Wraps by car

FAW Jinn wrap

The FAW Jinn wrap page covers this mini hatchback from 2005 to 2009, one generation in total. A full vinyl wrap of the five-door body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 4 ft (1.5 m) to that estimate.

1generations14.5 mof film for a full wrap

FAW Jinn, first generation, factory photo
FAW Jinn, first generation. Factory color shown.

FAW Jinn wrap colors and ideas

  • Jinn black wrap
  • Jinn white wrap
  • Jinn gray wrap
  • Jinn silver wrap
  • Jinn red wrap
  • Jinn blue wrap
  • Jinn green wrap
  • Jinn yellow wrap
  • Jinn orange wrap
  • Jinn purple wrap
  • Jinn pink wrap
  • Jinn teal wrap
  • Jinn brown wrap
  • Jinn gold wrap
  • Jinn chrome wrap
  • Jinn color shift wrap
  • Jinn carbon fiber wrap
  • Jinn camo and patterned wrap

How much vinyl to wrap an FAW Jinn

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2009hatchback (5 doors)133.7 in (3,395 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Jinn wrap cost factors

The Jinn wrap cost depends on film choice, labor, and the condition of a car from 2005 to 2009. A standard color change uses about 48 ft (14.5 m) of 60-inch film, while chrome or patterned film takes about 52 ft (16 m). Cut-outs for fog lamps or extra prep on old paint also add workshop time.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Jinn wraps by generation

Swipe sideways. Tap a card for the full description.

FAW Jinn, first generation, factory photo
Factory color shown

2005–2009 Jinn hatchback (first generation)

2005–2009hatchback (5 doors)133.7 in (3,395 mm)

The first generation FAW Jinn from 2005 to 2009 may have original or repainted panels after this long on the road. A test spot on the paint before a full wrap shows whether the film will bond cleanly. If the paint is tired, a good detail and primer work prevent lifting at the edges.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Jinn

A partial wrap on the FAW Jinn can be the roof, the hood, or the mirror caps for a quick color change. Jinn chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film, a clear film on the front end, is another option for a smaller job.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW Jinn: body, cut-outs and film

The FAW Jinn vinyl wrap starts with a compact hatchback body that is 133.7 in (3,395 mm) long. Five doors add more seams and edges than a three-door, but the small panels keep material use low. A shop can usually lay film on the roof and hood with less stretching than on larger cars.

Jinn wrap ideas should account for the tailgate, which carries the rear glass and means film stops at the glass edge. Some trims have fog lamps in the front bumper, so the installer cuts openings in the bumper film. Door handles, mirrors, and badges are removed or cut out for a clean finish.

How much vinyl to wrap a Jinn is stable because the model had one generation from 2005 to 2009. The five-door hatchback shape and the listed length of 133.7 in (3,395 mm) did not change. An estimator can use the same figures for any Jinn of these years when quoting film.

Questions about wrapping an FAW Jinn

How much vinyl does it take to wrap an FAW Jinn?

A full wrap of an FAW Jinn takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 52 ft (16 m) because of pattern matching and extra trim. These figures come from the single generation of this five-door hatchback.

Can I wrap only the hood or the roof of a Jinn?

Yes, you can wrap only the hood or the roof of a Jinn. The partial jobs on this page include roof, hood, mirror caps, chrome delete, and paint protection film. Each one uses less film and less labor than a full color change.

Is a Jinn hard to wrap?

A Jinn is not especially hard to wrap, but the tailgate with the rear glass needs precise cutting at the edge. Some trims have fog lamps in the front bumper, so the film needs cut-outs there. The small size keeps panel work manageable for an experienced installer.

How many generations of the Jinn does this page cover?

This page covers one generation of the FAW Jinn, produced from 2005 to 2009. There is no second generation in the catalog, so every estimate on this page refers to that five-door hatchback.