Wraps by car

Lamborghini 350/400 GT wrap

A Lamborghini 350/400 GT wrap is a color change or paint protection project for the first series of Lamborghini grand tourers, built as a two-door coupe from 1964 to 1968. The catalog covers the single generation of this model, which appeared in two variants: the 350 GT and the 400 GT. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds material, with a total around 54 ft (16.5 m).

1generations15 mof film for a full wrap

Lamborghini 350/400 GT, first generation, factory photo
Lamborghini 350/400 GT, first generation. Factory color shown.

Lamborghini 350/400 GT wrap colors and ideas

  • 350/400 GT black wrap
  • 350/400 GT white wrap
  • 350/400 GT gray wrap
  • 350/400 GT silver wrap
  • 350/400 GT red wrap
  • 350/400 GT blue wrap
  • 350/400 GT green wrap
  • 350/400 GT yellow wrap
  • 350/400 GT orange wrap
  • 350/400 GT purple wrap
  • 350/400 GT pink wrap
  • 350/400 GT teal wrap
  • 350/400 GT brown wrap
  • 350/400 GT gold wrap
  • 350/400 GT chrome wrap
  • 350/400 GT color shift wrap
  • 350/400 GT carbon fiber wrap
  • 350/400 GT camo and patterned wrap

How much vinyl to wrap a Lamborghini 350/400 GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1968coupe (2 doors)176.0 in (4,470 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

350/400 GT wrap cost factors

The 350/400 GT wrap cost depends on the film you choose and the condition of the car. A standard color change on the 176.0 in (4,470 mm) coupe uses about 49 ft (15 m) of 60-inch (1.52 m) film, while chrome or patterned film pushes the amount to about 54 ft (16.5 m). The size of the job also matters, because a full wrap takes more labor than a partial one. Paint condition is a factor on a car from 1964 to 1968, because old or damaged paint may need more preparation.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

350/400 GT wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini 350/400 GT, first generation, factory photo
Factory color shown

1964–1968 350/400 GT coupe (first generation)

1964–1968coupe (2 doors)176.0 in (4,470 mm)

The first-generation Lamborghini 350/400 GT was built from 1964 to 1968 as a two-door coupe. Paint on these cars is often original or has been repainted, so a test spot is needed before a full wrap. A test spot checks that the film will adhere well to the old paint. The long side doors are each one large piece of film, which makes the job easier than on cars with many small panels.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a 350/400 GT

A partial wrap on a 350/400 GT can cover the roof, hood, or mirror caps. Chrome delete is another option, covering the window trim and badges with black film to change the bright trim. Paint protection film (PPF) in clear form is often applied to the front end to protect the nose from stone chips. These smaller jobs use less material and can be a first step before a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lamborghini 350/400 GT: body, cut-outs and film

Body style and size shape the work on a Lamborghini 350/400 GT vinyl wrap. This is a two-door coupe with a length of 176.0 in (4,470 mm), so the main surfaces are large and continuous. Each of the two long side doors can be wrapped as one piece of film, which reduces seams. The roof, hood, and rear quarters are also sizable panels that need careful handling.

Good 350/400 GT wrap ideas start with the original lines and brightwork. The window trim and badges are common points for a chrome delete, where bright trim is covered with black film. The bumpers on this car are also chrome and can be wrapped or left alone. Door handles and mirrors are small parts that can be wrapped for a uniform look.

When you ask how much vinyl to wrap a 350/400 GT, the generation matters. This page covers only the first generation, built from 1964 to 1968. A full wrap of the 350 GT or the 400 GT uses about 49 ft (15 m) of 60-inch (1.52 m) film. Many installers add five to ten percent for waste, so buying a little extra film is wise.

Questions about wrapping a Lamborghini 350/400 GT

How much vinyl does it take to wrap a Lamborghini 350/400 GT?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Lamborghini 350/400 GT. This figure is for a full color change wrap on the newest body of the first generation. If you use chrome or patterned film, plan for about 54 ft (16.5 m) because those films have less stretch.

Can I wrap only the hood or the roof of a 350/400 GT?

Yes, you can wrap only the hood or the roof of a 350/400 GT. A partial wrap on this car can cover the roof, hood, or mirror caps. The hood and roof are flat enough to wrap without removing parts. A partial job uses less film and takes less time than a full wrap.

Is a 350/400 GT hard to wrap?

A 350/400 GT is less hard to wrap than many older cars, but it still has tricky points. The car is a two-door coupe at 176.0 in (4,470 mm) long, so the panels are large and need careful handling. Each long side door is one large piece of film, which can be difficult to position without creases. The chrome trim and badges add time if you want a clean edge around them.

How many generations of the 350/400 GT does this page cover?

This page covers one generation of the Lamborghini 350/400 GT. The first generation was built from 1964 to 1968 as a two-door coupe. There are no other generations in this catalog.