Wraps by car

FAW V5 wrap

The FAW V5 wrap page covers the first generation subcompact sedan produced from 2012 to 2017. A full vinyl wrap of this body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The page lists one generation in the catalog.

1generations16 mof film for a full wrap

FAW V5, first generation, factory photo
FAW V5, first generation. Factory color shown.

FAW V5 wrap colors and ideas

  • FAW V5 black wrap
  • FAW V5 white wrap
  • FAW V5 gray wrap
  • FAW V5 silver wrap
  • FAW V5 red wrap
  • FAW V5 blue wrap
  • FAW V5 green wrap
  • FAW V5 yellow wrap
  • FAW V5 orange wrap
  • FAW V5 purple wrap
  • FAW V5 pink wrap
  • FAW V5 teal wrap
  • FAW V5 brown wrap
  • FAW V5 gold wrap
  • FAW V5 chrome wrap
  • FAW V5 color shift wrap
  • FAW V5 carbon fiber wrap
  • FAW V5 camo and patterned wrap

How much vinyl to wrap an FAW V5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2017sedan (4 doors)167.1 in (4,245 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

FAW V5 wrap cost factors

An FAW V5 wrap cost depends on the film area, the film type and the extra cut-outs. The small sedan needs about 52 ft (16 m) of film for a full color change, and chrome or patterned film adds about 9 ft (2.5 m) more. Labor rises with fog lamp cut-outs, parking sensor cut-outs on some trims and any chrome delete work.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

FAW V5 wraps by generation

Swipe sideways. Tap a card for the full description.

FAW V5, first generation, factory photo
Factory color shown

2012–2017 FAW V5 sedan (first generation)

2012–2017sedan (4 doors)167.1 in (4,245 mm)

The first generation FAW V5 is the only body this page covers. Paint age on a car of these years may be original or repainted, so a test spot comes before a full wrap. The sedan from 2012 to 2017 has the same shape and size across its run.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an FAW V5

An FAW V5 chrome delete covers window trim, decorative moldings and badges with black film. A partial wrap can cover the roof, hood or mirror caps instead of the whole car. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an FAW V5: body, cut-outs and film

The FAW V5 is a subcompact sedan with four doors and a length of 167.1 in (4,245 mm). Its small size and simple body shape keep a full FAW V5 vinyl wrap manageable for one installer. The single body style means film estimates stay consistent across the production run.

Some FAW V5 wrap ideas need extra cutting time. Every trim has fog lamps in the front bumper, so the bumper film gets cut-outs around each lamp. Some trims have bright decorative moldings that stay bright next to the film unless a chrome delete covers them. Some trims also have parking sensors in the bumpers, and the film is cut around each sensor.

How much vinyl to wrap an FAW V5 stays the same through the only generation. Because the car was built from 2012 to 2017 as one body, the film estimate does not change with production years. A full wrap needs about 52 ft (16 m) of 60-inch (1.52 m) film, while chrome or patterned film takes about 61 ft (18.5 m).

Questions about wrapping an FAW V5

How much vinyl does it take to wrap an FAW V5?

A full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for the FAW V5. Chrome or patterned film needs about 61 ft (18.5 m) because of extra material for overlaps and pattern matching.

Can I wrap only the hood or the roof of an FAW V5?

Yes, you can wrap only the hood or the roof of an FAW V5. A partial wrap also covers mirror caps, and a chrome delete covers window trim, decorative moldings and badges. Paint protection film is another smaller job for the front end.

Is an FAW V5 hard to wrap?

The FAW V5 is not a hard car to wrap, but a few details add work. The small sedan size keeps the job quick, while fog lamps need cut-outs in the bumper film. Some trims add parking sensor cut-outs, and bright moldings on some trims need chrome delete if you want them covered.

How many generations of the FAW V5 does this page cover?

This page covers one generation of the FAW V5, produced from 2012 to 2017. The catalog lists a single body style for this model.