Wraps by car

Hyundai Creta wrap

This page covers the Hyundai Creta wrap across two generations. The newest Creta body measures 169.3 in (4,300 mm) long and is a subcompact SUV. A full vinyl wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 66 ft (20 m) to the job.

2generations17.5 mof film for a full wrap

Hyundai Creta, second generation, factory photo
Hyundai Creta, second generation. Factory color shown.

Hyundai Creta wrap colors and ideas

  • Creta black wrap
  • Creta white wrap
  • Creta gray wrap
  • Creta silver wrap
  • Creta red wrap
  • Creta blue wrap
  • Creta green wrap
  • Creta yellow wrap
  • Creta orange wrap
  • Creta purple wrap
  • Creta pink wrap
  • Creta teal wrap
  • Creta brown wrap
  • Creta gold wrap
  • Creta chrome wrap
  • Creta color shift wrap
  • Creta carbon fiber wrap
  • Creta camo and patterned wrap

How much vinyl to wrap a Hyundai Creta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)169.3 in (4,300 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2015–nowSUV (5 doors)168.1 in (4,270 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Creta wrap cost factors

Creta wrap cost depends on film type, finish, and the amount of labor on the body. A full wrap of the second generation takes about 57 ft (17.5 m) of cast film, or about 66 ft (20 m) for chrome or patterned film. Cut-outs for sensors, cameras, and fog lamps add time and labor. Removing roof rails on some trims also changes the work needed.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Creta wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Creta, second generation, factory photo
Factory color shown

2020–now Creta SUV (second generation)

2020–nowSUV (5 doors)169.3 in (4,300 mm)

The second generation Hyundai Creta is a subcompact SUV with five doors and a tailgate. Its 169.3 in (4,300 mm) length means a full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The tall roof and flat sides keep the wrap straightforward. The tailgate includes the rear glass, so the film ends at its edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Hyundai Creta, first generation, factory photo
Factory color shown

2015–now Creta SUV (first generation)

2015–nowSUV (5 doors)168.1 in (4,270 mm)

The first generation Hyundai Creta body covers production from 2015 to now. Because it overlaps with the second generation from 2020 on, owners of cars from those years should check which body they have. The first generation is 168.1 in (4,270 mm) long and takes the same film amount as the newer body. A restyled version appeared in 2020 with updated bumpers that may add cut-outs.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Creta

A partial wrap on a Creta can cover the roof, hood, or mirror caps. Creta chrome delete turns the window trim and badges black with vinyl film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Creta: body, cut-outs and film

The Hyundai Creta vinyl wrap covers a five-door SUV body with a tailgate and separate hood. Its compact size splits into 11 to 13 panels that one installer can handle. The tailgate carries the rear glass, so the film ends neatly at the glass edge. A flat roof and tall doors keep waste low, while the 169.3 in (4,300 mm) length makes panel sizes easy to manage.

Creta wrap ideas start with the tailgate, where the film stops at the edge of the rear glass. Door handles, badges, and the front grille come off for clean edges and fewer seams. On some trims, roof rails are removed before wrapping the roof or the film is cut along them. Parking sensors, cameras, and fog lamps need cut-outs in the bumper and body film.

How much vinyl to wrap a Creta depends on which generation you own. Both generations estimate about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a standard color wrap. Chrome or patterned film needs about 66 ft (20 m) because of pattern matching. The second generation is 1.2 in (30 mm) longer, but the panel count stays the same.

Questions about wrapping a Hyundai Creta

How much vinyl does it take to wrap a Hyundai Creta?

A full wrap of a Hyundai Creta takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m) because of pattern alignment. These figures apply to the current second generation body.

Can I wrap only the hood or the roof of a Creta?

Yes, you can wrap only the hood or the roof of a Creta. Many owners choose a partial wrap that covers the roof, hood, or mirror caps. Chrome delete on the window trim and badges is another smaller option. Paint protection film on the front end is also a partial job.

Is a Creta hard to wrap?

A Hyundai Creta is not a hard car to wrap, but some details add work. The tailgate film ends at the edge of the rear glass, which requires a precise cut. Some trims have roof rails, parking sensors, cameras, and fog lamps that need removal or cut-outs. The body is a manageable subcompact size at 169.3 in (4,300 mm) long.

How many generations of the Creta does this page cover?

This page covers two generations of the Hyundai Creta. The first generation began in 2015, and the second generation in 2020. Both are five-door subcompact SUVs with similar film needs.