Wraps by car

FAW V2 wrap

The FAW V2 wrap page covers the single generation of this subcompact hatchback, produced from 2012 to 2015. A full vinyl wrap of the newest body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 57 ft (17.5 m).

1generations15 mof film for a full wrap

FAW V2, first generation, factory photo
FAW V2, first generation. Factory color shown.

FAW V2 wrap colors and ideas

  • FAW V2 black wrap
  • FAW V2 white wrap
  • FAW V2 gray wrap
  • FAW V2 silver wrap
  • FAW V2 red wrap
  • FAW V2 blue wrap
  • FAW V2 green wrap
  • FAW V2 yellow wrap
  • FAW V2 orange wrap
  • FAW V2 purple wrap
  • FAW V2 pink wrap
  • FAW V2 teal wrap
  • FAW V2 brown wrap
  • FAW V2 gold wrap
  • FAW V2 chrome wrap
  • FAW V2 color shift wrap
  • FAW V2 carbon fiber wrap
  • FAW V2 camo and patterned wrap

How much vinyl to wrap an FAW V2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2015hatchback (5 doors)148.0 in (3,760 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

FAW V2 wrap cost factors

The FAW V2 wrap cost depends on the size of the car, the film type, and the amount of disassembly. This subcompact hatchback uses about 49 ft (15 m) of standard cast film for a full wrap. Extra work on the tailgate glass edge and fog lamp cut-outs can add labor time.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

FAW V2 wraps by generation

Swipe sideways. Tap a card for the full description.

FAW V2, first generation, factory photo
Factory color shown

2012–2015 FAW V2 hatchback (first generation)

2012–2015hatchback (5 doors)148.0 in (3,760 mm)

The first generation FAW V2 was built from 2012 to 2015 and has a five-door hatchback body. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The tailgate glass and fog lamps are the main areas that need attention during installation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an FAW V2

The FAW V2 chrome delete covers window trim and badges with black film for a different look. A partial wrap on this car typically includes the roof, hood, or mirror caps. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW V2: body, cut-outs and film

The FAW V2 vinyl wrap covers a five-door hatchback with a body length of 148.0 in (3,760 mm). This subcompact size keeps film use moderate, with most of the surface on the roof, hood, and large side panels. The five-door layout means extra cuts around each door handle and the tailgate.

FAW V2 wrap ideas include planning for a tailgate that has the rear glass in it, so the film ends at the edge of the glass. Every trim has fog lamps in the front bumper, which need cut-outs in the bumper film. These areas require careful trimming for a clean finish.

How much vinyl to wrap an FAW V2 depends on the generation, and this page covers only the first generation from 2012 to 2015. The full wrap film estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film. A chrome or patterned film increases the requirement to about 57 ft (17.5 m).

Questions about wrapping an FAW V2

How much vinyl does it take to wrap an FAW V2?

A full wrap of an FAW V2 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the amount rises to about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an FAW V2?

Yes, you can wrap only the hood or the roof of an FAW V2. A partial wrap often covers the roof, hood, or mirror caps as separate jobs.

Is an FAW V2 hard to wrap?

The FAW V2 is not especially hard to wrap, but it has details that add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has fog lamps in the front bumper that need cut-outs in the film.

How many generations of the FAW V2 does this page cover?

This page covers one generation of the FAW V2, built from 2012 to 2015.