Wraps by car

Lamborghini Silhouette wrap

This page covers the Lamborghini Silhouette wrap, a vinyl wrap for the first generation produced from 1976 to 1979. The catalog includes one generation of this targa two-door car. A full wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Lamborghini Silhouette, first generation, factory photo
Lamborghini Silhouette, first generation. Factory color shown.

Lamborghini Silhouette wrap colors and ideas

  • Silhouette black wrap
  • Silhouette white wrap
  • Silhouette gray wrap
  • Silhouette silver wrap
  • Silhouette red wrap
  • Silhouette blue wrap
  • Silhouette green wrap
  • Silhouette yellow wrap
  • Silhouette orange wrap
  • Silhouette purple wrap
  • Silhouette pink wrap
  • Silhouette teal wrap
  • Silhouette brown wrap
  • Silhouette gold wrap
  • Silhouette chrome wrap
  • Silhouette color shift wrap
  • Silhouette carbon fiber wrap
  • Silhouette camo and patterned wrap

How much vinyl to wrap a Lamborghini Silhouette

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1976–1979targa (2 doors)170.1 in (4,320 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Silhouette wrap cost factors

Silhouette wrap cost depends on the amount of film, which is about 41 ft (12.5 m) for a full wrap, and the labor for the targa edges. The wrap_facts show that the fabric top is not wrapped, so the film ends where it begins, adding time to trim those edges. A folding hard top wrapped as panels of its own also increases the work. The car's 170.1 in (4,320 mm) length is standard for a two-door, so the main cost driver is the careful cutting around the roof.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Silhouette wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini Silhouette, first generation, factory photo
Factory color shown

1976–1979 Silhouette targa (first generation)

1976–1979targa (2 doors)170.1 in (4,320 mm)

The open top of the first generation Silhouette means the fabric top is not wrapped; the film ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. The vinyl is cut to stop at the roof opening, leaving the fabric exposed. This design keeps the wrap from peeling at the moving edges.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Silhouette

For a smaller job on a Lamborghini Silhouette, a partial wrap covers the hood, mirror caps, and rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lamborghini Silhouette: body, cut-outs and film

A Lamborghini Silhouette vinyl wrap must follow the targa body style, where the fabric top is not wrapped and the film ends where it begins. The car is 170.1 in (4,320 mm) long, so the film is cut to cover the main body panels. A folding hard top is wrapped as panels of its own, adding to the work. The two-door layout means the doors are large and use film efficiently.

Silhouette wrap ideas start with the targa body, where cut-outs are needed around the fabric top seals. The film ends where the top begins, so the edges must be trimmed carefully at the roof line. Door handles and badges are removed before the vinyl is applied. The rear deck and hood require simple, flat cuts.

To figure out how much vinyl to wrap a Silhouette, the first generation from 1976 to 1979 is the only body to count. A full wrap uses about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 51 ft (15.5 m). The targa top does not reduce the amount because the film still wraps the side panels and rear deck.

Questions about wrapping a Lamborghini Silhouette

How much vinyl does it take to wrap a Lamborghini Silhouette?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Lamborghini Silhouette. For chrome or patterned film, the amount is about 51 ft (15.5 m). This is based on the first generation, which is the only body in the catalog.

Is the top of a Silhouette wrapped?

No, the fabric top of a Silhouette is not wrapped; the film ends where the top begins. A folding hard top, if fitted, is wrapped as panels of its own. The targa design means the vinyl stops at the roof opening.

Can I wrap only the hood or the roof of a Silhouette?

Yes, you can wrap only the hood or the roof of a Silhouette as a partial wrap. A partial wrap on this car covers the hood, mirror caps, and rear deck. Chrome delete covers the window trim and badges, and paint protection film (PPF) is a clear film on the front end.

Is a Silhouette hard to wrap?

Yes, a Silhouette is hard to wrap because the targa body has a fabric top that is not wrapped, so the film must end cleanly where it begins. The car's 170.1 in (4,320 mm) length is not unusual, but the folding hard top, if present, is wrapped as panels of its own, adding labor. The edges around the roof opening need precise cutting to avoid lifting.