Wraps by car

Lamborghini Espada wrap

This page covers the Lamborghini Espada wrap in vinyl film. The Lamborghini Espada is a classic sports car produced in one generation, from 1968 to 1981. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Lamborghini Espada, first generation, factory photo
Lamborghini Espada, first generation. Factory color shown.

Lamborghini Espada wrap colors and ideas

  • Espada black wrap
  • Espada white wrap
  • Espada gray wrap
  • Espada silver wrap
  • Espada red wrap
  • Espada blue wrap
  • Espada green wrap
  • Espada yellow wrap
  • Espada orange wrap
  • Espada purple wrap
  • Espada pink wrap
  • Espada teal wrap
  • Espada brown wrap
  • Espada gold wrap
  • Espada chrome wrap
  • Espada color shift wrap
  • Espada carbon fiber wrap
  • Espada camo and patterned wrap

How much vinyl to wrap a Lamborghini Espada

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1981coupe (2 doors)184.0 in (4,674 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Espada wrap cost factors

Espada wrap cost depends on the size of the car and the condition of its paint. The Espada is 184.0 in (4,674 mm) long, which sets the amount of film needed for the large panels. Paint age matters on a car from 1968 to 1981, because original or repainted panels may need prep work. A test spot is done before a full wrap to check how the film adheres.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Espada wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini Espada, first generation, factory photo
Factory color shown

1968–1981 Espada coupe (first generation)

1968–1981coupe (2 doors)184.0 in (4,674 mm)

The first generation Lamborghini Espada was built from 1968 to 1981 as a coupe with two doors. Paint age on a car of these years can vary, with panels either original or repainted. An installer runs a test spot before a full wrap to see how the old paint reacts. That step shows if the paint is stable enough for the film.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Espada

On a Lamborghini Espada a partial wrap covers the roof, the hood, or the mirror caps. An Espada chrome delete uses black film to cover the bright window trim and badges. Paint protection film (PPF) is clear film installed on the front end to guard against stone chips. Each of these jobs is smaller than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lamborghini Espada: body, cut-outs and film

A Lamborghini Espada vinyl wrap works with a single coupe body style that has two long doors. The car measures 184.0 in (4,674 mm) in length, which means the installer handles large side panels. The two side doors are each one large piece of film, so the wrap uses a single unbroken panel per door. This size calls for careful film alignment and two-person handling on the doors.

Espada wrap ideas often focus on the two long side doors, because each door is covered with one large piece of film. A partial wrap can cover the roof, hood, and mirror caps. A chrome delete changes the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

How much vinyl to wrap an Espada depends on the body style, and this model has only one generation. The production run from 1968 to 1981 kept the same coupe shape and the same dimensions. For film estimates there is no change between years, so one figure covers every Espada. Counting film is therefore simple: the full wrap takes about 51 ft (15.5 m) of cast film.

Questions about wrapping a Lamborghini Espada

How much vinyl does it take to wrap a Lamborghini Espada?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Lamborghini Espada. This figure covers the full exterior of the coupe body from 1968 to 1981. The large side panels and the long doors use most of that film.

Can I wrap only the hood or the roof of an Espada?

Yes, you can wrap only the hood or the roof of an Espada. A partial wrap on this car can cover the roof, the hood, or the mirror caps separately. The long hood and large roof are each big enough to wrap on their own.

Is an Espada hard to wrap?

The Espada has some points that add work, but it is not unusually hard for a trained installer. The 184.0 in (4,674 mm) length and the two long side doors each need large pieces of film. Those doors are each one single piece, which makes handling and alignment more demanding.

How many generations of the Espada does this page cover?

This page covers one generation of the Lamborghini Espada, produced from 1968 to 1981. That single generation includes all Espada models, so every car on this page falls under the same body data.