Wraps by car

Triumph TR7 wrap

This page covers the Triumph TR7 wrap, a vinyl wrap for the 1975–1981 sports car. The catalog lists one generation, offered as a convertible and a coupe. A full wrap of the newest body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film for the convertible and 43 ft (13 m) for the coupe.

1generations13 mof film for a full wrap

Triumph TR7, first generation, factory photo
Triumph TR7, first generation. Factory color shown.

Triumph TR7 wrap colors and ideas

  • Triumph TR7 black wrap
  • Triumph TR7 white wrap
  • Triumph TR7 gray wrap
  • Triumph TR7 silver wrap
  • Triumph TR7 red wrap
  • Triumph TR7 blue wrap
  • Triumph TR7 green wrap
  • Triumph TR7 yellow wrap
  • Triumph TR7 orange wrap
  • Triumph TR7 purple wrap
  • Triumph TR7 pink wrap
  • Triumph TR7 teal wrap
  • Triumph TR7 brown wrap
  • Triumph TR7 gold wrap
  • Triumph TR7 chrome wrap
  • Triumph TR7 color shift wrap
  • Triumph TR7 carbon fiber wrap
  • Triumph TR7 camo and patterned wrap

How much vinyl to wrap a Triumph TR7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1981convertible, coupe (2 doors)160.0 in (4,064 mm)about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m)

Triumph TR7 wrap cost factors

The Triumph TR7 wrap cost depends on the body style and the film used. A full wrap of the convertible takes about 39 ft (12 m) of 60-inch (1.52 m) cast film, and the coupe takes 43 ft (13 m). Chrome or patterned film can raise the material estimate to about 49 ft (15 m). The two long side doors add one large piece of film per door, which affects film use.

  • Film for a full wrap: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Triumph TR7 wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph TR7, first generation, factory photo
Factory color shown

1975–1981 Triumph TR7 convertible, coupe (first generation)

1975–1981convertible, coupe (2 doors)160.0 in (4,064 mm)

The open top of the first generation Triumph TR7 is not wrapped when it is a fabric top. The film on the body ends where the fabric begins, leaving the top in its original material. A folding hard top, if fitted, is wrapped as separate panels of its own. The two side doors are each one large piece of film, so edges are minimized.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Triumph TR7

A partial wrap on a Triumph TR7 covers the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) puts clear film on the front end. These jobs use less material than a full wrap of the convertible or coupe.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph TR7: body, cut-outs and film

The Triumph TR7 vinyl wrap is planned around its two body styles and their sizes. The 160.0 in (4,064 mm) length is compact, so film usage stays low for a full color change. The convertible and coupe share the same body panels below the beltline, which keeps cutting patterns consistent. Each style has two long side doors that take one large piece of film per door.

Triumph TR7 wrap ideas start with handling the fabric top and the long side doors. The convertible fabric top is not wrapped, and the film on the body ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. Each side door is covered with one large piece of film to reduce seams.

How much vinyl to wrap a Triumph TR7 depends on the body style, not on changes between generations. The catalog has one generation, built from 1975 to 1981, so film figures stay the same for all years. A coupe needs about 43 ft (13 m), while a convertible needs about 39 ft (12 m). Adding chrome or patterned film can bring the estimate up to about 49 ft (15 m).

Questions about wrapping a Triumph TR7

How much vinyl does it take to wrap a Triumph TR7?

About 39 ft (12 m) of 60-inch (1.52 m) cast film for the convertible or 43 ft (13 m) for the coupe. The coupe has a fixed roof panel that adds surface area, while the convertible body ends at the fabric top. These figures are for a full color change wrap on the 1975–1981 TR7.

Is the top of a Triumph TR7 wrapped?

No, the fabric top of a Triumph TR7 is not wrapped. The film on the body ends where the fabric top begins. A folding hard top, if fitted, is wrapped as panels of its own.

Which Triumph TR7 body takes more film?

The coupe takes more film than the convertible. The convertible needs about 39 ft (12 m) of 60-inch (1.52 m) cast film, while the coupe needs about 43 ft (13 m). The coupe's fixed roof panel adds surface area over the convertible's fabric top, which is not wrapped.

Can I wrap only the hood or the roof of a Triumph TR7?

Yes, you can wrap only the hood or the roof of a Triumph TR7. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers window trim and badges, and paint protection film (PPF) covers the front end with clear film.