Wraps by car

Lamborghini Huracan Sterrato wrap

This page covers a vinyl wrap for the Lamborghini Huracan Sterrato, a sports car produced from 2022 to now. The catalog includes one generation of this model, a coupe with two doors. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Lamborghini Huracan Sterrato, first generation, factory photo
Lamborghini Huracan Sterrato, first generation. Factory color shown.

Lamborghini Huracan Sterrato wrap colors and ideas

  • Huracan Sterrato black wrap
  • Huracan Sterrato white wrap
  • Huracan Sterrato gray wrap
  • Huracan Sterrato silver wrap
  • Huracan Sterrato red wrap
  • Huracan Sterrato blue wrap
  • Huracan Sterrato green wrap
  • Huracan Sterrato yellow wrap
  • Huracan Sterrato orange wrap
  • Huracan Sterrato purple wrap
  • Huracan Sterrato pink wrap
  • Huracan Sterrato teal wrap
  • Huracan Sterrato brown wrap
  • Huracan Sterrato gold wrap
  • Huracan Sterrato chrome wrap
  • Huracan Sterrato color shift wrap
  • Huracan Sterrato carbon fiber wrap
  • Huracan Sterrato camo and patterned wrap

How much vinyl to wrap a Lamborghini Huracan Sterrato

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowcoupe (2 doors)178.1 in (4,525 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Huracan Sterrato wrap cost factors

Huracan Sterrato wrap cost depends on the size of the car, which is 178.1 in (4,525 mm) long, and on the film chosen. A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, and chrome or patterned film raises the amount to about 56 ft (17 m). The number of pieces and the need to remove parts also affect the labor and therefore the total cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Huracan Sterrato wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini Huracan Sterrato, first generation, factory photo
Factory color shown

2022–now Huracan Sterrato coupe (first generation)

2022–nowcoupe (2 doors)178.1 in (4,525 mm)

The first generation Lamborghini Huracan Sterrato is a coupe that measures 178.1 in (4,525 mm) long. Its two long side doors are each one large piece of film, which simplifies the side panels but requires careful handling of large sheets. The roof and hood are moderately sized, so a full wrap fits within about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Huracan Sterrato

A partial wrap on a Lamborghini Huracan Sterrato can cover the roof, the hood, or the mirror caps as separate jobs. Huracan Sterrato chrome delete means covering the window trim and badges with black film, which uses small pieces and precise trimming. Paint protection film (PPF) in a clear layer is often applied to the front end to guard the bumper, hood edge, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lamborghini Huracan Sterrato: body, cut-outs and film

A Lamborghini Huracan Sterrato vinyl wrap is sized around the coupe body, which measures 178.1 in (4,525 mm) long. The two long side doors are each one large piece of film, so the installer needs wide, uncut sections for the flanks. The roof and the hood are relatively flat, but the rear haunches and front bumper have deep shapes that use extra material for stretching.

Huracan Sterrato wrap ideas start with the two long side doors, which are each one large piece of film and give a clean canvas for a bold color. The mirror caps, door handles, and badges are separate small pieces, and the front and rear bumpers need cut-outs for sensors and lights. The roof rails and the skid plates can be left uncovered or wrapped to match.

How much vinyl to wrap a Huracan Sterrato depends on the body size, which is 178.1 in (4,525 mm) long for the single generation in production since 2022. A standard color change uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 56 ft (17 m) because of pattern matching and extra waste. The two long doors account for a large share of the material.

Questions about wrapping a Lamborghini Huracan Sterrato

How much vinyl does it take to wrap a Lamborghini Huracan Sterrato?

A full wrap of a Lamborghini Huracan Sterrato takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl film. If you choose chrome or patterned film, plan for about 56 ft (17 m) to allow for pattern matching and waste.

Can I wrap only the hood or the roof of a Huracan Sterrato?

Yes, you can wrap only the hood or the roof of a Huracan Sterrato. Partial wrap jobs on this car often include the roof, hood, and mirror caps, and a chrome delete covers the window trim and badges.

Is a Huracan Sterrato hard to wrap?

A Huracan Sterrato is not especially hard to wrap, but its two long side doors mean each door is one large piece of film, so the installer must handle wide sheets. The body length of 178.1 in (4,525 mm) and the deep bumpers add to the labor, but the flat surfaces are manageable.

How many generations of the Huracan Sterrato does this page cover?

This page covers one generation of the Huracan Sterrato, produced from 2022 to now. The body style is a coupe with two doors.