Wraps by car

FAW Besturn X80 wrap

The FAW Besturn X80 wrap guide covers the first-generation SUV produced from 2014 to now. A vinyl wrap for this model requires about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film choices need roughly 69 ft (21 m) for full coverage.

1generations18.5 mof film for a full wrap

FAW Besturn X80, first generation, factory photo
FAW Besturn X80, first generation. Factory color shown.

FAW Besturn X80 wrap colors and ideas

  • Besturn X80 black wrap
  • Besturn X80 white wrap
  • Besturn X80 gray wrap
  • Besturn X80 silver wrap
  • Besturn X80 red wrap
  • Besturn X80 blue wrap
  • Besturn X80 green wrap
  • Besturn X80 yellow wrap
  • Besturn X80 orange wrap
  • Besturn X80 purple wrap
  • Besturn X80 pink wrap
  • Besturn X80 teal wrap
  • Besturn X80 brown wrap
  • Besturn X80 gold wrap
  • Besturn X80 chrome wrap
  • Besturn X80 color shift wrap
  • Besturn X80 carbon fiber wrap
  • Besturn X80 camo and patterned wrap

How much vinyl to wrap an FAW Besturn X80

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowSUV (5 doors)180.6 in (4,586 mm) to 181.9 in (4,620 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Besturn X80 wrap cost factors

The Besturn X80 wrap cost changes with the film type, the amount of surface area and the labor for disassembly. Chrome or patterned film uses about 69 ft (21 m) instead of 61 ft (18.5 m) for standard cast film. Removing roof rails and cutting around sensors or fog lamps adds time to the job. A color change wrap on the whole body costs more in labor than a partial wrap on just the roof or hood.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Besturn X80 wraps by generation

Swipe sideways. Tap a card for the full description.

FAW Besturn X80, first generation, factory photo
Factory color shown

2014–now Besturn X80 SUV (first generation)

2014–nowSUV (5 doors)180.6 in (4,586 mm) to 181.9 in (4,620 mm)

The first-generation FAW Besturn X80 ran from 2014 onward with a restyling in 2016. Bumpers and lights changed at the restyling, so film cut for one version does not fit the other. The body length changed from 180.6 in (4,586 mm) to 181.9 in (4,620 mm) after the update. Every trim of this generation has roof rails that must be removed or cut around for a full roof wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Besturn X80

A partial wrap on the FAW Besturn X80 can cover just the roof, hood or mirror caps. A Besturn X80 chrome delete involves wrapping the window trim and badges with black film. Paint protection film in clear is an option for the front end to guard against stone chips. These jobs use less film than a full wrap and still change the look of the SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW Besturn X80: body, cut-outs and film

The FAW Besturn X80 vinyl wrap suits a five-door SUV body measuring between 180.6 in (4,586 mm) and 181.9 in (4,620 mm) long. The length varies slightly because the bumpers were reshaped after the 2016 restyling. The large side panels and tall tailgate use most of the film on this vehicle. A wrap installer works panel by panel across the body to keep the film smooth.

Besturn X80 wrap ideas include handling the tailgate carefully because the rear glass is set into it. The film ends at the edge of that glass instead of wrapping over it. Roof rails come off before the roof is wrapped on every trim, or the film is cut along them. Some trims have a sunroof, front fog lamps and rear parking sensors that need precise cut-outs in the film.

How much vinyl to wrap a Besturn X80 depends on the generation, but only one generation exists in this catalog. The 2016 restyling changed bumpers and lights, so film cut for pre-2016 models does not fit later ones. The same body length range applies to all years from 2014 onward. Installers measure each car before cutting because the bumper shape affects the total film needed.

Questions about wrapping an FAW Besturn X80

How much vinyl does it take to wrap an FAW Besturn X80?

Yes, a full wrap on an FAW Besturn X80 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount rises to about 69 ft (21 m). These figures are for the newest body style of the first generation.

Can the roof of a Besturn X80 be wrapped?

Yes, the roof of a Besturn X80 can be wrapped, but the roof rails must be removed first or the film cut along them. Some trims also have a sunroof that requires the film to be cut around its opening. A roof wrap is a partial job that uses less film than a full wrap.

Which years of the Besturn X80 take the same film cuts?

The Besturn X80 has only one generation from 2014 to now, with a restyling in 2016. Bumpers and lights changed at the restyling, so film cuts from before 2016 do not fit later models. For years after 2016, the film cuts are the same within that updated version.

Can I wrap only the hood or the roof of a Besturn X80?

Yes, you can wrap only the hood or the roof of a Besturn X80 as a partial wrap. The mirror caps are another small area that can be covered. Chrome delete on the window trim and badges is a separate partial job from a full body wrap.