Wraps by car

Hyundai i20 N wrap

The Hyundai i20 N wrap page covers the first generation of this subcompact hot hatch built from 2020 onward. A full vinyl wrap of the newest body uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The same car needs roughly 62 ft (19 m) if the wrap uses chrome or patterned film.

1generations14.5 mof film for a full wrap

Hyundai i20 N, first generation, factory photo
Hyundai i20 N, first generation. Factory color shown.

Hyundai i20 N wrap colors and ideas

  • i20 N black wrap
  • i20 N white wrap
  • i20 N gray wrap
  • i20 N silver wrap
  • i20 N red wrap
  • i20 N blue wrap
  • i20 N green wrap
  • i20 N yellow wrap
  • i20 N orange wrap
  • i20 N purple wrap
  • i20 N pink wrap
  • i20 N teal wrap
  • i20 N brown wrap
  • i20 N gold wrap
  • i20 N chrome wrap
  • i20 N color shift wrap
  • i20 N carbon fiber wrap
  • i20 N camo and patterned wrap

How much vinyl to wrap a Hyundai i20 N

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowhatchback (4 or 5 doors)160.4 in (4,075 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

i20 N wrap cost factors

The i20 N wrap cost depends on how much film the car needs, how many panels are wrapped, and how much disassembly the job requires. A full wrap of this 160.4 in (4,075 mm) hatchback uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or about 62 ft (19 m) for chrome or patterned film. The cost rises when the wrap covers extra parts like the roof, mirror caps, or window trim. Cutting around the parking sensors and cameras adds labor, which also changes the final cost.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

i20 N wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai i20 N, first generation, factory photo
Factory color shown

2020–now i20 N hatchback (first generation)

2020–nowhatchback (4 or 5 doors)160.4 in (4,075 mm)

The first generation Hyundai i20 N started in 2020 and is still in production, sold as a hatchback with four or five doors. The 2024 restyling changed the front and rear bumpers and the lights. A wrap kit cut for a 2020–2023 i20 N does not fit the restyled 2024 car. The body length stays at 160.4 in (4,075 mm), so the difference is in the cut patterns, not the roll size.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an i20 N

A partial wrap on a Hyundai i20 N can cover just the roof, the hood, or the mirror caps. An i20 N chrome delete covers the window trim and badges with black film instead of the bright finish. Paint protection film (PPF) is a clear film applied to the front end to guard the bumper, hood, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai i20 N: body, cut-outs and film

A Hyundai i20 N vinyl wrap follows the lines of a short hatchback with four or five doors. The body is 160.4 in (4,075 mm) long, so a full wrap stays manageable on one roll of cast film. Every extra door adds cut lines and edges that a wrap installer has to tuck and trim.

Good i20 N wrap ideas work around the tailgate glass, the parking sensors, and the camera lenses. The tailgate has the rear glass set into it, so the film must end cleanly at the edge of the glass. Every trim of the i20 N has parking sensors in the bumpers, and the film is cut around each sensor. Every trim also has cameras in the body, and the film is cut around each lens.

To work out how much vinyl to wrap an i20 N, start with the body length and the generation you have. The first generation runs from 2020 to now, with a restyling in 2024 that changed the bumpers and lights. Film cut for the earlier 2020–2023 bumpers does not fit the post-2024 restyled car. Length stays the same, so the base film quantity changes only with the film type.

Questions about wrapping a Hyundai i20 N

How much vinyl does it take to wrap a Hyundai i20 N?

A full wrap of a Hyundai i20 N takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl film. This figure is for the newest first-generation body after the 2024 restyling. If you choose chrome or patterned film, plan on about 62 ft (19 m) of the same 60-inch roll.

Which years of the i20 N take the same film cuts?

The Hyundai i20 N has one generation from 2020 to now, so all years share the same basic body, but the 2024 restyling means the same film cuts do not fit every year. Cars built from 2020 to 2023 share one set of cut patterns. Cars from 2024 onward have new bumpers and lights, so they need their own film templates.

Can I wrap only the hood or the roof of an i20 N?

Yes, you can wrap only the hood or the roof of a Hyundai i20 N. A partial wrap often covers the roof, the hood, or the mirror caps on this car. The same job can include a chrome delete on the window trim and badges, or a clear paint protection film on the front end.

Is an i20 N hard to wrap?

An i20 N is not the hardest car to wrap, but it has details that add work to the job. The tailgate has the rear glass set into it, so the film must end neatly at the edge of the glass. Every trim has parking sensors in the bumpers and cameras in the body, and the film has to be cut around each of them. The car is 160.4 in (4,075 mm) long, which is a small body, but the cut-outs take time to do well.