Wraps by car

JAC M1 (Refine) wrap

The JAC M1 (Refine) wrap page covers the first-generation minivan built from 2006 to 2011, and a full vinyl wrap of this body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The catalog lists one generation, so film estimates apply to the whole production run. Owners looking for a JAC M1 (Refine) wrap will find the measurements and methods here.

1generations21.5 mof film for a full wrap

JAC M1 (Refine), first generation, factory photo
JAC M1 (Refine), first generation. Factory color shown.

JAC M1 (Refine) wrap colors and ideas

  • M1 (Refine) black wrap
  • M1 (Refine) white wrap
  • M1 (Refine) gray wrap
  • M1 (Refine) silver wrap
  • M1 (Refine) red wrap
  • M1 (Refine) blue wrap
  • M1 (Refine) green wrap
  • M1 (Refine) yellow wrap
  • M1 (Refine) orange wrap
  • M1 (Refine) purple wrap
  • M1 (Refine) pink wrap
  • M1 (Refine) teal wrap
  • M1 (Refine) brown wrap
  • M1 (Refine) gold wrap
  • M1 (Refine) chrome wrap
  • M1 (Refine) color shift wrap
  • M1 (Refine) carbon fiber wrap
  • M1 (Refine) camo and patterned wrap

How much vinyl to wrap a JAC M1 (Refine)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2011van (4 doors)186.6 in (4,740 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

M1 (Refine) wrap cost factors

The M1 (Refine) wrap cost depends on the film type, the number of panels and the prep work on a 186.6 in (4,740 mm) body. A standard color change uses about 70 ft (21.5 m) of cast film, while chrome or patterned film adds around 10 ft (3 m) more. Sliding door tracks and the tall roof add labor, so the final quote reflects that extra handling.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (76.8 in (1,950 mm)): the roof is wrapped from a platform.

M1 (Refine) wraps by generation

Swipe sideways. Tap a card for the full description.

JAC M1 (Refine), first generation, factory photo
Factory color shown

2006–2011 M1 (Refine) van (first generation)

2006–2011van (4 doors)186.6 in (4,740 mm)

The first generation JAC M1 (Refine), built from 2006 to 2011, is a four-door van with sliding side doors. The tracks for those doors stay free of film, and the cut line follows the track edge for a neat finish. Its 186.6 in (4,740 mm) length and 76.8 in (1,950 mm) height set the wrap area for this body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.8 in (1,950 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an M1 (Refine)

An M1 (Refine) chrome delete involves covering the window trim and badges with black film, and the sliding door tracks stay untouched. A partial wrap on this van can be just the roof, the hood or the mirror caps. Paint protection film (PPF) as a clear front-end kit is another way to protect the leading surfaces without a color change.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a JAC M1 (Refine): body, cut-outs and film

A JAC M1 (Refine) vinyl wrap has to span a 186.6 in (4,740 mm) long van body with four doors. The tall roofline of 76.8 in (1,950 mm) means installers work from a platform to reach the top panels. This single-box minivan shape keeps panel count moderate for its size, but the large side areas need careful film handling.

The sliding side doors shape many M1 (Refine) wrap ideas because the door tracks stay bare and the film is cut along them. The roof needs wrapping from a platform, so access planning matters before the job starts. Other usual steps are removing door handles, mirrors and badges for clean edges.

To know how much vinyl to wrap an M1 (Refine), count one generation: 2006–2011 models share the same body dimensions. No facelift changed the overall length or height during the run. The film estimate of about 70 ft (21.5 m) stays the same for any van from these years.

Questions about wrapping a JAC M1 (Refine)

How much vinyl does it take to wrap a JAC M1 (Refine)?

It takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film to wrap a JAC M1 (Refine). For chrome or patterned film, plan on about 80 ft (24.5 m). These figures fit the 2006–2011 first-generation body.

Are the sliding doors of an M1 (Refine) wrapped?

The sliding doors of an M1 (Refine) are wrapped on the door panels, but the tracks stay bare. The film is cut along the track edges so the door still slides freely.

Can I wrap only the hood or the roof of an M1 (Refine)?

Yes, you can wrap only the hood or the roof of an M1 (Refine). The roof is a common partial job, though the tall body means working from a platform. Other partial options include the mirror caps and a chrome delete on the window trim and badges.

Is an M1 (Refine) hard to wrap?

An M1 (Refine) is not the hardest van to wrap, but the sliding door tracks and the 76.8 in (1,950 mm) height add labor. The roof needs a platform, and the film must be trimmed neatly along the bare tracks. Its 186.6 in (4,740 mm) length also means long side panels.