Wraps by car

Hyundai Palisade wrap

The Hyundai Palisade wrap page covers both generations of this large SUV and the vinyl wrap a full exterior takes. The newest body is the second generation, produced from 2025 onward, while the first generation has been built since 2018. A full wrap of the second-generation Palisade uses about 67 feet (20.5 meters) of 60-inch (1.52 meter) cast film.

2generations20.5 mof film for a full wrap

Hyundai Palisade, second generation, factory photo
Hyundai Palisade, second generation. Factory color shown.

Hyundai Palisade wrap colors and ideas

  • Palisade black wrap
  • Palisade white wrap
  • Palisade gray wrap
  • Palisade silver wrap
  • Palisade red wrap
  • Palisade blue wrap
  • Palisade green wrap
  • Palisade yellow wrap
  • Palisade orange wrap
  • Palisade purple wrap
  • Palisade pink wrap
  • Palisade teal wrap
  • Palisade brown wrap
  • Palisade gold wrap
  • Palisade chrome wrap
  • Palisade color shift wrap
  • Palisade carbon fiber wrap
  • Palisade camo and patterned wrap

How much vinyl to wrap a Hyundai Palisade

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)199.2 in (5,060 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
2018–nowSUV (5 doors)196.1 in (4,980 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Palisade wrap cost factors

Palisade wrap cost depends on the size of the body, the film chosen, and the labor for the tall roof. The second generation is 199.2 in (5,060 mm) long and the first is 196.1 in (4,980 mm), so film use differs. Chrome or patterned film raises the amount of film to about 85 ft (26 m) on the second generation and 66 ft (20 m) on the first. The roof is wrapped from a platform on both generations, which adds time.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Palisade wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Palisade, second generation, factory photo
Factory color shown

2025–now Palisade SUV (second generation)

2025–nowSUV (5 doors)199.2 in (5,060 mm)

The second-generation Hyundai Palisade is a tall SUV at 69.5 in (1,765 mm), so the roof is wrapped from a platform. Reaching the roof takes more time and care than on a lower vehicle. A full wrap of this body uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Hyundai Palisade, first generation, factory photo
Factory color shown

2018–now Palisade SUV (first generation)

2018–nowSUV (5 doors)196.1 in (4,980 mm)

The first-generation Hyundai Palisade has a panoramic glass roof on every trim, and the glass is not wrapped. The roof stays dark whatever the color of the film, because the film ends at the roof rails. Every trim also has a sunroof, and the roof film is cut around its opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Palisade

A Palisade chrome delete covers the window trim and badges with black film, and a partial wrap can cover the roof, hood, or mirror caps. Paint protection film (PPF) is an option as a clear film on the front end. These smaller jobs use less film than a full wrap and can be done without wrapping the tall roof.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Palisade: body, cut-outs and film

A Hyundai Palisade vinyl wrap covers a tall, long SUV body, so it takes more film than a smaller crossover. Both generations are five-door SUVs, and the second generation is 199.2 inches (5,060 mm) long. The first generation is shorter at 196.1 inches (4,980 mm), but both stand near 69 inches tall. The size means a full wrap is a two-person job and the roof is reached from a platform.

Palisade wrap ideas must allow for a tailgate with the rear glass in it, so the film ends at the edge of the glass. Every trim has parking sensors in the bumpers, and the film is cut around each sensor. On the first generation, every trim also has cameras in the body, and the film is cut around each lens. The first generation has a panoramic glass roof or a sunroof on every trim, and glass is not wrapped.

How much vinyl to wrap a Palisade depends on the generation, because the two bodies are not the same size. The second generation needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The first generation needs about 57 ft (17.5 m) of the same film, because it is shorter. A restyle in 2022 did not change the first generation's length or film estimate.

Questions about wrapping a Hyundai Palisade

How much vinyl does it take to wrap a Hyundai Palisade?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap a second-generation Hyundai Palisade. The first generation uses about 57 ft (17.5 m) of the same film. Chrome or patterned film increases the amount to about 85 ft (26 m) for the second generation.

Can I wrap only the hood or the roof of a Palisade?

Yes, you can wrap only the hood or the roof of a Palisade. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete is also available for the window trim and badges.

Is a Palisade hard to wrap?

A Palisade is not especially hard to wrap, but its size and features add work. The body is tall, so the roof is wrapped from a platform. Every trim has parking sensors in the bumpers, and the first generation has cameras in the body, so the film is cut around each sensor and lens.

How many generations of the Palisade does this page cover?

This page covers two generations of the Hyundai Palisade. The second generation is produced from 2025 onward, and the first generation has been produced since 2018. The first generation was restyled in 2022 but remains the same body.