Wraps by car

Isuzu 117 wrap

This page covers the Isuzu 117 wrap and what a vinyl wrap involves for this classic Japanese sports car. The Isuzu 117 was built in one generation from 1968 to 1981, with a coupe body and two doors. A full wrap of a 1968–1981 Isuzu 117 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 52 ft (16 m).

1generations14 mof film for a full wrap

Isuzu 117, first generation, factory photo
Isuzu 117, first generation. Factory color shown.

Isuzu 117 wrap colors and ideas

  • Isuzu 117 black wrap
  • Isuzu 117 white wrap
  • Isuzu 117 gray wrap
  • Isuzu 117 silver wrap
  • Isuzu 117 red wrap
  • Isuzu 117 blue wrap
  • Isuzu 117 green wrap
  • Isuzu 117 yellow wrap
  • Isuzu 117 orange wrap
  • Isuzu 117 purple wrap
  • Isuzu 117 pink wrap
  • Isuzu 117 teal wrap
  • Isuzu 117 brown wrap
  • Isuzu 117 gold wrap
  • Isuzu 117 chrome wrap
  • Isuzu 117 color shift wrap
  • Isuzu 117 carbon fiber wrap
  • Isuzu 117 camo and patterned wrap

How much vinyl to wrap an Isuzu 117

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1981coupe (2 doors)168.5 in (4,280 mm) to 170.1 in (4,320 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Isuzu 117 wrap cost factors

The Isuzu 117 wrap cost depends on film choice, shop labor, and the condition of the body. A full wrap uses about 46 ft (14 m) of 60-inch (1.52 m) cast film, while chrome or patterned film pushes that to about 52 ft (16 m). The two long doors each take one large piece of film, but the restyling after 1977 means the installer must match the right bumper and light cut patterns. Rust repair or paint correction before wrapping adds to the total job.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Restyled in 1977: bumpers and lights differ between the versions, and so do the film cuts.

Isuzu 117 wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu 117, first generation, factory photo
Factory color shown

1968–1981 Isuzu 117 coupe (first generation)

1968–1981coupe (2 doors)168.5 in (4,280 mm) to 170.1 in (4,320 mm)

The first generation Isuzu 117 was built from 1968 to 1981 and was restyled in 1977. The 1977 restyling changed the bumpers and lights, so film cut for one version does not fit the other. For a coupe in this generation, a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The side doors are long, and each is covered with one large piece of film.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on an Isuzu 117

A partial wrap on an Isuzu 117 can cover the roof, hood, or mirror caps without changing the whole car. An Isuzu 117 chrome delete covers the window trim and badges with black film, and it suits the two-door coupe body. Paint protection film (PPF) is a clear film applied to the front end, useful on a car from 1968–1981. These smaller jobs use far less film than the 46 ft (14 m) needed for a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu 117: body, cut-outs and film

An Isuzu 117 vinyl wrap is a precise job on a compact two-door coupe. The car is 168.5 in (4,280 mm) to 170.1 in (4,320 mm) long, so a full wrap needs about 46 ft (14 m) of film. The long side doors are each one large piece of film, which simplifies the main panels. The coupe shape has clean lines but the wrap still demands careful trimming around the rear glass and door edges.

Isuzu 117 wrap ideas start with the two long side doors that each require one large piece of film. The doors are the largest panels, and installing them without wrinkles takes patience. The door handles and mirrors must be removed or cut around, and the bumpers and window trim need precise trimming. The chrome trim around the windows is a common area for a chrome delete.

To figure how much vinyl to wrap an Isuzu 117, note that the car was built from 1968 to 1981 but restyled in 1977. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. Measuring the exact year of the car is essential before ordering film. The film estimate stays about 46 ft (14 m) for standard cast film on any of these body versions.

Questions about wrapping an Isuzu 117

How much vinyl does it take to wrap an Isuzu 117?

A full vinyl wrap on an Isuzu 117 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the total is about 52 ft (16 m) because of extra overlaps and pattern matching. The car's two long doors each require one large piece of film, but waste is inevitable on the curved coupe body.

Which years of the Isuzu 117 take the same film cuts?

The Isuzu 117 was built from 1968 to 1981, but only cars from the same side of the 1977 restyling share the same film cuts. The 1977 restyling changed the bumpers and lights, so a template for a 1975 car will not fit a 1978 car. For accurate cuts, identify the exact production year before ordering or cutting film.

Can I wrap only the hood or the roof of an Isuzu 117?

Yes, you can wrap only the hood or the roof of an Isuzu 117 as a partial wrap. The roof and hood are separate panels, and the mirror caps can be wrapped as a small accent. A partial wrap uses less film than the 46 ft (14 m) needed for a full wrap, but the shop will likely still charge for labor and preparation.

Is an Isuzu 117 hard to wrap?

The Isuzu 117 is not a hard car to wrap for an experienced installer, but its long doors add work. Each of the two side doors is one large piece of film, which can be tricky to lay without wrinkles on such an old coupe. The car is 168.5 in (4,280 mm) to 170.1 in (4,320 mm) long, so there is a fair amount of surface area to cover. The 1977 restyling also means the installer must confirm the exact bumper and light shapes before cutting film.