Wraps by car

Isuzu Stylus wrap

This page covers the Isuzu Stylus wrap for the compact sedan built from 1990 to 1993. The catalog includes one generation of the Stylus. A full vinyl wrap of the body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Isuzu Stylus, first generation, factory photo
Isuzu Stylus, first generation. Factory color shown.

Isuzu Stylus wrap colors and ideas

  • Stylus black wrap
  • Stylus white wrap
  • Stylus gray wrap
  • Stylus silver wrap
  • Stylus red wrap
  • Stylus blue wrap
  • Stylus green wrap
  • Stylus yellow wrap
  • Stylus orange wrap
  • Stylus purple wrap
  • Stylus pink wrap
  • Stylus teal wrap
  • Stylus brown wrap
  • Stylus gold wrap
  • Stylus chrome wrap
  • Stylus color shift wrap
  • Stylus carbon fiber wrap
  • Stylus camo and patterned wrap

How much vinyl to wrap an Isuzu Stylus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1993sedan (4 doors)165.0 in (4,191 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Stylus wrap cost factors

Stylus wrap cost depends on the size of the car, the film type and how much of the body you cover. The full body of this 165.0 in (4,191 mm) sedan needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate goes up to about 59 ft (18 m) because the pattern has to be matched. A partial wrap of the roof or the hood uses less film and fewer labor hours.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Stylus wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu Stylus, first generation, factory photo
Factory color shown

1990–1993 Stylus sedan (first generation)

1990–1993sedan (4 doors)165.0 in (4,191 mm)

The first generation of the Isuzu Stylus from 1990 to 1993 is the only body this page covers. The paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The sedan has four doors and an overall length of 165.0 in (4,191 mm). The same film estimate applies to every year of this generation.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Stylus

A partial wrap on an Isuzu Stylus can cover the roof, the hood or the mirror caps. A Stylus chrome delete covers the window trim and the badges with black film, which changes the look of the bright parts. Clear paint protection film (PPF) can be applied to the front end to guard the hood, fenders and bumper from stone chips. Every one of these jobs uses less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu Stylus: body, cut-outs and film

An Isuzu Stylus vinyl wrap has to fit a four-door sedan body that is 165.0 in (4,191 mm) long. The size is close to other compact cars of the period, so the film estimate stays near 48 ft (14.5 m). The car has no hatch or wagon versions, which keeps the wrapping area predictable. The four doors and fixed roof mean every panel can be cut from standard 60-inch (1.52 m) film without waste.

Stylus wrap ideas work best when you plan for the door handles, mirrors and the trim around the windows. The handles can stay in place and be wrapped around, but removing them gives a cleaner edge. The side mirrors are small and can be done without taking them off the car. The front and rear bumpers wrap as one piece each, but the grille and the badges are easier to cover if you take them off first.

If you want to know how much vinyl to wrap a Stylus, remember that this page has only the first generation from 1990 to 1993. The body length stays the same for every year, so the film estimate does not change. The sedan body style is the only one offered, so there are no extra door or hatch panels to count. The film list above gives both the standard film and the chrome or patterned film amounts.

Questions about wrapping an Isuzu Stylus

How much vinyl does it take to wrap an Isuzu Stylus?

An Isuzu Stylus takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. That figure covers the sedan body of the only generation in this catalog, which runs from 1990 to 1993. Chrome or patterned film needs more material, about 59 ft (18 m), because the pattern has to line up.

Can I wrap only the hood or the roof of a Stylus?

Yes, a partial wrap of only the hood or the roof of a Stylus is a smaller job with less film. The roof is flat and easy to cover, while the hood has a few curved edges that need heat to form the film. You can also wrap the mirror caps, do a chrome delete on the window trim and badges, or add clear paint protection film (PPF) to the front end.

Is a Stylus hard to wrap?

A Stylus is not a hard car to wrap, but the door handles, side mirrors and window trim add time to the job. The body is 165.0 in (4,191 mm) long, which is a typical compact size and makes the panels easy to reach. The bumpers wrap as one piece each and the roof is flat, so the main work is cutting carefully around the four doors and the trim.

How many generations of the Stylus does this page cover?

This page covers one generation of the Isuzu Stylus: the sedan built from 1990 to 1993. The catalog does not include any other generation or body style for this model.