Wraps by car

Isuzu Piazza wrap

The Isuzu Piazza wrap page covers both generations of the Isuzu Piazza, from 1981 to 1994. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 54 ft (16.5 m) for the same car.

2generations14.5 mof film for a full wrap

Isuzu Piazza, second generation, factory photo
Isuzu Piazza, second generation. Factory color shown.

Isuzu Piazza wrap colors and ideas

  • Piazza black wrap
  • Piazza white wrap
  • Piazza gray wrap
  • Piazza silver wrap
  • Piazza red wrap
  • Piazza blue wrap
  • Piazza green wrap
  • Piazza yellow wrap
  • Piazza orange wrap
  • Piazza purple wrap
  • Piazza pink wrap
  • Piazza teal wrap
  • Piazza brown wrap
  • Piazza gold wrap
  • Piazza chrome wrap
  • Piazza color shift wrap
  • Piazza carbon fiber wrap
  • Piazza camo and patterned wrap

How much vinyl to wrap an Isuzu Piazza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1994hatchback (3 doors)163.4 in (4,150 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1981–1991hatchback (3 doors)172.6 in (4,385 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Piazza wrap cost factors

Piazza wrap cost depends on the car's film estimate, the number of cut-outs, and the condition of the paint. A full wrap takes about 48 ft (14.5 m) of cast film on the newer body, or about 54 ft (16.5 m) with chrome or patterned film. Removing trim and badges adds labor, and panel prep changes with paint age.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Piazza wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu Piazza, second generation, factory photo
Factory color shown

1991–1994 Piazza hatchback (second generation)

1991–1994hatchback (3 doors)163.4 in (4,150 mm)

The second-generation Isuzu Piazza from 1991 to 1994 is a compact three-door hatchback that takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Paint on a car this old may be original or repainted, so a test spot comes before a full wrap. The tailgate glass and two long doors shape the main panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Isuzu Piazza, first generation, factory photo
Factory color shown

1981–1991 Piazza hatchback (first generation)

1981–1991hatchback (3 doors)172.6 in (4,385 mm)

The first-generation Isuzu Piazza from 1981 to 1991 is a compact three-door hatchback, 172.6 in (4,385 mm) long. That length and the three-door body mean about 43 ft (13 m) of 60-inch (1.52 m) cast film, or about 52 ft (16 m) for chrome or patterned film. The tailgate and two long side doors make a small number of large panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Piazza

A Piazza chrome delete covers the window trim and badges with black film. A partial wrap can cover the roof, hood, and mirror caps. Paint protection film (PPF) is clear film on the front end, often the hood, fenders, and bumper.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu Piazza: body, cut-outs and film

The Isuzu Piazza vinyl wrap follows a compact three-door hatchback shape that keeps film use modest. The newest body is 163.4 in (4,150 mm) long, and each long side door is one large piece of film. The tailgate carries the rear glass, so the film ends at the edge of the glass.

Piazza wrap ideas start with the tailgate, where the film must end at the edge of the rear glass. The two long side doors each take one large piece, so a clean install needs wide 60-inch (1.52 m) film. Door handles, mirrors, and badges come off for a tidy edge.

How much vinyl to wrap a Piazza changes between the two generations. A first-generation car from 1981 to 1991 is 172.6 in (4,385 mm) long and takes about 43 ft (13 m) of cast film. A second-generation car from 1991 through 1994 is shorter and takes about 48 ft (14.5 m).

Questions about wrapping an Isuzu Piazza

How much vinyl does it take to wrap an Isuzu Piazza?

A full wrap of an Isuzu Piazza takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the figure is about 54 ft (16.5 m). These numbers are for the newest body, from 1991 to 1994.

Can I wrap only the hood or the roof of a Piazza?

Yes, a Piazza can be wrapped only on the hood or the roof. A partial wrap covers the roof, hood, and mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is another option for the front end.

Is a Piazza hard to wrap?

A Piazza is not the hardest wrap, but the tailgate with the rear glass in it adds work because the film ends at the edge of the glass. Each of the two long side doors is one large piece, so you need careful handling. The compact size keeps the film amount moderate.

How many generations of the Piazza does this page cover?

This page covers two generations of the Isuzu Piazza, from 1981 to 1994. The first generation ran from 1981 to 1991, and the second from 1991 to 1994. Both are three-door hatchbacks.