Wraps by car

Daimler X350 wrap

This page covers a full vinyl wrap on the Daimler X350, the luxury sedan built from 2005 to 2009. It is the only generation of the X350 in this catalog. A full wrap of this body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

1generations19.5 mof film for a full wrap

Daimler X350, first generation, factory photo
Daimler X350, first generation. Factory color shown.

Daimler X350 wrap colors and ideas

  • Daimler X350 black wrap
  • Daimler X350 white wrap
  • Daimler X350 gray wrap
  • Daimler X350 silver wrap
  • Daimler X350 red wrap
  • Daimler X350 blue wrap
  • Daimler X350 green wrap
  • Daimler X350 yellow wrap
  • Daimler X350 orange wrap
  • Daimler X350 purple wrap
  • Daimler X350 pink wrap
  • Daimler X350 teal wrap
  • Daimler X350 brown wrap
  • Daimler X350 gold wrap
  • Daimler X350 chrome wrap
  • Daimler X350 color shift wrap
  • Daimler X350 carbon fiber wrap
  • Daimler X350 camo and patterned wrap

How much vinyl to wrap a Daimler X350

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2009sedan (4 doors)205.3 in (5,215 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Daimler X350 wrap cost factors

A Daimler X350 wrap cost depends on the size of the car and the film you choose. A full wrap needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, so a textured or chrome film adds more material cost than a solid color. The labor time is set by the long four-door body and the number of parts you want removed, like badges and handles. A partial job on only the roof or hood uses less film and is a smaller bill.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).

Daimler X350 wraps by generation

Swipe sideways. Tap a card for the full description.

Daimler X350, first generation, factory photo
Factory color shown

2005–2009 Daimler X350 sedan (first generation)

2005–2009sedan (4 doors)205.3 in (5,215 mm)

The first and only generation of the X350 ran from 2005 to 2009. On a car of these years the paint may be original or repainted, so a test spot comes before a full wrap. If a panel has been repainted, the shop can check adhesion and decide on the right prep. The sedan body is long enough that a two-person install is easier for the roof and rear quarters.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Daimler X350

A partial wrap on a Daimler X350 can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end. These jobs use less material than a full wrap and can be done without removing large body panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daimler X350: body, cut-outs and film

A Daimler X350 vinyl wrap has to cover a four-door sedan body that measures 205.3 in (5,215 mm) long. The simple sedan shape means film can be laid in large sections without many dramatic curves. The long roof, hood and trunk add to the total area but do not require special stretching. Plan for extra material if you choose a patterned film, because aligning the pattern increases waste.

When planning Daimler X350 wrap ideas, expect work around the door handles, badges and lights. The window trim and badges come off for a clean finish and to avoid cut lines on the paint. The bumpers and mirrors are wrapped in place, but you will need to cut around sensors and washer jets. A chrome delete on the bright trim uses narrow strips of black film and takes careful knifeless tape work.

There is only one body shape for the X350, so the amount of vinyl to wrap a Daimler X350 does not change between years. The catalog lists the same sedan from 2005 to 2009 with no long-wheelbase or wagon version. If you are counting film for a used car, check whether any panel has been replaced. A test spot on the paint is wise before you order full rolls, because a repainted panel may need different prep.

Questions about wrapping a Daimler X350

How much vinyl does it take to wrap a Daimler X350?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film to wrap a Daimler X350. If you choose chrome or patterned film, the estimate is about 74 ft (22.5 m) because of pattern alignment and trimming waste. These figures cover the full sedan body of the 2005–2009 X350.

Can I wrap only the hood or the roof of a Daimler X350?

Yes, you can wrap only the hood or the roof of a Daimler X350. A partial wrap can also cover the mirror caps, and a chrome delete covers the window trim and badges. Paint protection film is another smaller job, using clear film on the front end.

Is a Daimler X350 hard to wrap?

A Daimler X350 is not especially hard to wrap, but its size adds work. The body is 205.3 in (5,215 mm) long, so you need a large work area for the roof and side panels. The main labor comes from trimming around door handles, badges, lights and the chrome trim, which is best removed before wrapping.

How many generations of the Daimler X350 does this page cover?

This page covers one generation of the Daimler X350. The catalog lists the first generation only, built from 2005 to 2009. There are no other generations of the X350 in this catalog.