Wraps by car

Hyundai Stargazer wrap

The Hyundai Stargazer wrap page covers the first generation built from 2022 to now, with a single van body style. This five-door van measures 175.6 in (4,460 mm) in length. A full vinyl wrap of the Stargazer uses about 66 ft (20 m) of 60-inch (1.52 m) cast film.

1generations20 mof film for a full wrap

Hyundai Stargazer, first generation, factory photo
Hyundai Stargazer, first generation. Factory color shown.

Hyundai Stargazer wrap colors and ideas

  • Stargazer black wrap
  • Stargazer white wrap
  • Stargazer gray wrap
  • Stargazer silver wrap
  • Stargazer red wrap
  • Stargazer blue wrap
  • Stargazer green wrap
  • Stargazer yellow wrap
  • Stargazer orange wrap
  • Stargazer purple wrap
  • Stargazer pink wrap
  • Stargazer teal wrap
  • Stargazer brown wrap
  • Stargazer gold wrap
  • Stargazer chrome wrap
  • Stargazer color shift wrap
  • Stargazer carbon fiber wrap
  • Stargazer camo and patterned wrap

How much vinyl to wrap a Hyundai Stargazer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowvan (5 doors)175.6 in (4,460 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Stargazer wrap cost factors

Stargazer wrap cost depends on the size of the vehicle and the film chosen. The van is 175.6 in (4,460 mm) long, so a full wrap uses about 66 ft (20 m) of standard cast film. Choosing chrome or patterned film raises the material amount to about 76 ft (23 m). The sliding doors add labor because the film must be cut along the tracks, and the badges and trims require extra time.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Stargazer wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Stargazer, first generation, factory photo
Factory color shown

2022–now Stargazer van (first generation)

2022–nowvan (5 doors)175.6 in (4,460 mm)

The first generation Hyundai Stargazer wraps with the same plan since its 2022 introduction. The sliding rear doors define the wrap: the door tracks stay bare, and the film is cut along them. This cut line is a visible seam, so installers align the film pattern to follow the track neatly. For a van of this generation, nothing else on the body changes the wrap approach.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Stargazer

Partial wrap jobs on a Stargazer include the roof, hood, and mirror caps in a contrasting color. A Stargazer chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done with the same materials.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Stargazer: body, cut-outs and film

A Hyundai Stargazer vinyl wrap is planned around its one body style and length of 175.6 in (4,460 mm). The five-door van shape has large flat side panels that make film application straightforward. Sliding side doors mean the wrap is cut along the door tracks, which remain bare. The roof and hood are uncomplicated surfaces, so the main work is on the tall sides and rear hatch.

Stargazer wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The front and rear bumpers, mirrors, and door handles are removed or loosened for a clean edge. The badges are taken off and replaced, and the window trims are wrapped separately for a color change. A chrome delete on the window trim and badges is a practical option for this van.

How much vinyl to wrap a Stargazer depends on the film type, not on different generations. The first generation runs from 2022 to now, and its body has not changed in that time. The same film estimate applies to every Stargazer built so far: about 66 ft (20 m) of standard cast film. For chrome or patterned film, the estimate is about 76 ft (23 m).

Questions about wrapping a Hyundai Stargazer

How much vinyl does it take to wrap a Hyundai Stargazer?

A full Hyundai Stargazer wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate rises to about 76 ft (23 m). These figures assume the first generation body, which is the only one available.

Are the sliding doors of a Stargazer wrapped?

The sliding doors of a Stargazer are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can still slide without rubbing. This creates a clean line that follows the track's path.

Can I wrap only the hood or the roof of a Stargazer?

Yes, you can wrap only the hood or the roof of a Stargazer. A partial wrap can cover the roof, hood, and mirror caps as separate jobs. These small areas use less film and are a way to add contrast without a full wrap.

Is a Stargazer hard to wrap?

A Stargazer is not hard to wrap, but the sliding doors add work. The film must be cut along the door tracks, which stay bare, and that requires careful trimming. The van's length of 175.6 in (4,460 mm) means large panels, but the flat surfaces make application manageable.