Wraps by car

JAC iC5 wrap

This page covers the JAC iC5 wrap in vinyl wrap for the one generation in the catalog. The JAC iC5 is a compact liftback produced from 2020 onward. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

JAC iC5, first generation, factory photo
JAC iC5, first generation. Factory color shown.

JAC iC5 wrap colors and ideas

  • JAC iC5 black wrap
  • JAC iC5 white wrap
  • JAC iC5 gray wrap
  • JAC iC5 silver wrap
  • JAC iC5 red wrap
  • JAC iC5 blue wrap
  • JAC iC5 green wrap
  • JAC iC5 yellow wrap
  • JAC iC5 orange wrap
  • JAC iC5 purple wrap
  • JAC iC5 pink wrap
  • JAC iC5 teal wrap
  • JAC iC5 brown wrap
  • JAC iC5 gold wrap
  • JAC iC5 chrome wrap
  • JAC iC5 color shift wrap
  • JAC iC5 carbon fiber wrap
  • JAC iC5 camo and patterned wrap

How much vinyl to wrap a JAC iC5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowliftback (5 doors)187.8 in (4,770 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

JAC iC5 wrap cost factors

JAC iC5 wrap cost depends on the amount of film, the number of panels, and the labor for the tailgate and charge port door. A full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) film. The electric charge port door adds a small separate piece.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

JAC iC5 wraps by generation

Swipe sideways. Tap a card for the full description.

JAC iC5, first generation, factory photo
Factory color shown

2020–now JAC iC5 liftback (first generation)

2020–nowliftback (5 doors)187.8 in (4,770 mm)

The first generation JAC iC5 is a five-door liftback with a tailgate that includes the rear glass. Its 187.8 in (4,770 mm) length and the tailgate panel determine the film amount. You count about 59 ft (18 m) of 60-inch (1.52 m) film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a JAC iC5

On a JAC iC5 chrome delete covers the window trim and badges with black film. A partial wrap can cover the roof, hood, and mirror caps. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC iC5: body, cut-outs and film

A JAC iC5 vinyl wrap on this liftback uses fewer large panels than a sedan with a separate trunk. The body measures 187.8 in (4,770 mm) long, which is a mid-size footprint for a compact car. You plan for the five doors and the tailgate when counting film.

JAC iC5 wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. The charge port door is wrapped as a small piece of its own on this electric car. You may also want chrome delete on the window trim and badges.

How much vinyl to wrap a JAC iC5 depends mainly on the body style and the size of the panels. The liftback design means the tailgate is one large piece without a separate trunk lid. The 187.8 in (4,770 mm) length calls for about 59 ft (18 m) of 60-inch (1.52 m) film for a full wrap.

Questions about wrapping a JAC iC5

How much vinyl does it take to wrap a JAC iC5?

It takes about 59 ft (18 m) of 60-inch (1.52 m) vinyl to wrap a JAC iC5 fully. That figure is for a cast film on the first generation liftback body. Chrome or patterned film would need about 70 ft (21.5 m).

Can I wrap only the hood or the roof of a JAC iC5?

Yes, you can wrap only the hood or the roof of a JAC iC5. A partial wrap on this car includes the roof, hood, and mirror caps. The shop can also do chrome delete on the window trim and badges.

Is a JAC iC5 hard to wrap?

A JAC iC5 is not especially hard to wrap, but the tailgate and charge port door add some work. The film on the tailgate must end at the edge of the rear glass. The charge port door is wrapped as a small separate piece.

How many generations of the JAC iC5 does this page cover?

This page covers one generation of the JAC iC5, the first generation produced from 2020 onward. It is the only generation in the catalog.