Wraps by car

Hyundai Creta Grand wrap

A Hyundai Creta Grand wrap changes the look of this compact SUV with a full vinyl wrap. The catalog covers one generation, the second, produced from 2021 onward. A complete wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Hyundai Creta Grand, second generation, factory photo
Hyundai Creta Grand, second generation. Factory color shown.

Hyundai Creta Grand wrap colors and ideas

  • Creta Grand black wrap
  • Creta Grand white wrap
  • Creta Grand gray wrap
  • Creta Grand silver wrap
  • Creta Grand red wrap
  • Creta Grand blue wrap
  • Creta Grand green wrap
  • Creta Grand yellow wrap
  • Creta Grand orange wrap
  • Creta Grand purple wrap
  • Creta Grand pink wrap
  • Creta Grand teal wrap
  • Creta Grand brown wrap
  • Creta Grand gold wrap
  • Creta Grand chrome wrap
  • Creta Grand color shift wrap
  • Creta Grand carbon fiber wrap
  • Creta Grand camo and patterned wrap

How much vinyl to wrap a Hyundai Creta Grand

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)177.2 in (4,500 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Creta Grand wrap cost factors

Creta Grand wrap cost depends on the size of the vehicle and the film chosen. The car is 177.2 in (4,500 mm) long, so a full wrap requires about 59 ft (18 m) of 60-inch (1.52 m) cast film. A chrome or patterned film increases the film amount to about 67 ft (20.5 m), and paint protection film adds material cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Creta Grand wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Creta Grand, second generation, factory photo
Factory color shown

2021–now Creta Grand SUV (second generation)

2021–nowSUV (5 doors)177.2 in (4,500 mm)

The second-generation Hyundai Creta Grand is a five-door SUV with a length of 177.2 in (4,500 mm). Its size means a full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. The hood, roof, doors, fenders, and tailgate are separate panels that are straightforward to wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Creta Grand

Creta Grand chrome delete covers the window trim and badges with black film, while a partial wrap can be done on the roof, hood, or mirror caps. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be completed faster.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Creta Grand: body, cut-outs and film

A Hyundai Creta Grand vinyl wrap for this five-door SUV involves covering many medium-sized panels. The body is 177.2 in (4,500 mm) long, which makes the hood, roof, doors, fenders, and tailgate straightforward to wrap. The number of panels is typical for a modern compact SUV, so a full wrap is a balanced job.

Creta Grand wrap ideas start with removing badges and door handles for a clean finish. The tailgate includes the rear glass in its panel, so the film ends at the edge of the glass. Cut-outs are needed for lights, cameras, and sensors, and the mirror caps come off for neat wrapping.

To calculate how much vinyl to wrap a Creta Grand, you can use the same panel count for all years of this generation. The body dimensions are unchanged from 2021 onward, so the film estimate stays the same. Only the styling of trim pieces may differ, but those do not affect the total film needed.

Questions about wrapping a Hyundai Creta Grand

How much vinyl does it take to wrap a Hyundai Creta Grand?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Hyundai Creta Grand. For chrome or patterned film, the amount increases to about 67 ft (20.5 m). These figures are for the newest body of this generation.

Can I wrap only the hood or the roof of a Creta Grand?

Yes, you can wrap only the hood or the roof of a Creta Grand. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete covers window trim and badges. These jobs use less film than a full wrap.

Is a Creta Grand hard to wrap?

A Creta Grand is not hard to wrap, but the tailgate adds a little work because the rear glass is part of the panel. The film must end exactly at the edge of the glass, which requires careful trimming. The rest of the body is straightforward for an experienced installer.

How many generations of the Creta Grand does this page cover?

This page covers one generation of the Creta Grand. The second generation, produced from 2021 onward, is the only generation in the catalog. Its body dimensions and film estimate are the same for all years.