Wraps by car

Lamborghini Jalpa wrap

The Lamborghini Jalpa wrap is a vinyl color change for one of the few V8 Lamborghinis, built as a single generation from 1981 to 1988. This targa sports car takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. A chrome or patterned film needs more material, about 51 ft (15.5 m). We cover the car's body, its open top, and the film amounts for each job.

1generations12.5 mof film for a full wrap

Lamborghini Jalpa, first generation, factory photo
Lamborghini Jalpa, first generation. Factory color shown.

Lamborghini Jalpa wrap colors and ideas

  • Jalpa black wrap
  • Jalpa white wrap
  • Jalpa gray wrap
  • Jalpa silver wrap
  • Jalpa red wrap
  • Jalpa blue wrap
  • Jalpa green wrap
  • Jalpa yellow wrap
  • Jalpa orange wrap
  • Jalpa purple wrap
  • Jalpa pink wrap
  • Jalpa teal wrap
  • Jalpa brown wrap
  • Jalpa gold wrap
  • Jalpa chrome wrap
  • Jalpa color shift wrap
  • Jalpa carbon fiber wrap
  • Jalpa camo and patterned wrap

How much vinyl to wrap a Lamborghini Jalpa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1988targa (2 doors)170.5 in (4,330 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Jalpa wrap cost factors

Jalpa wrap cost depends on the size of the job, the film type, and the work that the 170.5 in (4,330 mm) body requires. A full wrap uses about 41 ft (12.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 51 ft (15.5 m). The targa top adds extra panels if it is a folding hard top. The labor changes with how many parts must be removed for cut-outs.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Jalpa wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini Jalpa, first generation, factory photo
Factory color shown

1981–1988 Jalpa targa (first generation)

1981–1988targa (2 doors)170.5 in (4,330 mm)

The Lamborghini Jalpa's open top is a key part of any wrap plan. A fabric top is not wrapped, and the vinyl ends where the fabric begins. If the car has a folding hard top, the installer wraps it as separate panels of its own. This keeps the lines of the targa body clean.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Jalpa

Partial wrap options for the Jalpa include the hood, mirror caps, and rear deck. A chrome delete (bright trim covered with black film) covers window trim and badges. Paint protection film (PPF) can be applied to the front end as clear film. Each job uses less film than a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lamborghini Jalpa: body, cut-outs and film

The Lamborghini Jalpa vinyl wrap follows a targa body with two doors and a length of 170.5 in (4,330 mm). Its short, angled panels allow a full wrap to use about 41 ft (12.5 m) of 60-inch (1.52 m) film. The open top means the film does not continue over a roof panel. Installers cut the material to end where the targa top begins.

Jalpa wrap ideas should account for the targa body's separate fabric or folding hard top. A fabric top is not wrapped, and the vinyl ends where the top begins. A folding hard top gets wrapped as panels of its own. The film also needs cut-outs around door handles, lights, and the engine cover.

Knowing how much vinyl to wrap a Jalpa means looking at its single generation from 1981 to 1988. The body stayed the same size across those years. Every Jalpa therefore uses the same film estimate of about 41 ft (12.5 m) for a full wrap. Buyers planning a chrome or patterned film should order about 51 ft (15.5 m).

Questions about wrapping a Lamborghini Jalpa

How much vinyl does it take to wrap a Lamborghini Jalpa?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Lamborghini Jalpa. A chrome or patterned film requires more material, about 51 ft (15.5 m). This estimate covers the full body of the only generation produced from 1981 to 1988.

Is the top of a Jalpa wrapped?

No, the fabric top of a Jalpa is not wrapped. The vinyl ends where the fabric top begins. If the Jalpa has a folding hard top, that top is wrapped as separate panels.

Can I wrap only the hood or the roof of a Jalpa?

Yes, you can wrap only the hood or the rear deck of a Jalpa. A partial wrap can include the hood, mirror caps, or rear deck. A chrome delete covers window trim and badges, and paint protection film (PPF) protects the front end.

Is a Jalpa hard to wrap?

Yes, a Jalpa is relatively hard to wrap because of its targa top and angled body. The open top means the installer must end the film cleanly where the top begins. A folding hard top adds separate panels to cover. The body is small at 170.5 in (4,330 mm), but the many cut-outs for lights and handles add work.