DS420 wrap cost factors

A Daimler DS420 wrap cost depends on the size of the car and the condition of the paint. The sedan is 226.0 in (5,740 mm) long, so a full wrap takes about 70 ft (21.5 m) of cast film, or about 82 ft (25 m) for chrome or patterned film. More cutting around the chrome, lamps, and emblems adds labor time. Paint condition also matters, because old or repainted panels may need extra prep before film goes on.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: sedan (4 doors).

Daimler DS420 wraps by generation

Swipe sideways. Tap a card for the full description.

Daimler DS420, first generation, factory photo
Factory color shown

1968–1992 Daimler DS420 sedan (first generation)

1968–1992sedan (4 doors)226.0 in (5,740 mm)

The first generation Daimler DS420 was built from 1968 to 1992 as a four-door sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A wrap shop will check adhesion on a small area before committing to the whole body. The paint age affects how much preparation each panel needs.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Daimler DS420

Smaller jobs on a Daimler DS420 include a partial wrap of the roof, hood, and mirror caps. A chrome delete on the window trim and badges is a way to change the look without a full color change. For protection, paint protection film (PPF) can be applied as a clear film on the front end. These options use less vinyl than the full wrap estimate of about 70 ft (21.5 m).

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daimler DS420: body, cut-outs and film

A Daimler DS420 vinyl wrap deals with a long sedan body with four doors and a large roof. The sedan shape keeps the main panels open, but the length of 226.0 in (5,740 mm) adds film to the roof, rockers, and lower doors. A color change wrap must cover the deep side panels without relief cuts, so the installer needs a long uninterrupted run of film. The size is best handled with a 60-inch (1.52 m) roll, and the estimate for a full wrap is about 70 ft (21.5 m).

Daimler DS420 wrap ideas start with the bright trim, because this car carries a lot of chrome. A chrome delete covers the window frames, grille, bumpers, and badges with black film. The door handles, mirrors, and trim strips must be removed or cut around carefully. The front and rear lamps and the vinyl roof moldings need cut-outs on every panel.

How much vinyl to wrap a Daimler DS420 depends on the single generation, built from 1968 to 1992. The catalog lists one body for this car, so there is no change in size between generations. The film estimate for the first generation is about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film would take about 82 ft (25 m) for the whole car.

Questions about wrapping a Daimler DS420

How much vinyl does it take to wrap a Daimler DS420?

A Daimler DS420 takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film for a full wrap. The estimate for chrome or patterned film is about 82 ft (25 m). This figure covers the whole sedan body from 1968 to 1992.

Can I wrap only the hood or the roof of a Daimler DS420?

Yes, you can wrap only the hood or the roof of a Daimler DS420. A partial wrap on this car often covers the roof, hood, or mirror caps. A chrome delete on the window trim and badges is another smaller job. Paint protection film (PPF) is also available as a clear film on the front end.

Is a Daimler DS420 hard to wrap?

A Daimler DS420 is hard to wrap because of its size and chrome trim. The sedan is 226.0 in (5,740 mm) long, so a full wrap takes about 70 ft (21.5 m) of 60-inch (1.52 m) film. The bright trim around the windows, grille, and bumpers needs careful cutting or removal. Large flat panels like the doors and roof need a steady hand to avoid wrinkles.

How many generations of the Daimler DS420 does this page cover?

This page covers one generation of the Daimler DS420. The car was built from 1968 to 1992 with a single body style. All versions share the same sedan body and the same film estimate.