Wraps by car

Hyundai Veloster wrap

The Hyundai Veloster wrap page covers both generations of the Veloster, the first from 2011 to 2018 and the second from 2018 onward. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 64 ft (19.5 m) for the same coverage. The car is a four-door hatchback with a tailgate that includes the rear glass.

2generations15 mof film for a full wrap

Hyundai Veloster, second generation, factory photo
Hyundai Veloster, second generation. Factory color shown.

Hyundai Veloster wrap colors and ideas

  • Veloster black wrap
  • Veloster white wrap
  • Veloster gray wrap
  • Veloster silver wrap
  • Veloster red wrap
  • Veloster blue wrap
  • Veloster green wrap
  • Veloster yellow wrap
  • Veloster orange wrap
  • Veloster purple wrap
  • Veloster pink wrap
  • Veloster teal wrap
  • Veloster brown wrap
  • Veloster gold wrap
  • Veloster chrome wrap
  • Veloster color shift wrap
  • Veloster carbon fiber wrap
  • Veloster camo and patterned wrap

How much vinyl to wrap a Hyundai Veloster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowhatchback (4 doors)166.9 in (4,240 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2011–2018hatchback (4 doors)166.1 in (4,220 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Veloster wrap cost factors

Veloster wrap cost depends on the amount of film, the film type, and the labor for cut-outs. The car's size and body style call for about 49 ft (15 m) of 60-inch (1.52 m) cast film for a standard color, or about 64 ft (19.5 m) for chrome or patterned film. Every trim has fog lamps that need cut-outs, and some first-generation trims add parking sensors or cameras. The final quote varies with the installer's labor rate and any surface preparation the paint requires.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Veloster wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Veloster, second generation, factory photo
Factory color shown

2018–now Veloster hatchback (second generation)

2018–nowhatchback (4 doors)166.9 in (4,240 mm)

The second generation Veloster is a four-door hatchback with a body length of 166.9 in (4,240 mm). The single tailgate includes the rear glass, so the film ends at the glass edge on that panel. Every trim has fog lamps in the front bumper, requiring cut-outs in the bumper film. The number of panels is typical for a compact hatchback, with no separate trunk.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Hyundai Veloster, first generation, factory photo
Factory color shown

2011–2018 Veloster hatchback (first generation)

2011–2018hatchback (4 doors)166.1 in (4,220 mm)

On a first generation Veloster from 2011 to 2018, paint condition is a key factor before wrapping. Some panels may have been repainted, and old paint can fail under new film. A test spot on an inconspicuous area shows how the paint reacts to the adhesive. The installer should inspect for chips, scratches, or clear coat failure before quoting a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Veloster

A Veloster chrome delete covers the window trim and badges with black film instead of bright trim. Partial wrap jobs include the roof, hood, and mirror caps. Paint protection film (PPF) is a clear film applied to the front end for rock chip protection. These smaller jobs use less film and can be done without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Veloster: body, cut-outs and film

A Hyundai Veloster vinyl wrap starts with a compact hatchback body 166.9 in (4,240 mm) long on the second generation. The four-door layout means separate panels for the doors, fenders, bumpers, hood, roof, and tailgate. The tailgate includes the rear glass, so the film ends at the edge of the glass. This body style has no separate trunk lid, which simplifies the rear section.

Veloster wrap ideas must account for the fog lamps in the front bumper on every trim. The installer cuts the film around each fog lamp opening. On some first-generation trims, a panoramic glass roof is not wrapped, and the film ends at the roof rails. Parking sensors and cameras on some trims require cut-outs around each sensor and lens.

How much vinyl to wrap a Veloster depends on the generation and the film type. Both generations measure within 0.8 in (20 mm) of each other: 166.9 in (4,240 mm) for the second and 166.1 in (4,220 mm) for the first. The film estimate is the same: about 49 ft (15 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film needs about 64 ft (19.5 m) because of pattern matching and waste.

Questions about wrapping a Hyundai Veloster

How much vinyl does it take to wrap a Hyundai Veloster?

A full wrap of a Hyundai Veloster takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 64 ft (19.5 m) due to extra waste. The estimate is the same for both generations, as the lengths differ by only 0.8 in (20 mm). Actual usage depends on panel layout and installer technique.

Can I wrap only the hood or the roof of a Veloster?

Yes, you can wrap only the hood or the roof of a Veloster. The partial wrap options for this car include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges. Paint protection film (PPF) is another partial option, a clear film on the front end.

Is a Veloster hard to wrap?

The Veloster is not the easiest car to wrap because of its unique details. Every trim has fog lamps in the front bumper that need cut-outs. Some trims have parking sensors, cameras, or a panoramic glass roof that must be cut around or taped off. The tailgate glass is part of the hatch, so the film edge must align with the glass.

How many generations of the Veloster does this page cover?

This page covers two generations of the Hyundai Veloster. The first generation is from 2011 to 2018, with a restyle in 2015. The second generation is from 2018 onward. Both are four-door hatchbacks with similar dimensions.