Wraps by car

FAW Bestune M9 wrap

The FAW Bestune M9 wrap is a large vinyl wrap project for this single-generation van body. The catalog covers one generation, produced from 2023 to now, and lists a wrap estimate for the newest body. A full wrap of the FAW Bestune M9 takes about 80 ft (24.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 92 ft (28 m).

1generations24.5 mof film for a full wrap

FAW Bestune M9, first generation, factory photo
FAW Bestune M9, first generation. Factory color shown.

FAW Bestune M9 wrap colors and ideas

  • Bestune M9 black wrap
  • Bestune M9 white wrap
  • Bestune M9 gray wrap
  • Bestune M9 silver wrap
  • Bestune M9 red wrap
  • Bestune M9 blue wrap
  • Bestune M9 green wrap
  • Bestune M9 yellow wrap
  • Bestune M9 orange wrap
  • Bestune M9 purple wrap
  • Bestune M9 pink wrap
  • Bestune M9 teal wrap
  • Bestune M9 brown wrap
  • Bestune M9 gold wrap
  • Bestune M9 chrome wrap
  • Bestune M9 color shift wrap
  • Bestune M9 carbon fiber wrap
  • Bestune M9 camo and patterned wrap

How much vinyl to wrap an FAW Bestune M9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowvan (5 doors)207.9 in (5,280 mm)about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m)

Bestune M9 wrap cost factors

Bestune M9 wrap cost depends on the amount of film and the labor hours for this large van. A full wrap uses about 80 ft (24.5 m) of cast film, and a chrome or patterned film job uses about 92 ft (28 m). The tall body of 78.9 in (2,005 mm) and the long 207.9 in (5,280 mm) panels add time to the install. The sliding door tracks also require careful trimming, which affects the work involved.

  • Film for a full wrap: about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (78.9 in (2,005 mm)): the roof is wrapped from a platform.

Bestune M9 wraps by generation

Swipe sideways. Tap a card for the full description.

FAW Bestune M9, first generation, factory photo
Factory color shown

2023–now Bestune M9 van (first generation)

2023–nowvan (5 doors)207.9 in (5,280 mm)

The first generation FAW Bestune M9, made from 2023 to now, has sliding side doors that shape the wrap process. The door tracks stay bare, so the film is cut along them and the tracks remain free for the doors to slide. This design choice gives the installer a clear line for the film edge. The rest of the body follows the long, tall van panels.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (78.9 in (2,005 mm)): the roof is wrapped from a platform.

Film: about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).

Roof, hood, chrome delete and PPF on a Bestune M9

A partial wrap on the FAW Bestune M9 can cover the roof, hood, or mirror caps without doing the full body. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is clear film placed on the front end to guard against stone chips. These smaller jobs use less film and leave the sliding door tracks untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW Bestune M9: body, cut-outs and film

The FAW Bestune M9 vinyl wrap covers a long, tall 5-door van body. The van measures 207.9 in (5,280 mm) long and 78.9 in (2,005 mm) tall, so installers work with large film panels. The sliding side doors are wrapped up to their tracks, which stay bare to keep the doors moving freely. A roof wrap on this tall body is worked from a platform.

Bestune M9 wrap ideas start with the cut lines that the sliding side door tracks impose. The film is cut along the tracks, and the tracks themselves are left uncovered. The tall body means the roof is wrapped from a platform, so the installer has safe access to the top panel. Bright trim and badges can be covered with black film for a chrome delete.

If you are counting film, the FAW Bestune M9 has one generation, so the numbers stay the same. The full body needs about 80 ft (24.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 12 ft (3.5 m) for a total of about 92 ft (28 m). The single production generation means no panel changes affect the estimate.

Questions about wrapping an FAW Bestune M9

How much vinyl does it take to wrap an FAW Bestune M9?

It takes about 80 ft (24.5 m) of 60-inch (1.52 m) cast film to wrap an FAW Bestune M9. If the wrap uses chrome or patterned film, the amount goes up to about 92 ft (28 m). These figures are for the newest body of this single-generation van.

Are the sliding doors of a Bestune M9 wrapped?

The sliding doors of a Bestune M9 are wrapped, but the tracks are left bare. The film is cut along the tracks so the doors can slide without interference. The tracks themselves stay uncovered to keep the mechanism working correctly.

Can I wrap only the hood or the roof of a Bestune M9?

Yes, you can wrap only the hood or the roof of a Bestune M9. A partial wrap can cover the roof, hood, or mirror caps. This lets you change the look of one area without wrapping the full van.

Is a Bestune M9 hard to wrap?

A Bestune M9 is a demanding wrap because of its size and sliding doors. The van is 207.9 in (5,280 mm) long and 78.9 in (2,005 mm) tall, so installers handle very large panels. The roof is worked from a platform, and the sliding door tracks need precise cutting. These factors add time and care to the job.