Wraps by car

Daimler SP250 wrap

The Daimler SP250 wrap uses a vinyl wrap tailored to this compact British sports car. One generation of the Daimler SP250 appears in this catalog, built from 1959 to 1964. A full wrap of the first generation body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds up to about 48 ft (14.5 m).

1generations12 mof film for a full wrap

Daimler SP250, first generation, factory photo
Daimler SP250, first generation. Factory color shown.

Daimler SP250 wrap colors and ideas

  • Daimler SP250 black wrap
  • Daimler SP250 white wrap
  • Daimler SP250 gray wrap
  • Daimler SP250 silver wrap
  • Daimler SP250 red wrap
  • Daimler SP250 blue wrap
  • Daimler SP250 green wrap
  • Daimler SP250 yellow wrap
  • Daimler SP250 orange wrap
  • Daimler SP250 purple wrap
  • Daimler SP250 pink wrap
  • Daimler SP250 teal wrap
  • Daimler SP250 brown wrap
  • Daimler SP250 gold wrap
  • Daimler SP250 chrome wrap
  • Daimler SP250 color shift wrap
  • Daimler SP250 carbon fiber wrap
  • Daimler SP250 camo and patterned wrap

How much vinyl to wrap a Daimler SP250

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1959–1964convertible (2 doors)160.5 in (4,077 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Daimler SP250 wrap cost factors

Daimler SP250 wrap cost depends on the amount of film, the number of cut-outs and the time spent on the convertible body. The first generation uses about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome delete adds work on the window trim and badges, which raises the labour part of the cost. Paint protection film on the front end is a separate job with its own film total.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Daimler SP250 wraps by generation

Swipe sideways. Tap a card for the full description.

Daimler SP250, first generation, factory photo
Factory color shown

1959–1964 Daimler SP250 convertible (first generation)

1959–1964convertible (2 doors)160.5 in (4,077 mm)

The first generation Daimler SP250 is a convertible with 2 doors and a length of 160.5 in (4,077 mm). In a wrap the fabric top is not covered with film, and the vinyl ends cleanly where the top begins. When the car has a folding hard top, that hard top is wrapped as panels of its own. The installer plans each panel so the edge against the fabric stays neat and secure.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Daimler SP250

A partial wrap on a Daimler SP250 can cover the hood, mirror caps or rear deck without doing the whole car. Chrome delete on this model means covering the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. Each smaller job uses less film than a full wrap of about 39 ft (12 m).

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daimler SP250: body, cut-outs and film

A Daimler SP250 vinyl wrap covers a convertible body with 2 doors and an overall length of 160.5 in (4,077 mm). The fabric top is not wrapped, so the film ends where the top begins. The small body means fewer panels than a larger classic, but the curved rear deck needs careful film handling. A folding hard top, when fitted, is wrapped as separate panels.

Daimler SP250 wrap ideas often start with the long hood and the rear deck because they are the largest visible surfaces. The fabric convertible top stays unwrapped, and installers cut the film neatly along its edge. For chrome delete, the window trim and badges are covered with black film. On some cars a folding hard top is wrapped as its own set of panels.

How much vinyl to wrap a Daimler SP250 depends on the first generation body, which was in production from 1959 to 1964. One generation means wrap measurements stay the same across all years of this model. The convertible body has 2 doors and a length of 160.5 in (4,077 mm). A full wrap uses about 39 ft (12 m) of 60-inch (1.52 m) cast film, or about 48 ft (14.5 m) for chrome or patterned film.

Questions about wrapping a Daimler SP250

How much vinyl does it take to wrap a Daimler SP250?

About 39 ft (12 m) of 60-inch (1.52 m) cast film wraps a Daimler SP250. For chrome or patterned film the estimate is about 48 ft (14.5 m).

Is the top of a Daimler SP250 wrapped?

No, the top of a Daimler SP250 is not wrapped. The fabric top stays uncovered, and the film ends where it begins. A folding hard top is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Daimler SP250?

Yes, a partial wrap can cover only the hood or other smaller areas of a Daimler SP250. The hood, mirror caps and rear deck are all jobs a wrap shop can do separately.

Is a Daimler SP250 hard to wrap?

The Daimler SP250 adds some work because it is a convertible with a fabric top that must be left uncovered. The installer trims the film along the edge of the top and works around the curved rear deck. Its 160.5 in (4,077 mm) body is small, but a folding hard top means extra wrapped panels.