Wraps by car

Isuzu KB wrap

The Isuzu KB wrap page covers two generations of this pickup. The third generation ran from 1988 to 2003 and the second generation from 1980 to 1988. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations20 mof film for a full wrap

Isuzu KB, third generation, factory photo
Isuzu KB, third generation. Factory color shown.

Isuzu KB wrap colors and ideas

  • Isuzu KB black wrap
  • Isuzu KB white wrap
  • Isuzu KB gray wrap
  • Isuzu KB silver wrap
  • Isuzu KB red wrap
  • Isuzu KB blue wrap
  • Isuzu KB green wrap
  • Isuzu KB yellow wrap
  • Isuzu KB orange wrap
  • Isuzu KB purple wrap
  • Isuzu KB pink wrap
  • Isuzu KB teal wrap
  • Isuzu KB brown wrap
  • Isuzu KB gold wrap
  • Isuzu KB chrome wrap
  • Isuzu KB color shift wrap
  • Isuzu KB carbon fiber wrap
  • Isuzu KB camo and patterned wrap

How much vinyl to wrap an Isuzu KB

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–2003pickup (4 doors)196.1 in (4,980 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1980–1988pickup (2 or 4 doors)173.4 in (4,405 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Isuzu KB wrap cost factors

Isuzu KB wrap cost depends on the size of the body and the film you choose. A third generation has more surface area than a second generation, so it uses more material and more labor. A full wrap also costs more than a partial job like a hood or roof only. The condition of the paint affects how much preparation work is needed before the film goes on.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Isuzu KB wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu KB, third generation, factory photo
Factory color shown

1988–2003 Isuzu KB pickup (third generation)

1988–2003pickup (4 doors)196.1 in (4,980 mm)

The third generation Isuzu KB has a pickup bed that changes how the film is planned. The cab and the bed are two bodies for the film, and the inside of the bed stays bare. This means the installer treats the truck as a two-part project with a clean break at the bed gap. The bed sides and tailgate are wrapped, but the floor and inner walls are not.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Isuzu KB, second generation, factory photo
Factory color shown

1980–1988 Isuzu KB pickup (second generation)

1980–1988pickup (2 or 4 doors)173.4 in (4,405 mm)

The second generation Isuzu KB is often wrapped on paint that is decades old. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer checks adhesion on an inconspicuous area before committing to the whole body. If the paint is failing, the wrap may not bond well and could lift.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Isuzu KB

A partial wrap on an Isuzu KB covers the roof, hood, or mirror caps only. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap and can be done in less time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu KB: body, cut-outs and film

An Isuzu KB vinyl wrap covers a pickup with real body length. The third generation measures 196.1 in (4,980 mm) long and has four doors. The second generation is shorter at 173.4 in (4,405 mm) with two or four doors. Wrapping a pickup means treating the cab and the bed as two separate bodies.

Isuzu KB wrap ideas start with the pickup bed. The cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The tailgate and bed sides take film like any flat panel but need careful trimming at the top rails. The front bumper and door handles are typical cut-out areas.

How much vinyl to wrap an Isuzu KB depends on the generation. A third generation needs about 66 ft (20 m) of 60-inch (1.52 m) cast film for a standard color change. A second generation needs about 52 ft (16 m) of the same film. Chrome or patterned film adds roughly ten percent to both estimates.

Questions about wrapping an Isuzu KB

How much vinyl does it take to wrap an Isuzu KB?

About 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap is needed for a full wrap of the newest Isuzu KB. That figure is for the third generation body from 1988 to 2003. The second generation needs about 52 ft (16 m) of the same film.

Is the bed of an Isuzu KB wrapped?

No, the bed of an Isuzu KB is not wrapped on the inside. The cab and the bed are wrapped as two bodies, but the interior of the bed stays bare. Only the exterior surfaces of the bed sides and tailgate receive film.

Can I wrap only the hood or the roof of an Isuzu KB?

Yes, you can wrap only the hood or the roof of an Isuzu KB. A partial wrap covers the roof, hood, or mirror caps as a smaller job. This uses less film than a full wrap and is often chosen for a color contrast.

Is an Isuzu KB hard to wrap?

An Isuzu KB is not especially hard to wrap, but the pickup bed adds work. The cab and the bed must be wrapped as two separate bodies, which means more cutting and seaming. The third generation is a large vehicle at 196.1 in (4,980 mm) long, so it takes more time to cover the surface.