Wraps by car

JAC e-S2 wrap

The JAC e-S2 wrap page covers the single generation of this electric SUV built from 2021 onward. A full wrap of its newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap. If you choose chrome or patterned film, plan for about 62 ft (19 m). The page lists the body details that shape cut-outs and panel counts.

1generations16.5 mof film for a full wrap

JAC e-S2, first generation, factory photo
JAC e-S2, first generation. Factory color shown.

JAC e-S2 wrap colors and ideas

  • e-S2 black wrap
  • e-S2 white wrap
  • e-S2 gray wrap
  • e-S2 silver wrap
  • e-S2 red wrap
  • e-S2 blue wrap
  • e-S2 green wrap
  • e-S2 yellow wrap
  • e-S2 orange wrap
  • e-S2 purple wrap
  • e-S2 pink wrap
  • e-S2 teal wrap
  • e-S2 brown wrap
  • e-S2 gold wrap
  • e-S2 chrome wrap
  • e-S2 color shift wrap
  • e-S2 carbon fiber wrap
  • e-S2 camo and patterned wrap

How much vinyl to wrap a JAC e-S2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)162.8 in (4,135 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

e-S2 wrap cost factors

The e-S2 wrap cost is driven by the size of the car, the film you pick, and the labor for its detailed cut-outs. At 162.8 in (4,135 mm) long, this SUV uses about 54 ft (16.5 m) of standard film, but chrome or patterned film raises the amount to roughly 62 ft (19 m). Because every trim has parking sensors, cameras and fog lamps, the installer spends extra time cutting around each of those parts. A color change wrap costs more than a single-color wrap due to the extra film and precision required.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

e-S2 wraps by generation

Swipe sideways. Tap a card for the full description.

JAC e-S2, first generation, factory photo
Factory color shown

2021–now e-S2 SUV (first generation)

2021–nowSUV (5 doors)162.8 in (4,135 mm)

The first generation JAC e-S2, produced from 2021 to now, is a five-door SUV with a length of 162.8 in (4,135 mm). Its boxy rear and upright tailgate mean the film for the back of the car is split into several panels. The short overhangs reduce the amount of film needed for the bumpers compared to a longer SUV. In total, this body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an e-S2

The e-S2 chrome delete is a way to cover the window trim and badges with black film instead of wrapping the whole body. A partial wrap on this SUV can be as small as the roof, the hood, or the mirror caps, each using far less film than a full wrap. Paint protection film (PPF) is also an option: a clear film is applied to the front end to guard against stone chips. These smaller jobs let you change the look or protect high-wear areas without wrapping every panel.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC e-S2: body, cut-outs and film

The JAC e-S2 vinyl wrap has to cover one SUV body style with five doors and a length of 162.8 in (4,135 mm). Its compact size keeps the total film needed on the lower side for an SUV, but the tall tailgate and bumpers add panels. You still wrap the roof, all four doors, the tailgate, the hood, the bumpers, the mirrors and the rocker panels. A careful seam layout on the curved rear corners reduces visible overlaps.

The e-S2 wrap ideas begin with the electric car's charge port door, which is wrapped as a small piece of its own so it can open freely. A tailgate with the rear glass in it means the film ends at the edge of the glass, leaving a clean line. Every trim has parking sensors in the bumpers, so the installer cuts the film around each sensor. Cameras in the body and fog lamps in the front bumper also need precise cut-outs.

How much vinyl to wrap an e-S2 depends on the generation you are working on, because this page covers only one generation from 2021 onward. Since there is no older body to compare, the film estimate of about 54 ft (16.5 m) of 60-inch (1.52 m) cast film applies to every e-S2 built in those years. The amount does not change between trim levels, because the body shape is the same. If you measure your own car before ordering, use the 162.8 in (4,135 mm) length as a check.

Questions about wrapping a JAC e-S2

How much vinyl does it take to wrap a JAC e-S2?

A full wrap of a JAC e-S2 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 62 ft (19 m) because the pattern repeat or extra material for chrome finishing uses more product. The 2021–now body is the only generation, so the figure is the same for every e-S2.

Can I wrap only the hood or the roof of an e-S2?

Yes, you can wrap only the hood or the roof of an e-S2 as a partial wrap. Other small jobs on this car include mirror caps, chrome delete on the window trim and badges, or clear paint protection film on the front end. Each of these uses far less film than the full 54 ft (16.5 m) needed for the whole body.

Is an e-S2 hard to wrap?

Yes, an e-S2 is harder to wrap than a simple sedan because of its electric car details and body parts. Every trim has parking sensors in the bumpers, cameras in the body, and fog lamps in the front bumper, so the installer must cut the film around each one. The charge port door is wrapped as a small separate piece so it can still open. The tailgate with the rear glass in it also requires the film to end cleanly at the glass edge.

How many generations of the e-S2 does this page cover?

This page covers one generation of the JAC e-S2, which has been in production since 2021. There is no older or newer generation in the catalog. All the film estimates and body notes on this page apply to that single generation.