Wraps by car

Triumph 2500 wrap

The Triumph 2500 wrap page covers the full first generation of this sedan, produced from 1963 to 1969. A complete vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The page lists the body styles, the wrap film estimate, and the jobs smaller than a full wrap.

1generations15.5 mof film for a full wrap

Triumph 2500, first generation, factory photo
Triumph 2500, first generation. Factory color shown.

Triumph 2500 wrap colors and ideas

  • Triumph 2500 black wrap
  • Triumph 2500 white wrap
  • Triumph 2500 gray wrap
  • Triumph 2500 silver wrap
  • Triumph 2500 red wrap
  • Triumph 2500 blue wrap
  • Triumph 2500 green wrap
  • Triumph 2500 yellow wrap
  • Triumph 2500 orange wrap
  • Triumph 2500 purple wrap
  • Triumph 2500 pink wrap
  • Triumph 2500 teal wrap
  • Triumph 2500 brown wrap
  • Triumph 2500 gold wrap
  • Triumph 2500 chrome wrap
  • Triumph 2500 color shift wrap
  • Triumph 2500 carbon fiber wrap
  • Triumph 2500 camo and patterned wrap

How much vinyl to wrap a Triumph 2500

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1969sedan (4 doors)183.3 in (4,655 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Triumph 2500 wrap cost factors

The Triumph 2500 wrap cost depends on the film you pick, the condition of the paint, and how much of the 183.3 in (4,655 mm) body you cover. A full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, so a larger car needs more material than a smaller one. Chrome and patterned films add waste because the installer must align the pattern across the panels.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Triumph 2500 wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph 2500, first generation, factory photo
Factory color shown

1963–1969 Triumph 2500 sedan (first generation)

1963–1969sedan (4 doors)183.3 in (4,655 mm)

The first generation Triumph 2500 was produced from 1963 to 1969, and paint age is a real point for a wrap on a car of these years. Panels may be original or repainted, and film does not stick well to failing paint. A test spot on a small area comes before a full wrap to check adhesion.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Triumph 2500

On a Triumph 2500, a partial wrap can cover the roof, hood, or mirror caps without wrapping the whole sedan. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph 2500: body, cut-outs and film

A Triumph 2500 vinyl wrap covers one body style, a four-door sedan with a length of 183.3 in (4,655 mm). The long roofline and four door openings mean the installer uses most of the film on the large side panels. Since the body is longer than many modern sedans, a full wrap uses more material than a compact car.

Triumph 2500 wrap ideas often start with the parts that need cut-outs or come off: door handles, badges, window trim, and the front grille. The sedan body has chrome bumpers and trim that add time for masking or removal. For a clean install, the mirror caps and antenna come off before the film goes on.

To work out how much vinyl to wrap a Triumph 2500, count one generation with a single body: the 1963–1969 four-door sedan. The film estimate is about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a standard color change. If you choose chrome or patterned film, plan for about 64 ft (19.5 m) to match the pattern.

Questions about wrapping a Triumph 2500

How much vinyl does it take to wrap a Triumph 2500?

A Triumph 2500 needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is for the 1963–1969 four-door sedan, the only body style of this generation. Chrome or patterned film adds about 64 ft (19.5 m) because of pattern matching.

Can I wrap only the hood or the roof of a Triumph 2500?

Yes, you can wrap only the hood or the roof of a Triumph 2500. A partial wrap on this sedan covers the roof, hood, or mirror caps as separate jobs. The shop also offers chrome delete for the window trim and badges, and clear paint protection film for the front end.

Is a Triumph 2500 hard to wrap?

The Triumph 2500 is a long sedan at 183.3 in (4,655 mm), and that size adds work for a full wrap. The installer removes or masks chrome trim, badges, door handles, and the mirror caps before laying the film. A test spot on the paint is a must on a car from 1963–1969 because of age and possible repaints.

How many generations of the Triumph 2500 does this page cover?

This page covers one generation of the Triumph 2500, the first generation from 1963 to 1969. There is only one body style in this generation: a four-door sedan. All film estimates on the page refer to that sedan.