Wraps by car

JAC M5 wrap

This page is a guide to a JAC M5 wrap, a full vinyl wrap on the first-generation minivan. One generation has been in production since 2011 up to now. A full wrap of the current body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film.

1generations23.5 mof film for a full wrap

JAC M5, first generation, factory photo
JAC M5, first generation. Factory color shown.

JAC M5 wrap colors and ideas

  • JAC M5 black wrap
  • JAC M5 white wrap
  • JAC M5 gray wrap
  • JAC M5 silver wrap
  • JAC M5 red wrap
  • JAC M5 blue wrap
  • JAC M5 green wrap
  • JAC M5 yellow wrap
  • JAC M5 orange wrap
  • JAC M5 purple wrap
  • JAC M5 pink wrap
  • JAC M5 teal wrap
  • JAC M5 brown wrap
  • JAC M5 gold wrap
  • JAC M5 chrome wrap
  • JAC M5 color shift wrap
  • JAC M5 carbon fiber wrap
  • JAC M5 camo and patterned wrap

How much vinyl to wrap a JAC M5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–nowvan (5 doors)200.8 in (5,100 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

JAC M5 wrap cost factors

JAC M5 wrap cost depends on the film type, the size of the van, and the labor needed. The van is 200.8 in (5,100 mm) long and 77.6 in (1,970 mm) tall, so a full wrap uses about 77 ft (23.5 m) of film. Chrome or patterned film takes about 87 ft (26.5 m), which raises the amount of film and time. The sliding door tracks also add cutting work.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (77.6 in (1,970 mm)): the roof is wrapped from a platform.

JAC M5 wraps by generation

Swipe sideways. Tap a card for the full description.

JAC M5, first generation, factory photo
Factory color shown

2011–now JAC M5 van (first generation)

2011–nowvan (5 doors)200.8 in (5,100 mm)

The first generation JAC M5 has sliding side doors where the tracks stay bare and decide where the film is cut. The door tracks are left unwrapped, and the film edge is trimmed neatly along them. This creates a clean break line on each side of the van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (77.6 in (1,970 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a JAC M5

For a partial wrap on the JAC M5, the roof, hood, and mirror caps are common choices. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC M5: body, cut-outs and film

A JAC M5 vinyl wrap covers a five-door van with a length of 200.8 in (5,100 mm) and a tall body. The large flat sides and roof panels are straightforward to cover with film. The height of 77.6 in (1,970 mm) means installers need a platform to reach the roof.

For JAC M5 wrap ideas, focus on the sliding side doors and tall body. The door tracks stay bare and the film is cut along them, which can be highlighted with a contrasting color. Wrapping the roof from a platform is required due to the height.

When estimating how much vinyl to wrap a JAC M5, use the dimensions of the current body. A full wrap needs about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 87 ft (26.5 m) because of pattern matching.

Questions about wrapping a JAC M5

How much vinyl does it take to wrap a JAC M5?

It takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film to wrap a JAC M5 fully. This estimate is for the current van without extra film for pattern matching. If you use chrome or patterned film, you need about 87 ft (26.5 m).

Are the sliding doors of a JAC M5 wrapped?

Yes, the sliding doors of a JAC M5 are wrapped, but the tracks stay bare. The film is cut along the door tracks, so the track area remains unwrapped. This is standard practice for sliding doors on vans.

Can I wrap only the hood or the roof of a JAC M5?

Yes, you can wrap only the hood or the roof of a JAC M5. These are part of a partial wrap, which also often includes mirror caps. A partial wrap lets you change the look of specific panels without covering the whole van.

Is a JAC M5 hard to wrap?

Yes, a JAC M5 is somewhat hard to wrap due to its tall body and sliding doors. The height of 77.6 in (1,970 mm) means installers need a platform for the roof. The sliding door tracks require careful cutting to leave them bare. The overall size also means more material and time.