Wraps by car

Daimler XJ40 wrap

This page covers the Daimler XJ40 wrap for the complete first generation sedan built from 1986 to 1994. The Daimler XJ40 was produced in one generation during these years, a single body style with four doors. A full vinyl wrap of the 202.8 in (5,150 mm) sedan takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

1generations17 mof film for a full wrap

Daimler XJ40, first generation, factory photo
Daimler XJ40, first generation. Factory color shown.

Daimler XJ40 wrap colors and ideas

  • Daimler XJ40 black wrap
  • Daimler XJ40 white wrap
  • Daimler XJ40 gray wrap
  • Daimler XJ40 silver wrap
  • Daimler XJ40 red wrap
  • Daimler XJ40 blue wrap
  • Daimler XJ40 green wrap
  • Daimler XJ40 yellow wrap
  • Daimler XJ40 orange wrap
  • Daimler XJ40 purple wrap
  • Daimler XJ40 pink wrap
  • Daimler XJ40 teal wrap
  • Daimler XJ40 brown wrap
  • Daimler XJ40 gold wrap
  • Daimler XJ40 chrome wrap
  • Daimler XJ40 color shift wrap
  • Daimler XJ40 carbon fiber wrap
  • Daimler XJ40 camo and patterned wrap

How much vinyl to wrap a Daimler XJ40

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1994sedan (4 doors)202.8 in (5,150 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Daimler XJ40 wrap cost factors

The Daimler XJ40 wrap cost depends on the area covered, the film type, and the condition of the paint. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, while chrome or patterned film can require about 70 ft (21.5 m). Any rust repair or paint correction before wrapping adds time and material to the job.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Daimler XJ40 wraps by generation

Swipe sideways. Tap a card for the full description.

Daimler XJ40, first generation, factory photo
Factory color shown

1986–1994 Daimler XJ40 sedan (first generation)

1986–1994sedan (4 doors)202.8 in (5,150 mm)

The first generation Daimler XJ40 was produced from 1986 to 1994 as a four-door sedan. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. The installer checks adhesion on each panel because old paint can fail under the film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Daimler XJ40

Some owners choose a partial wrap on the Daimler XJ40 rather than a full color change. A roof, hood, or mirror cap wrap changes the look with less film and less labor. Chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Daimler XJ40: body, cut-outs and film

The Daimler XJ40 vinyl wrap covers a large luxury sedan with a 202.8 in (5,150 mm) body length. The single body style has four doors and a fixed roof, so the film needs long continuous panels on the sides. The hood and trunk lid are also large and use a good part of the film estimate.

Daimler XJ40 wrap ideas usually include the long side moldings and the distinctive grille surround. The door handles, mirrors, and the chrome trim along the belt line need cut-outs or are removed for a clean installation. The wrap also has to be trimmed carefully around the headlights and tail lights.

For how much vinyl to wrap a Daimler XJ40, the first generation is the only body this page covers. The estimate of about 56 ft (17 m) of 60-inch (1.52 m) cast film assumes a full color change wrap on a sedan. If you use chrome or patterned film, plan for about 70 ft (21.5 m) to allow pattern matching.

Questions about wrapping a Daimler XJ40

How much vinyl does it take to wrap a Daimler XJ40?

A full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, based on the 202.8 in (5,150 mm) sedan body. If you choose chrome or patterned film, plan for about 70 ft (21.5 m) to allow extra for matching. The estimate covers all painted panels and the door jambs are not wrapped.

Can I wrap only the hood or the roof of a Daimler XJ40?

Yes, you can wrap only the hood or the roof of a Daimler XJ40 as a partial wrap. You can also wrap the mirror caps, or do a chrome delete on the window trim and badges. These smaller jobs use less film and are often done to change the look without a full wrap.

Is a Daimler XJ40 hard to wrap?

The Daimler XJ40 is a large sedan, so a full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) film and long working time. The long hood and roof need wide, uninterrupted panels, and the recessed door handles and chrome trim add cut-out work. The age of these cars also means paint condition must be tested before wrapping.

How many generations of the Daimler XJ40 does this page cover?

This page covers one generation of the Daimler XJ40, the first generation built from 1986 to 1994. It was the only generation of this model, and it came as a four-door sedan. The film estimate for a full wrap is about 56 ft (17 m) of 60-inch (1.52 m) cast film.