Wraps by car

Isuzu Bellett wrap

The Isuzu Bellett wrap is a vinyl wrap job on a compact car built in one generation from 1963 to 1973. The coupe, sedan, and wagon bodies measure between 157.3 in (3,995 mm) and 167.7 in (4,260 mm) in length. A full wrap of any Bellett body takes about 43 ft (13 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Isuzu Bellett, first generation, factory photo
Isuzu Bellett, first generation. Factory color shown.

Isuzu Bellett wrap colors and ideas

  • Bellett black wrap
  • Bellett white wrap
  • Bellett gray wrap
  • Bellett silver wrap
  • Bellett red wrap
  • Bellett blue wrap
  • Bellett green wrap
  • Bellett yellow wrap
  • Bellett orange wrap
  • Bellett purple wrap
  • Bellett pink wrap
  • Bellett teal wrap
  • Bellett brown wrap
  • Bellett gold wrap
  • Bellett chrome wrap
  • Bellett color shift wrap
  • Bellett carbon fiber wrap
  • Bellett camo and patterned wrap

How much vinyl to wrap an Isuzu Bellett

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1973coupe, sedan, wagon (2 or 3 or 4 doors)157.3 in (3,995 mm) to 167.7 in (4,260 mm)about 43 ft (13 m) for the coupe to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Bellett wrap cost factors

Bellett wrap cost is driven by the film amount, the body style, and the labor. The wagon needs more film than the coupe or sedan, so a full wrap costs more on paper. The extra length of 10.4 in (265 mm) in the wagon adds a panel or two.

  • Film for a full wrap: about 43 ft (13 m) for the coupe to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, sedan, wagon (2 or 3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Bellett wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu Bellett, first generation, factory photo
Factory color shown

1963–1973 Bellett coupe, sedan, wagon (first generation)

1963–1973coupe, sedan, wagon (2 or 3 or 4 doors)157.3 in (3,995 mm) to 167.7 in (4,260 mm)

The first generation Isuzu Bellett was offered as a coupe, sedan, and wagon. The style decides the panel plan and the film amount. A full wrap of the coupe takes about 43 ft (13 m) of 60-inch (1.52 m) cast film, while the wagon takes about 57 ft (17.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the coupe to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Bellett

A partial wrap on an Isuzu Bellett covers the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu Bellett: body, cut-outs and film

The Isuzu Bellett vinyl wrap plan changes with the body style. The coupe is the shortest at 157.3 in (3,995 mm) and the wagon the longest at 167.7 in (4,260 mm). A two-door body uses less film than a four-door because there are fewer door handles and window surrounds to cut around.

Bellett wrap ideas start with the tailgate on the wagon. The rear glass sits inside the tailgate, so the film ends at the edge of the glass. For any body style, the wrap is a color change over the whole painted surface.

How much vinyl to wrap a Bellett depends on the body style. The coupe needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. The wagon needs about 57 ft (17.5 m) of cast film. A chrome or patterned film can take up to about 64 ft (19.5 m) because of pattern matching.

Questions about wrapping an Isuzu Bellett

How much vinyl does it take to wrap an Isuzu Bellett?

A full wrap of an Isuzu Bellett takes about 43 ft (13 m) for the coupe and up to 57 ft (17.5 m) for the wagon, using 60-inch (1.52 m) cast film. The exact amount depends on the body style and the film pattern.

Which Bellett body takes more film?

The wagon uses more film than the coupe or sedan. It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the coupe takes about 43 ft (13 m). The wagon's extra length of 167.7 in (4,260 mm) adds panels.

Can I wrap only the hood or the roof of a Bellett?

Yes, you can wrap only the hood or the roof of a Bellett. A partial wrap on this car covers the roof, hood, or mirror caps. The size of the panel determines the amount of film.

Is a Bellett hard to wrap?

A Bellett wrap has one main challenge: the tailgate with the rear glass in it on the wagon. The film must end at the edge of the glass, which adds cutting time. The compact size of the car keeps the job manageable.