Wraps by car

Isuzu Ascender wrap

This page covers the Isuzu Ascender wrap and its vinyl wrap film needs. The catalog lists one generation, produced from 2003 to 2008. A full wrap of the first generation uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

1generations21.5 mof film for a full wrap

Isuzu Ascender, first generation, factory photo
Isuzu Ascender, first generation. Factory color shown.

Isuzu Ascender wrap colors and ideas

  • Ascender black wrap
  • Ascender white wrap
  • Ascender gray wrap
  • Ascender silver wrap
  • Ascender red wrap
  • Ascender blue wrap
  • Ascender green wrap
  • Ascender yellow wrap
  • Ascender orange wrap
  • Ascender purple wrap
  • Ascender pink wrap
  • Ascender teal wrap
  • Ascender brown wrap
  • Ascender gold wrap
  • Ascender chrome wrap
  • Ascender color shift wrap
  • Ascender carbon fiber wrap
  • Ascender camo and patterned wrap

How much vinyl to wrap an Isuzu Ascender

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2008SUV (5 doors)207.6 in (5,273 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Ascender wrap cost factors

The Ascender wrap cost depends on the size of the vehicle and the film type. At 207.6 in (5,273 mm) long and 75.5 in (1,918 mm) tall, it uses more material than a smaller car. Chrome or patterned film raises the amount to about 87 ft (26.5 m). Extra labor for the roof, wrapped from a platform, also adds to the cost.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (75.5 in (1,918 mm)): the roof is wrapped from a platform.

Ascender wraps by generation

Swipe sideways. Tap a card for the full description.

Isuzu Ascender, first generation, factory photo
Factory color shown

2003–2008 Ascender SUV (first generation)

2003–2008SUV (5 doors)207.6 in (5,273 mm)

The first generation of the Isuzu Ascender, from 2003 to 2008, has a tall body. Its height of 75.5 in (1,918 mm) means the roof is wrapped from a platform. That extra step takes more time than wrapping a lower vehicle.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (75.5 in (1,918 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on an Ascender

For a partial wrap on an Ascender, you can wrap the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Isuzu Ascender: body, cut-outs and film

The Isuzu Ascender vinyl wrap has to cover a large SUV body. The only body style is a five-door SUV with a length of 207.6 in (5,273 mm). Its tall body, at 75.5 in (1,918 mm), means extra film for the roof and upper panels.

For Ascender wrap ideas, think about the tailgate with its rear glass. Installers trim the film at the edge of that glass to keep the tailgate neat. The roof is wrapped from a platform because of the body height.

If you are counting how much vinyl to wrap an Ascender, the number stays the same for this page. There is only one production generation, from 2003 to 2008, so no change between generations affects the estimate. The film amount for a full wrap is about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Isuzu Ascender

How much vinyl does it take to wrap an Isuzu Ascender?

You need about 70 ft (21.5 m) of 60-inch (1.52 m) cast film to wrap an Isuzu Ascender. This figure is for a full wrap of the first generation body. Chrome or patterned film requires about 87 ft (26.5 m).

Can I wrap only the hood or the roof of an Ascender?

Yes, you can wrap only the hood or the roof of an Ascender. These are common partial wrap jobs, along with mirror caps. A partial wrap uses less film than a full wrap.

Is an Ascender hard to wrap?

An Ascender takes extra work to wrap because of its size and tailgate. Its height of 75.5 in (1,918 mm) means the roof must be wrapped from a platform. The tailgate has rear glass, so the film ends at the edge of the glass.

How many generations of the Ascender does this page cover?

This page covers one generation of the Isuzu Ascender, produced from 2003 to 2008. There are no other generations in the catalog. The film estimate is for that generation.