Wraps by car

Lamborghini Countach wrap

This page covers the Lamborghini Countach wrap across its two generations. The vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The first generation needs about 43 ft (13 m) of the same film. Both bodies are two-door coupes.

2generations

Lamborghini Countach, second generation, factory photo
Lamborghini Countach, second generation. Factory color shown.

Lamborghini Countach wrap colors and ideas

  • Countach black wrap
  • Countach white wrap
  • Countach gray wrap
  • Countach silver wrap
  • Countach red wrap
  • Countach blue wrap
  • Countach green wrap
  • Countach yellow wrap
  • Countach orange wrap
  • Countach purple wrap
  • Countach pink wrap
  • Countach teal wrap
  • Countach brown wrap
  • Countach gold wrap
  • Countach chrome wrap
  • Countach color shift wrap
  • Countach carbon fiber wrap
  • Countach camo and patterned wrap

How much vinyl to wrap a Lamborghini Countach

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowcoupe (2 doors)——
1974–1991coupe (2 doors)163.0 in (4,140 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Countach wrap cost factors

Countach wrap cost depends on the film amount, body size, and installation time. The first generation uses about 43 ft (13 m) of 60-inch (1.52 m) film, while the newest body uses about 48 ft (14.5 m). The two long side doors each need one large piece, which adds labor. The car's low, angular shape also increases installer time.

  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Countach wraps by generation

Swipe sideways. Tap a card for the full description.

Lamborghini Countach, second generation, factory photo
Factory color shown

2021–now Countach coupe (second generation)

2021–nowcoupe (2 doors)

The second generation Lamborghini Countach is a two-door coupe with a low, wide stance. Its two long side doors each take one large piece of film, reducing the number of visible seams. The body has sharp lines and deep intakes that require careful cutting and heating. A full wrap of this body uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Lamborghini Countach, first generation, factory photo
Factory color shown

1974–1991 Countach coupe (first generation)

1974–1991coupe (2 doors)163.0 in (4,140 mm)

The first generation Lamborghini Countach was produced from 1974 to 1991 and measures 163.0 in (4,140 mm) long. Its two long side doors are each one large piece of film. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. A full wrap needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, or about 48 ft (14.5 m) for chrome or patterned film.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Countach

A partial wrap on a Countach can cover the roof, hood, or mirror caps. Countach chrome delete is a common choice, with window trim and badges covered in black film. Paint protection film (PPF) is another option: clear film on the front end. These jobs use less material than a full wrap and focus on high-impact areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lamborghini Countach: body, cut-outs and film

A Lamborghini Countach vinyl wrap is planned around its coupe body and long side doors. Each door is one large piece of film, which keeps the panel count low. The newest body has no stated length, but the first generation measures 163.0 in (4,140 mm). A full wrap therefore uses fewer, larger panels than a typical sedan.

Countach wrap ideas start with the two long side doors, each covered by one large piece of film. The door handles, mirrors, and badges need cut-outs or come off during installation. The low nose and wide rear arches require careful stretching of the film. A skilled installer works these areas without seams.

How much vinyl to wrap a Countach changes between the two generations. The 1974–1991 body needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. The 2021–now body needs about 48 ft (14.5 m) of the same film. Chrome or patterned film adds about 5 ft (1.5 m) on the first generation.

Questions about wrapping a Lamborghini Countach

How much vinyl does it take to wrap a Lamborghini Countach?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap a Lamborghini Countach of the newest body. The first generation needs about 43 ft (13 m) of the same film. Chrome or patterned film on the first generation takes about 48 ft (14.5 m).

Can I wrap only the hood or the roof of a Countach?

Yes, you can wrap only the hood or the roof of a Countach. A partial wrap can cover the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges. Paint protection film (PPF) is available as clear film on the front end.

Is a Countach hard to wrap?

Yes, the Countach is hard to wrap because of its size and sharp body lines. The car has two long side doors, each requiring one large piece of film that is difficult to handle. The low nose, wide arches, and deep intakes demand careful stretching and cutting. Installers need experience with high-end sports cars.

How many generations of the Countach does this page cover?

This page covers two generations of the Lamborghini Countach. The first generation ran from 1974 to 1991. The second generation has been produced from 2021 to now.