Wraps by car

JAC S1 (Rein) wrap

The JAC S1 (Rein) wrap page covers this SUV from 2006 to 2013 and lists the film a full wrap needs. The catalog shows one generation of the S1 (Rein). A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

JAC S1 (Rein), first generation, factory photo
JAC S1 (Rein), first generation. Factory color shown.

JAC S1 (Rein) wrap colors and ideas

  • S1 (Rein) black wrap
  • S1 (Rein) white wrap
  • S1 (Rein) gray wrap
  • S1 (Rein) silver wrap
  • S1 (Rein) red wrap
  • S1 (Rein) blue wrap
  • S1 (Rein) green wrap
  • S1 (Rein) yellow wrap
  • S1 (Rein) orange wrap
  • S1 (Rein) purple wrap
  • S1 (Rein) pink wrap
  • S1 (Rein) teal wrap
  • S1 (Rein) brown wrap
  • S1 (Rein) gold wrap
  • S1 (Rein) chrome wrap
  • S1 (Rein) color shift wrap
  • S1 (Rein) carbon fiber wrap
  • S1 (Rein) camo and patterned wrap

How much vinyl to wrap a JAC S1 (Rein)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2013SUV (5 doors)177.2 in (4,500 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

S1 (Rein) wrap cost factors

S1 (Rein) wrap cost depends on the size of this SUV, which is 177.2 in (4,500 mm) long, and on the film you choose. A full wrap takes about 61 ft (18.5 m) of cast film, or about 70 ft (21.5 m) if you choose chrome or patterned film. The tailgate with the rear glass in it adds a little work because the film ends at the edge of the glass.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2011: bumpers and lights differ between the versions, and so do the film cuts.

S1 (Rein) wraps by generation

Swipe sideways. Tap a card for the full description.

JAC S1 (Rein), first generation, factory photo
Factory color shown

2006–2013 S1 (Rein) SUV (first generation)

2006–2013SUV (5 doors)177.2 in (4,500 mm)

The first generation of the JAC S1 (Rein) ran from 2006 to 2013 and was restyled in 2011. Bumpers and lights changed in 2011, so film cut for one version does not fit the other. If you have a 2011 car, check which bumper shape yours has before cutting the film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an S1 (Rein)

The S1 (Rein) chrome delete covers the window trim and badges with black film. A partial wrap can be just the roof, the hood, or the mirror caps on their own. For paint protection film (PPF), clear film on the front end protects the hood and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC S1 (Rein): body, cut-outs and film

The JAC S1 (Rein) vinyl wrap is sized around a five-door SUV body that is 177.2 in (4,500 mm) long. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. This means the rear panel is one large section that wraps around the sides of the tailgate.

S1 (Rein) wrap ideas work around a tailgate with the rear glass in it, so the film ends at the edge of the glass. The door handles and side mirrors come off for clean edges. You can cut out the badges or remove them and reinstall them after wrapping.

To know how much vinyl to wrap an S1 (Rein), you count the same five-door SUV body for every year. The restyling in 2011 changed bumpers and lights, but the main panels stay the same size. A full wrap still takes about 61 ft (18.5 m) of film on any year.

Questions about wrapping a JAC S1 (Rein)

How much vinyl does it take to wrap a JAC S1 (Rein)?

A full wrap of a JAC S1 (Rein) takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. This figure is for the newest body in the catalog, which is the only generation. If you choose chrome or patterned film, plan for about 70 ft (21.5 m).

Which years of the S1 (Rein) take the same film cuts?

The S1 (Rein) was made from 2006 to 2013, with a restyling in 2011. Film cuts for the bumpers and lights do not match between pre-2011 and post-2011 versions. The main body panels take the same film cuts for all years of this generation.

Can I wrap only the hood or the roof of an S1 (Rein)?

Yes, you can wrap only the hood or the roof of an S1 (Rein). A partial wrap can be the roof, the hood, or the mirror caps on their own. You can also chrome delete the window trim and badges instead of wrapping whole panels.

Is an S1 (Rein) hard to wrap?

The JAC S1 (Rein) is not especially hard to wrap, but the tailgate adds work because the rear glass is in it. The film ends at the edge of the glass, so you need a careful cut around the glass edge. At 177.2 in (4,500 mm) long, it is a typical SUV size for a wrap.