Wraps by car

JAC S3 wrap

The JAC S3 wrap page covers the compact hatchback from its 2014 launch to the current model, one generation in the catalog. A full vinyl wrap of the newest JAC S3 body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 66 ft (20 m) of the same width.

1generations17.5 mof film for a full wrap

JAC S3, first generation, factory photo
JAC S3, first generation. Factory color shown.

JAC S3 wrap colors and ideas

  • JAC S3 black wrap
  • JAC S3 white wrap
  • JAC S3 gray wrap
  • JAC S3 silver wrap
  • JAC S3 red wrap
  • JAC S3 blue wrap
  • JAC S3 green wrap
  • JAC S3 yellow wrap
  • JAC S3 orange wrap
  • JAC S3 purple wrap
  • JAC S3 pink wrap
  • JAC S3 teal wrap
  • JAC S3 brown wrap
  • JAC S3 gold wrap
  • JAC S3 chrome wrap
  • JAC S3 color shift wrap
  • JAC S3 carbon fiber wrap
  • JAC S3 camo and patterned wrap

How much vinyl to wrap a JAC S3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowhatchback (5 doors)170.3 in (4,325 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

JAC S3 wrap cost factors

JAC S3 wrap cost is set mainly by the size of the car, the amount of film, and the extra work on its body parts. This compact hatchback is 170.3 in (4,325 mm) long and needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a standard color change wrap. The roof rails, parking sensors, and fog lamps on some trims add labor time for removal or careful cutting.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016, 2019: bumpers and lights differ between the versions, and so do the film cuts.

JAC S3 wraps by generation

Swipe sideways. Tap a card for the full description.

JAC S3, first generation, factory photo
Factory color shown

2014–now JAC S3 hatchback (first generation)

2014–nowhatchback (5 doors)170.3 in (4,325 mm)

The first generation JAC S3 has been in production since 2014, with restylings in 2016 and 2019. The 2016 and 2019 restylings changed the bumpers and lights, meaning film cut for one version does not fit the other. The S3 remains the same five-door hatchback size of 170.3 in (4,325 mm) long across the generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a JAC S3

A partial wrap on a JAC S3 can be the roof, hood, or mirror caps on their own. A JAC S3 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end of the S3.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC S3: body, cut-outs and film

The JAC S3 vinyl wrap is shaped by its five-door hatchback body and compact footprint of 170.3 in (4,325 mm) long. The single body style means the film estimate stays consistent across the one generation. The roofline and tailgate are easy to reach without a ladder on this size of car.

JAC S3 wrap ideas start with the tailgate that has the rear glass in it, so the film ends at the edge of the glass. Every trim of the S3 has roof rails, and they come off before the roof is wrapped or the film is cut along them. Some trims have parking sensors in the bumpers, which require cutting the film around each sensor. Some trims also have fog lamps in the front bumper, adding cut-outs in the bumper film.

How much vinyl to wrap a JAC S3 depends on the version you have, because the 2016 and 2019 restylings changed the bumpers and lights. Film cut for one version does not fit the other version exactly. If you order a kit, check that it matches the production years of your S3.

Questions about wrapping a JAC S3

How much vinyl does it take to wrap a JAC S3?

Yes, a full JAC S3 wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) for chrome or patterned film. The JAC S3 is a compact hatchback 170.3 in (4,325 mm) long, so the film estimate stays close to that range for the one generation.

Which years of the JAC S3 take the same film cuts?

All JAC S3 cars from 2014 to the present share the same generation, but the 2016 and 2019 restylings changed bumpers and lights. Film cuts for the original 2014–2016 version do not fit the restyled versions, and the 2016 and 2019 versions also differ from each other. You need cuts that match the exact production years of your S3.

Can I wrap only the hood or the roof of a JAC S3?

Yes, you can wrap only the hood or the roof of a JAC S3, and the job list for a partial wrap also includes mirror caps. The roof has roof rails on every trim, which come off before the roof is wrapped or the film is cut along them. A partial wrap uses less film than a full wrap of the whole car.

Is a JAC S3 hard to wrap?

A JAC S3 is not the most difficult car to wrap, but a few parts add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass rather than wrapping around. Every trim has roof rails that need removal or careful cutting, and some trims have parking sensors and fog lamps that require cut-outs in the bumper film.