Wraps by car

FAW Bestune T55 wrap

The FAW Bestune T55 wrap page covers the first-generation SUV produced from 2021 onward. A full vinyl wrap of this five-door body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 67 ft (20.5 m). The page details panel work, partial jobs, and the film a wrap of this car needs.

1generations18.5 mof film for a full wrap

FAW Bestune T55, first generation, factory photo
FAW Bestune T55, first generation. Factory color shown.

FAW Bestune T55 wrap colors and ideas

  • Bestune T55 black wrap
  • Bestune T55 white wrap
  • Bestune T55 gray wrap
  • Bestune T55 silver wrap
  • Bestune T55 red wrap
  • Bestune T55 blue wrap
  • Bestune T55 green wrap
  • Bestune T55 yellow wrap
  • Bestune T55 orange wrap
  • Bestune T55 purple wrap
  • Bestune T55 pink wrap
  • Bestune T55 teal wrap
  • Bestune T55 brown wrap
  • Bestune T55 gold wrap
  • Bestune T55 chrome wrap
  • Bestune T55 color shift wrap
  • Bestune T55 carbon fiber wrap
  • Bestune T55 camo and patterned wrap

How much vinyl to wrap an FAW Bestune T55

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)174.7 in (4,437 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Bestune T55 wrap cost factors

The Bestune T55 wrap cost depends mainly on the size of the vehicle and the film you choose. This SUV is 174.7 in (4,437 mm) long, so a full wrap needs about 61 ft (18.5 m) of 60-inch (1.52 m) material. Chrome or patterned film raises the amount to about 67 ft (20.5 m) and increases the labor for trimming and alignment. The condition of the paint and whether you include door jambs also affects the final work.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Bestune T55 wraps by generation

Swipe sideways. Tap a card for the full description.

FAW Bestune T55, first generation, factory photo
Factory color shown

2021–now Bestune T55 SUV (first generation)

2021–nowSUV (5 doors)174.7 in (4,437 mm)

The first-generation FAW Bestune T55 has a five-door SUV body that is 174.7 in (4,437 mm) long. Its size puts a full wrap at about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or 67 ft (20.5 m) for chrome or patterned film. The number of panels is standard for a compact SUV, with the tailgate and rear glass counted as one large piece. The film ends at the edge of the rear glass, so the installer must cut precisely around that opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Bestune T55

A partial wrap on the Bestune T55 can cover the roof, hood, or mirror caps without wrapping the whole body. Chrome delete replaces bright window trim and badges with black film for a different look. Paint protection film (PPF) as a clear layer on the front end guards against stone chips. These smaller jobs use less film than a full wrap and focus on the areas that get the most attention.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW Bestune T55: body, cut-outs and film

The FAW Bestune T55 vinyl wrap follows the lines of a five-door SUV that is 174.7 in (4,437 mm) long. That length and the tall body mean a full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The number of panels is typical for an SUV of this size, with the tailgate and rear glass handled as one piece. The film ends at the edge of the rear glass, which keeps the cut line clean.

Bestune T55 wrap ideas often start with the tailgate, where the rear glass is set into the panel. The film stops at the edge of that glass, so the installer trims carefully around the opening. Door handles, mirrors, and badges can be removed for a smoother finish. The front and rear bumpers are wrapped in sections because of their deep curves.

How much vinyl to wrap a Bestune T55 depends on the production year, but all T55s share the same body style and length. From 2021 to the present, the SUV has kept the five-door shape, so the panel count does not change. The only difference for film planning is whether you choose standard cast film or chrome and patterned film. A chrome or patterned wrap uses about 67 ft (20.5 m) instead of the usual 61 ft (18.5 m).

Questions about wrapping an FAW Bestune T55

How much vinyl does it take to wrap an FAW Bestune T55?

A full wrap of an FAW Bestune T55 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the amount rises to about 67 ft (20.5 m). These figures are for the first-generation body produced from 2021 onward.

Can I wrap only the hood or the roof of a Bestune T55?

Yes, you can wrap only the hood or the roof of a Bestune T55. A partial wrap on this SUV often covers just the roof, hood, or mirror caps. Chrome delete on the window trim and badges is another smaller job. Paint protection film (PPF) on the front end is also done without wrapping the whole vehicle.

Is a Bestune T55 hard to wrap?

A Bestune T55 is not hard to wrap, but the tailgate adds work. The rear glass is set into the tailgate, so the film must end at the edge of the glass. At 174.7 in (4,437 mm) long, the SUV is a mid-size job that uses about 61 ft (18.5 m) of film. The deep bumper curves also need careful stretching and trimming.

How many generations of the Bestune T55 does this page cover?

This page covers one generation of the Bestune T55, the first generation produced from 2021 to the present. The model has not changed its body style in that time, so the wrap data applies to all T55s in this period.