Wraps by car

Lamborghini Sesto Elemento wrap

This page covers a vinyl wrap for the Lamborghini Sesto Elemento, a limited-run sports car built for one generation from 2010 to 2011. The newest body is a two-door coupe that measures 188.2 in (4,780 mm) long. A full wrap of that body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or about 61 ft (18.5 m) if you choose chrome or patterned film.

1generations14.5 mof film for a full wrap

Lamborghini Sesto Elemento, first generation, factory photo
Lamborghini Sesto Elemento, first generation. Factory color shown.

Lamborghini Sesto Elemento wrap colors and ideas

  • Sesto Elemento black wrap
  • Sesto Elemento white wrap
  • Sesto Elemento gray wrap
  • Sesto Elemento silver wrap
  • Sesto Elemento red wrap
  • Sesto Elemento blue wrap
  • Sesto Elemento green wrap
  • Sesto Elemento yellow wrap
  • Sesto Elemento orange wrap
  • Sesto Elemento purple wrap
  • Sesto Elemento pink wrap
  • Sesto Elemento teal wrap
  • Sesto Elemento brown wrap
  • Sesto Elemento gold wrap
  • Sesto Elemento chrome wrap
  • Sesto Elemento color shift wrap
  • Sesto Elemento carbon fiber wrap
  • Sesto Elemento camo and patterned wrap

How much vinyl to wrap a Lamborghini Sesto Elemento

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2011coupe (2 doors)188.2 in (4,780 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Sesto Elemento wrap cost factors

Sesto Elemento wrap cost depends on the film you pick, the condition of the panels, and how much of the car you cover. A full wrap of this coupe takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 61 ft (18.5 m). The two long doors are large single pieces, so a shop may charge more for careful stretching and trimming than for a car with smaller panels.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Sesto Elemento wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini Sesto Elemento, first generation, factory photo
Factory color shown

2010–2011 Sesto Elemento coupe (first generation)

2010–2011coupe (2 doors)188.2 in (4,780 mm)

The first generation Lamborghini Sesto Elemento, produced from 2010 to 2011, is a two-door coupe that is 188.2 in (4,780 mm) long. On a car of these years, paint may be original or repainted, so a wrap installer tests a small spot before a full wrap. If the paint is weak, the film can lift flakes when it is repositioned or removed, and that risk changes how the job is quoted.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Sesto Elemento

A partial wrap on a Lamborghini Sesto Elemento can cover the roof, the hood, or the mirror caps. For a chrome delete, the wrap installer covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lamborghini Sesto Elemento: body, cut-outs and film

A Lamborghini Sesto Elemento vinyl wrap starts with a coupe body that is 188.2 in (4,780 mm) long and has two long side doors. Each door is one large piece of film, which keeps the side profile clean but demands careful handling. The single body style means you plan for one roofline, one set of rockers, and one front and rear bumper set.

Sesto Elemento wrap ideas often begin with the two long side doors, because each door is one large piece of film that shows off a color change or a pattern without seams. For cut-outs, the wrap installer removes the door handles, mirrors, and badges before film goes on. The front and rear bumpers have grilles and vents that need relief cuts, and the engine cover may come off for a neater edge.

To figure how much vinyl to wrap a Sesto Elemento, you only need to plan for one generation, built from 2010 to 2011. The coupe length of 188.2 in (4,780 mm) stays the same across that run, so the film estimate of about 48 ft (14.5 m) of 60-inch (1.52 m) cast film holds for every car. If you want chrome or patterned film, add about 13 ft (4 m) to the total.

Questions about wrapping a Lamborghini Sesto Elemento

How much vinyl does it take to wrap a Lamborghini Sesto Elemento?

A full wrap of a Lamborghini Sesto Elemento takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the job needs about 61 ft (18.5 m) of the same width.

Can I wrap only the hood or the roof of a Sesto Elemento?

Yes, you can wrap only the hood or the roof of a Sesto Elemento. A partial wrap may also cover the mirror caps, and a chrome delete covers the window trim and badges with black film.

Is a Sesto Elemento hard to wrap?

Yes, a Sesto Elemento is hard to wrap because its two long side doors are each one large piece of film that must be stretched without wrinkles. The coupe is 188.2 in (4,780 mm) long, so the installer also has to manage long panels on the bumpers and rockers.

How many generations of the Sesto Elemento does this page cover?

This page covers one generation of the Lamborghini Sesto Elemento, built from 2010 to 2011. The body is a two-door coupe that measures 188.2 in (4,780 mm) long.