Wraps by car

Hyundai Kona EV wrap

A Hyundai Kona EV wrap covers the whole body with a vinyl wrap in one piece per panel. This page covers two generations of the electric SUV and the film a full wrap of the newest body takes. The second generation needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The first generation from 2018 to 2023 is also detailed below.

2generations18 mof film for a full wrap

Hyundai Kona EV, second generation, factory photo
Hyundai Kona EV, second generation. Factory color shown.

Hyundai Kona EV wrap colors and ideas

  • Kona EV black wrap
  • Kona EV white wrap
  • Kona EV gray wrap
  • Kona EV silver wrap
  • Kona EV red wrap
  • Kona EV blue wrap
  • Kona EV green wrap
  • Kona EV yellow wrap
  • Kona EV orange wrap
  • Kona EV purple wrap
  • Kona EV pink wrap
  • Kona EV teal wrap
  • Kona EV brown wrap
  • Kona EV gold wrap
  • Kona EV chrome wrap
  • Kona EV color shift wrap
  • Kona EV carbon fiber wrap
  • Kona EV camo and patterned wrap

How much vinyl to wrap a Hyundai Kona EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)170.7 in (4,335 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2018–2023SUV (5 doors)165.6 in (4,205 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Kona EV wrap cost factors

A Kona EV wrap cost depends on the size of the car, the film type and the labor for the details. The second generation needs about 59 ft (18 m) of film and the first generation about 54 ft (16.5 m). Chrome or patterned film adds about 7 ft (2 m) of material on both bodies. The wrap also includes cutting around sensors and cameras on the bumpers.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Kona EV wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Kona EV, second generation, factory photo
Factory color shown

2023–now Kona EV SUV (second generation)

2023–nowSUV (5 doors)170.7 in (4,335 mm)

The second generation Hyundai Kona EV has a five-door SUV body that is 170.7 in (4,335 mm) long. A full wrap needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The size means nearly every panel is a manageable single piece for one installer. The tailgate and the doors are the largest pieces on the car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Hyundai Kona EV, first generation, factory photo
Factory color shown

2018–2023 Kona EV SUV (first generation)

2018–2023SUV (5 doors)165.6 in (4,205 mm)

The first generation Hyundai Kona EV was restyled in 2020 with new bumpers and lights. The body is 165.6 in (4,205 mm) long and a full wrap takes about 54 ft (16.5 m) of film. Film cut for one version of this generation does not fit the other because the panels are shaped differently. The restyling did not change the overall length of the car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Kona EV

A partial wrap on a Kona EV covers the roof, hood or mirror caps instead of the whole body. A Kona EV chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips. These smaller jobs use much less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Kona EV: body, cut-outs and film

A Hyundai Kona EV vinyl wrap is planned around the SUV five-door body and the length of the car. The second generation is 170.7 in (4,335 mm) long and uses about 59 ft (18 m) of film. The first generation is 165.6 in (4,205 mm) long and uses about 54 ft (16.5 m) of film. Every panel is wrapped separately, so the five-door layout adds two extra doors compared with a three-door car.

Kona EV wrap ideas include cutting around the cameras and parking sensors that sit in the bumpers. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own. Some trims of the first generation have parking sensors, while every trim of the second generation has them.

How much vinyl to wrap a Kona EV changes between the two generations because the bodies are not the same size. The second generation is longer at 170.7 in (4,335 mm) and needs about 59 ft (18 m) of film. The first generation is 165.6 in (4,205 mm) and needs about 54 ft (16.5 m) of film. The film estimate also rises when you choose chrome or patterned film instead of a plain color.

Questions about wrapping a Hyundai Kona EV

How much vinyl does it take to wrap a Hyundai Kona EV?

A full wrap of a Hyundai Kona EV needs about 59 ft (18 m) of 60-inch (1.52 m) cast film for the newest body. The first generation uses about 54 ft (16.5 m) of the same film. Chrome or patterned film adds about 7 ft (2 m) to either amount.

Can I wrap only the hood or the roof of a Kona EV?

Yes, you can wrap only the hood or the roof of a Kona EV as a partial wrap. A partial wrap can also cover the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film is a clear option for the front end.

Is a Kona EV hard to wrap?

A Kona EV is not hard to wrap for an installer who knows the car, but it has more cut-outs than a simple hatchback. Every trim has cameras in the body, and the second generation has parking sensors in the bumpers on every trim. The charge port door must be wrapped as a separate small piece. The tailgate with the rear glass also needs the film to end at the glass edge.

How many generations of the Kona EV does this page cover?

This page covers two generations of the Kona EV. The first generation was produced from 2018 to 2023 and the second generation from 2023 to now. Each generation has its own body dimensions and wrap film amounts.