Wraps by car

Isuzu Ippon wrap

The Isuzu Ippon wrap page covers the 1988–2004 pickup and the vinyl wrap it takes. This page presents one generation with two-door and four-door body styles. A full wrap of the newest body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 62 ft (19 m).

1generations17 mof film for a full wrap

Isuzu Ippon, first generation, factory photo
Isuzu Ippon, first generation. Factory color shown.

Isuzu Ippon wrap colors and ideas

  • Ippon black wrap
  • Ippon white wrap
  • Ippon gray wrap
  • Ippon silver wrap
  • Ippon red wrap
  • Ippon blue wrap
  • Ippon green wrap
  • Ippon yellow wrap
  • Ippon orange wrap
  • Ippon purple wrap
  • Ippon pink wrap
  • Ippon teal wrap
  • Ippon brown wrap
  • Ippon gold wrap
  • Ippon chrome wrap
  • Ippon color shift wrap
  • Ippon carbon fiber wrap
  • Ippon camo and patterned wrap

How much vinyl to wrap an Isuzu Ippon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–2004pickup (2 or 4 doors)174.2 in (4,425 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Ippon wrap cost factors

Ippon wrap cost depends on the film area of 56 ft (17 m) and the pickup bed's two-body layout. The length of 174.2 in (4,425 mm) and the separate cab and bed add cutting and seaming time. Chrome or patterned film uses about 62 ft (19 m), which raises the material cost. Door count and badge removal also change the labor charge.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: pickup (2 or 4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Ippon wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu Ippon, first generation, factory photo
Factory color shown

1988–2004 Ippon pickup (first generation)

1988–2004pickup (2 or 4 doors)174.2 in (4,425 mm)

The first generation Isuzu Ippon is a pickup sold from 1988 to 2004 with two or four doors. Its pickup bed means the cab and the bed are two bodies for the film. The inside of the bed stays bare, so no vinyl is applied there. The body length of 174.2 in (4,425 mm) is the key measurement for ordering cast film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Ippon

A partial wrap on an Isuzu Ippon covers the roof, hood, or mirror caps. Ippon chrome delete changes window trim and badges to black film. Paint protection film (PPF) is a clear film applied to the front end of the pickup. These smaller jobs use less film and suit the flat panels of the Ippon well.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu Ippon: body, cut-outs and film

The pickup body of the Isuzu Ippon vinyl wrap is 174.2 in (4,425 mm) long. Two-door and four-door cabs change how the film is cut around the doors. The bed and cab are wrapped as separate panels, so the installer plans seams at the body gaps. This size means a full wrap is a two-person job in the shop.

Ippon wrap ideas start with the pickup bed because the cab and the bed are wrapped as two bodies. The inside of the bed stays bare, so only the outer bed sides and tailgate receive vinyl. Door handles, mirrors and badges are removed or cut around for a clean finish. The long flat bed panels give a good area for printed graphics.

One generation means the figure for how much vinyl to wrap an Ippon stays the same for all years. The 1988–2004 range did not change the main body dimensions. The two-door and four-door cabs differ only in the door cut lines, not the total film area. Installers ordering film use the same 56 ft (17 m) base number for either cab style.

Questions about wrapping an Isuzu Ippon

How much vinyl does it take to wrap an Isuzu Ippon?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap an Isuzu Ippon. Chrome or patterned film needs about 62 ft (19 m). The number covers the cab and the outer bed panels. The inside of the bed is not wrapped.

Is the bed of an Ippon wrapped?

The bed of an Ippon is wrapped on the outside only. The cab and the bed are treated as two bodies for the film. The inside of the bed stays bare because it is not a visible surface. The tailgate and outer bed sides get vinyl.

Can I wrap only the hood or the roof of an Ippon?

Yes, you can wrap only the hood or the roof of an Ippon. A partial wrap on this pickup covers the roof, hood, or mirror caps. These panels are separate from the body and use a small amount of film. Chrome delete on the window trim and badges is also a partial job.

Is an Ippon hard to wrap?

An Ippon is not especially hard to wrap, but the pickup bed adds work. The cab and the bed are two bodies, so the installer plans seams at the gap. The length of 174.2 in (4,425 mm) means long panels need careful handling. The inside of the bed is left bare, which simplifies the job.