Wraps by car

JAC T9 wrap

The JAC T9 wrap page covers the first generation of the JAC T9 pickup, produced from 2020 onward. A full vinyl wrap of the newest body uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 80 ft (24.5 m) for the same coverage.

1generations21 mof film for a full wrap

JAC T9, first generation, factory photo
JAC T9, first generation. Factory color shown.

JAC T9 wrap colors and ideas

  • JAC T9 black wrap
  • JAC T9 white wrap
  • JAC T9 gray wrap
  • JAC T9 silver wrap
  • JAC T9 red wrap
  • JAC T9 blue wrap
  • JAC T9 green wrap
  • JAC T9 yellow wrap
  • JAC T9 orange wrap
  • JAC T9 purple wrap
  • JAC T9 pink wrap
  • JAC T9 teal wrap
  • JAC T9 brown wrap
  • JAC T9 gold wrap
  • JAC T9 chrome wrap
  • JAC T9 color shift wrap
  • JAC T9 carbon fiber wrap
  • JAC T9 camo and patterned wrap

How much vinyl to wrap a JAC T9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowpickup (4 doors)209.8 in (5,330 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

JAC T9 wrap cost factors

JAC T9 wrap cost depends on the size of the truck, the film you choose, and the labour for the separate cab and bed. The body is 209.8 in (5,330 mm) long and 75.6 in (1,920 mm) tall, so a full wrap uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the film amount to about 80 ft (24.5 m).

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (75.6 in (1,920 mm)): the roof is wrapped from a platform.

JAC T9 wraps by generation

Swipe sideways. Tap a card for the full description.

JAC T9, first generation, factory photo
Factory color shown

2020–now JAC T9 pickup (first generation)

2020–nowpickup (4 doors)209.8 in (5,330 mm)

The first generation JAC T9 has a separate pickup bed, so the cab and the bed are wrapped as two bodies. The inside of the bed stays bare because film is not applied to the load area. This split makes the install more involved than a single-body vehicle.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (75.6 in (1,920 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a JAC T9

Partial wrap options for the JAC T9 include the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC T9: body, cut-outs and film

A JAC T9 vinyl wrap treats the cab and the bed as two separate bodies because the pickup has a separate bed. The truck is 209.8 in (5,330 mm) long and 75.6 in (1,920 mm) tall, so a full wrap needs careful planning around the roof and the gap between cab and bed. Installers work from a platform to reach the roof cleanly.

JAC T9 wrap ideas often include a chrome delete with black film on the window trim and badges. The charge port door is wrapped as its own small piece so the port can still open. The inside of the bed stays bare because film is not applied there.

To work out how much vinyl to wrap a JAC T9, the installer measures the cab and the bed as two bodies and adds the cut-outs for the charge port door. The first generation has kept the same 209.8 in (5,330 mm) length, so the standard estimate is about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 80 ft (24.5 m) for the same body.

Questions about wrapping a JAC T9

How much vinyl does it take to wrap a JAC T9?

It takes about 69 ft (21 m) of 60-inch (1.52 m) cast film to wrap a JAC T9. The film estimate covers the cab and the bed as two bodies, including the charge port door piece. Chrome or patterned film adds up to about 80 ft (24.5 m) for the same coverage.

Is the bed of a JAC T9 wrapped?

No, the inside of the bed of a JAC T9 is not wrapped. The cab and the bed are wrapped as two separate bodies, but the load area itself stays bare.

Can I wrap only the hood or the roof of a JAC T9?

Yes, you can wrap only the hood or the roof of a JAC T9. A partial wrap can also cover the mirror caps, or a chrome delete can cover the window trim and badges with black film.

Is a JAC T9 hard to wrap?

A JAC T9 is harder to wrap than a small car because it is tall at 75.6 in (1,920 mm) and has a separate bed. The installer needs a platform for the roof and wraps the charge port door as its own small piece.