Wraps by car

Daimler XJS wrap

This page covers the Daimler XJS, a sports car produced in one generation from 1973 to 1977. A full vinyl wrap of the coupe body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 64 ft (19.5 m).

1generations15.5 mof film for a full wrap

Daimler XJS, first generation, factory photo
Daimler XJS, first generation. Factory color shown.

Daimler XJS wrap colors and ideas

  • Daimler XJS black wrap
  • Daimler XJS white wrap
  • Daimler XJS gray wrap
  • Daimler XJS silver wrap
  • Daimler XJS red wrap
  • Daimler XJS blue wrap
  • Daimler XJS green wrap
  • Daimler XJS yellow wrap
  • Daimler XJS orange wrap
  • Daimler XJS purple wrap
  • Daimler XJS pink wrap
  • Daimler XJS teal wrap
  • Daimler XJS brown wrap
  • Daimler XJS gold wrap
  • Daimler XJS chrome wrap
  • Daimler XJS color shift wrap
  • Daimler XJS carbon fiber wrap
  • Daimler XJS camo and patterned wrap

How much vinyl to wrap a Daimler XJS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1973–1977coupe (2 doors)189.5 in (4,813 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Daimler XJS wrap cost factors

Daimler XJS wrap cost depends on the film type, the size of the car, and the condition of the paint. A standard color change uses about 51 ft (15.5 m) of film, while chrome or patterned film uses about 64 ft (19.5 m). The coupe body is 189.5 in (4,813 mm) long, which adds surface area compared with a smaller car. Paint that is original or repainted may need more preparation before the wrap.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Daimler XJS wraps by generation

Swipe sideways. Tap a card for the full description.

Daimler XJS, first generation, factory photo
Factory color shown

1973–1977 Daimler XJS coupe (first generation)

1973–1977coupe (2 doors)189.5 in (4,813 mm)

The first generation Daimler XJS was built from 1973 to 1977 as a two-door coupe. Paint age matters on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check how the film adheres to the old paint. The long side doors are each one large piece of film, so the installer needs clean, smooth panels.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Daimler XJS

For the Daimler XJS, you can choose a partial wrap instead of a full color change. The roof, hood, and mirror caps are common areas for a partial wrap. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) as a clear film on the front end shields the nose from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daimler XJS: body, cut-outs and film

A Daimler XJS vinyl wrap starts with the coupe body, which measures 189.5 in (4,813 mm) long. The two long side doors are the largest panels on the car. Each door is wrapped as one large piece of film, so the installer needs enough length to work without seams. The simple two-door shape keeps the number of pieces low compared with a four-door sedan.

When you plan Daimler XJS wrap ideas, note that the doors are each one large piece of film. The long doors take a full width of 60-inch film with little waste on the sides. Because the car has only two doors, there are no rear door handles or shut lines to cut around. The wrap film can be laid over the door in a single smooth motion.

The question of how much vinyl to wrap a Daimler XJS has one answer for this page: about 51 ft (15.5 m) of standard cast film. If the film is chrome or patterned, you allow about 64 ft (19.5 m) for pattern matching and trimming. The Daimler XJS was built for only five years, from 1973 to 1977, and this page lists one generation. All coupe bodies share the same length of 189.5 in (4,813 mm).

Questions about wrapping a Daimler XJS

How much vinyl does it take to wrap a Daimler XJS?

A full wrap of the Daimler XJS takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, allow about 64 ft (19.5 m). These figures cover the coupe body from 1973 to 1977.

Can I wrap only the hood or the roof of a Daimler XJS?

Yes, you can wrap only the hood or the roof of a Daimler XJS. A partial wrap often includes the roof, hood, or mirror caps as separate jobs. You can also choose a chrome delete for the window trim and badges, or clear paint protection film on the front end.

Is a Daimler XJS hard to wrap?

The Daimler XJS is not the most difficult car to wrap, but the long doors add work. Each of the two side doors is one large piece of film, and the car measures 189.5 in (4,813 mm) long. The coupe shape keeps the panel count low, but the old paint may need a test spot before the full wrap.

How many generations of the Daimler XJS does this page cover?

This page covers one generation of the Daimler XJS, produced from 1973 to 1977. The catalog lists a single coupe body for those years.