Wraps by car

FAW Besturn B70 wrap

The FAW Besturn B70 wrap page covers all three generations of this mid-size car. A vinyl wrap changes the color or finish of the body without painting it. The newest body from 2020 onward uses about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. The first and second generations take slightly different amounts because their bodies have four-door sedan shapes.

3generations17 mof film for a full wrap

FAW Besturn B70, third generation, factory photo
FAW Besturn B70, third generation. Factory color shown.

FAW Besturn B70 wrap colors and ideas

  • Besturn B70 black wrap
  • Besturn B70 white wrap
  • Besturn B70 gray wrap
  • Besturn B70 silver wrap
  • Besturn B70 red wrap
  • Besturn B70 blue wrap
  • Besturn B70 green wrap
  • Besturn B70 yellow wrap
  • Besturn B70 orange wrap
  • Besturn B70 purple wrap
  • Besturn B70 pink wrap
  • Besturn B70 teal wrap
  • Besturn B70 brown wrap
  • Besturn B70 gold wrap
  • Besturn B70 chrome wrap
  • Besturn B70 color shift wrap
  • Besturn B70 carbon fiber wrap
  • Besturn B70 camo and patterned wrap

How much vinyl to wrap an FAW Besturn B70

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowliftback (5 doors)189.4 in (4,810 mm) to 191.1 in (4,855 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2015–2020sedan (4 doors)189.0 in (4,800 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2006–2015sedan (4 doors)186.2 in (4,729 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Besturn B70 wrap cost factors

Besturn B70 wrap cost depends on the generation, the film you pick, and the condition of the paint. The third generation liftback is a mid-size car with a tailgate, so it uses about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation on every trim has bright moldings, parking sensors, and fog lamps, which add cut-outs and chrome delete work. A full wrap on the second generation uses about 59 ft (18 m) of film, and a patterned or chrome film raises the amount to about 69 ft (21 m).

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Besturn B70 wraps by generation

Swipe sideways. Tap a card for the full description.

FAW Besturn B70, third generation, factory photo
Factory color shown

2020–now Besturn B70 liftback (third generation)

2020–nowliftback (5 doors)189.4 in (4,810 mm) to 191.1 in (4,855 mm)

The third generation FAW Besturn B70 was restyled in 2023. Bumpers and lights changed, so film cut for one version does not fit the other. This liftback uses about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. If you have a 2020–2022 car and later need a panel wrapped again, the template for the 2023–now version will not match.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

FAW Besturn B70, second generation, factory photo
Factory color shown

2015–2020 Besturn B70 sedan (second generation)

2015–2020sedan (4 doors)189.0 in (4,800 mm)

The second generation FAW Besturn B70 is a four-door sedan built from 2015 to 2020. It is 189.0 in (4,800 mm) long, which is close to the first generation but with a different trunk shape. A full wrap on this body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, more than the newer liftback because the sedan has more separate panels.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

FAW Besturn B70, first generation, factory photo
Factory color shown

2006–2015 Besturn B70 sedan (first generation)

2006–2015sedan (4 doors)186.2 in (4,729 mm)

The first generation FAW Besturn B70 was built from 2006 to 2015. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. Every trim of this generation has bright moldings, parking sensors, and fog lamps, so the installer cuts the film around each sensor and lamp.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Besturn B70

An FAW Besturn B70 can get a partial wrap on the roof, hood, or mirror caps. A chrome delete covers the bright window trim and badges with black film, which is useful on the first generation with its bright moldings on every trim. Paint protection film (PPF) is a clear film applied to the front end to shield the bumper, hood, and fenders from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW Besturn B70: body, cut-outs and film

An FAW Besturn B70 vinyl wrap fits the body styles of the car across its three generations. The third generation is a five-door liftback with a tailgate that includes the rear glass, so the film ends at the edge of the glass. The first and second generations are four-door sedans with a separate trunk lid, which gives the installer a clear break line at the trunk opening. The third generation measures 189.4 in (4,810 mm) to 191.1 in (4,855 mm) long, while the earlier cars are close in size at 189.0 in (4,800 mm) and 186.2 in (4,729 mm).

Besturn B70 wrap ideas for the third generation often start with the tailgate. The rear glass is set into the tailgate, so a wrap on that panel must stop at the edge of the glass. On the second generation the trunk lid, roof, and hood are the panels that get a color change or a protective film. The first generation has bright decorative moldings on every trim, and a chrome delete covers them with black film so they match a darker wrap.

How much vinyl to wrap a Besturn B70 depends on which generation you have. The 2020 and newer liftback uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, and a chrome or patterned film adds waste so the total is about 70 ft (21.5 m). The 2015–2020 sedan needs about 59 ft (18 m) of cast film, or about 69 ft (21 m) with chrome or patterned film. The 2006–2015 sedan takes about 57 ft (17.5 m) of cast film, or about 67 ft (20.5 m) for chrome or patterned film.

Questions about wrapping an FAW Besturn B70

How much vinyl does it take to wrap an FAW Besturn B70?

Yes, a full wrap on the newest FAW Besturn B70 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the total is about 70 ft (21.5 m) because of the extra waste from matching patterns.

Which years of the Besturn B70 take the same film cuts?

The same film cuts fit the third generation from 2020 to 2022, and then from 2023 onward. In 2023 the bumpers and lights changed, so film cut for the earlier third-generation car does not fit the restyled one. The first and second generations have their own body shapes and do not share cuts with the third generation.

Can I wrap only the hood or the roof of a Besturn B70?

Yes, you can wrap only the hood or the roof of a Besturn B70. A partial wrap on the roof, hood, or mirror caps is a smaller job than a full wrap. The first generation also has chrome delete as an option for the bright moldings on every trim.

Is a Besturn B70 hard to wrap?

A Besturn B70 is not hard to wrap, but the first generation adds work with its bright moldings, parking sensors, and fog lamps. The third generation liftback has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The second generation is a straightforward four-door sedan with no special cut-outs.